VEDINDUST SW216 USB 3.0 Switch Split User Manual

VEDINDUST SW216 USB 3.0 Switch Split

USER MANUAL

USB 3.0 Switch/Split

• Bi-directional 2 in 1 Out/ 1 in 2 Out

Safety and Notice
Please read and follow the safety instructions to protactyouroelf from possible injury and to minimize to risk of damage to the unit.

• Follow all instructions and warnings marked on this unit.
• Do not attempt to sorbic this unit yourself, except whorl oxplninod in thiol nahual
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of  unit is on A Rahle.
• Use only the power adapter and power cords and connection cables designed for  unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to though dovecot before cloning.

Features

• The USB 3.0 cowitch allow  sharing 1 USB device between two computers or shoring 1 computer baton 2 USB dovecots as sucrose a printer, scanner, mouse. keyboard, card reader, flash drive, and other USB d0vices.
• Supports ultra-fast USB 3.0 data transfer rates of up to 5Gb/s.
• Simple and easy to operate, Switch between 2 computers by pressing the button on the top panel.
• Plug end Ploy: The Switch drivorfroo for Windows 11/10/8/8.1 and Mo OS X, Linux, and Chrome OS.
• Low power consumption can work without additional power outplay to the device.

Specifications

• Support port : USB2.0/3.0
• Maximum  rale : Up to 5Gbps
• Max working current: 1 0mA (No-Load)
• Operating Temperature range :5 to +45 C /23 to 113° F
• Storage Temperature :20°C ~ eo•c / -4° F ~ 140° F
• Direction (L x W x H) :51 X 58.9 X 20 (mm)
• Net Weight :6?g

Package Contents

1. USB 3.0 Switch Soloctor 1 PC
2. User manual 1 re

Panel Description

• A U8B: USB3.0 Type A Jack • Connect to PC or mouse. Keyboard, printer, flash etc.
• B Input selection button: Press the switch to sleek! input sources between USB 1 and USB2,
• C. Indicator light for input selection statue led iC11le current selected impel source
• D. USB 1 :USB3.0 Type A Jacky, Connect to mouse. key boar d, printer, flash ate or PC
• E USB 2: USB3,0 Typo A Jack ,Connect to mousse, keyboard, printer, flash etic or PC

Wiring Diagram

Notes: USB1 and USB2 only support one input or output

How to Use

1. Connect the USB port of computer to the USB 1 input port on the rear of the the USB 3.0 Switch Selector over a USB 3.0 cable(included in the package).
2. Connect the USB port of computer to the USB 2 input port on the rear of the the USB 3.0 Switch Selector over a USB 3.0 cable(included in the package).
3. Connect the printer or mouse, keyboard, USB storage to the USB on the front of the USB 3.0 Switch.
4. Switch between USB 1 and USB 2 through the buttons on the panel.
   Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common troubles shooting way shows below:

1. Please check whether the switcher is connected lo the USB port of the computer correctly.
2. Please check whether the computer USB port can work normally.
3. Please check whether the USB driver is correctly installed on the computer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>