VEDINDUST SW620 HDMI Dual Monitor KVM Switch User Manual

VEDINDUST SW620 HDMI Dual Monitor KVM Switch

Safety and Notice

Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

Features

• Using only 1 set of keyboard, mouse to control 2 computer devices and 2 monitor.
• Available to use keyboard and mouse without any delay after switch input sources.
• Through two USB 2.0 hub ports, the mouse and keyboard can be connected to the
  • KVM. Through two USB 3.0 hub ports, barcode scanners, USB hard drives, or other high-speed USB devices can be connected to the KVM.
• Support resolution up to 4096*2160@60Hz.
• Support USB 3.0 transmission rate up to 5Gbps.
• Support front panel buttons and External switch button to control KVM to switch inputs.
• Support WindowsNista/XP and Mac OS, Linux and Unix ,Plug and Play.

Specifications

• Support Resolution: 4096.2160@60Hz
• Video bandwidth: up to 18Gbps
• USB transfer rate: up to 5Gbps
• Input cable distance: S5m@4K/60Hz
• Output cable distance : S5m@4K/60Hz
• Power consumption :  1W
• Input voltages: DC/12V
• Operating Temperature range: (-5 to +45C)
• Operating Humidity range: 5 to 90%RH {No Condensation)
• Storage Temperature: -2o•c – so•c / -4″F – 140″F
• Dimension {LxWx H) : 141X68X38 {mm)
• Net Weight : 270g

Package Contents

1. 4K HDMI KVM Switcher 1 pcs
2. DC12V power adapter 1 pcs
3. USB3.0 to Type-c Cable 2pcs
4. External controller kits 1 pcs
5. User manual 1 pcs

Connection Diagram

(Front Panel)

Note:

1. USB 2.0 Ports: Connect devices such as mouse, keyboard, etc.
2. USB 3.0 Ports: Connect devices such as high-speed USB devices, etc.
3. Switch button: PC1 and PC2 input select.
4. External control: Connect the external control switch.

Connection Diagram (Rear Panel)

Note:

1. PC1 IN: USB-C and HDMl1/HDMl2 cables, device connected to computer 1,
2. PC2 IN: USB-C and HDMI1/HDMl2 cables, device connected to computer 2
3. HDMI OUT: HDMI OUT 1 and OUT 2, connected to 2 HDMI display devices.

Troubles shootings

Before powering on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common troubles shootings way shows below:

1

|

Non-Power Connected

| 1. Check that the power adapter head is truly and correctly plugged into the power outlet.

2. Check whether the USB cable is correctly connected to the host computer.

3. Whether the HDMI cable is correctly connected to the host computer.

4. Whether the host computer is powered on normally.

2

|

The display has no image

|

1.  Please check whether the connection between the switcher and the monitor is correct.

2.  Please check whether the host computer is

properly powered on.

3.  Please check whether the computer host has the correct output image.

3

|

USB not working

| 1. Please check whether the switcher is connected to the USB-C port of the computer correctly.

2. Please check whether the computer USB port can work normally.

3. Please check whether the USB driver is correctly installed on the computer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>