VEDINDUST EX718 HDMI Splitter Extender 1×8 Extended HDMI Over Ethernet User Manual

VEDINDUST EX718 HDMI Splitter Extender 1×8 Extended HDMI Over Ethernet

HDMI Splitter Extender

1 in 8 out Over CAT5e/6 & POC ( With EDID management )

Safety and Notice

• Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

Features

• Support 1 HDMI input source distribute to 8 HDMI sink devices, UTP output ports connect via the cat5e/6 cable with the receivers.
• 1 Port HDMI loop output.
• Resolution reach up to 1080P.
• Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC.
• Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
• Lossless transmission.
• Easy to install.
• DC 12V power supply.
• Supported POC(Receiver power from Transmitter).
• Support for EDID management.

Specifications

• HDMI resolution ……………………………… 1080p/3D/1080i/720p/576p/5761/480p/480i
• Support video color format ………………………………………………………………… 24bit
• Support audio format ……… DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
• Max bandwidth ……………………………………………………………………………….. 165MHz
• Max baud rate ………………………………………………………………………………. 4.95Gbps
• Input/Output TMDS signal ………………………………………………. 0.5-1.5Volts p-p(TTL)
• Input/Output DDC signal ……………………………………………………….. 5Volts p-p (TTL)
• Input cable distance ………………………………. S1 Om AWG26 HDMI standard cable
• Output cable distance ………………………………………………….. S50m CAT5e/6 cable
• Max working current ………………………………………………………. 12V/950MA(9PORT)
• Power adapter format Input ………………………………. AC (50HZ, 60HZ): 100V-240V
• Operating Temperature range …………………………………………………….. (-0 to +4o·c)
• Operating Humidity range ………………………………. 5 to 90%RH (No Condensation)
• Storage Temperature ………………………………………….. -2o•c – eo•c / -4°F – 140°F
• Dimension (L x W x H) ……………………………………………………… 265×83.5×22 (mm)
• Net Weight ……………………………………………………………….. (With 8xReceiver)995g

Package Contents

1. 9-Port HDMI Splitte with 8 Receiver 1set
2. DC12V Power Adaptor 1pcs
3. User manual 1 pcs

Panel Description

1. ON/OFF: Power switch
2. LED:
3. Signal: HDMI input Indicator,
4. Power: Power Indicator
5. EDID: EDID selector switch

1. RJ45 OUT: RJ45 Output 1-8
2. HDMI OUT : HDMI Output
3. HDMI IN: HDMI input
4. DC12V: 12V power input

EDID Specification

EDID Mode:

• 000, 001, 010, 011, 100, 101: These six modes are fixed output modes, requiring the display to support the resolution and 3D function of the corresponding modes.
• 110: With the support of both the display and signal source, up to 1920×1200 resolution can be output.
• 111: Copy the EDID from the HDMI OUT port. When there are multiple displays, the HDMI OUT port needs to be connected to the display with the lowest resolution.

Wiring Diagram

Operating and Connecting

1. Connect the HDMI input source with the HDMI splitter via the HDMI cable.
2. Connect the HDMI Splitter with the receiver by the single cal5e/6 cable(The termination of the cable should follow the EIAITIA 568B standard).
3. Connect the HDMI display (such as the TV) with the Receiver by the HDMI cable.
4. Insert the Power supply into the HDMI splitter.
5. Adjust the required parameters according to the EDI □ table in the manual according to personal needs.

Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common troubles shooting way shows below:

1. Check if the power adaptor head is truly and correctly inserted the power socket.
2. Check the power switch if it is in on status.

No Picture|

1. Please to make sure that the connection devices has opened on and connected with the machine well.
2. Check if the signal source is on and well connected.
3. Check the system connection quality
4. Check if the line is all good quality.
5. Check the cable quality.

Obscure Picture|

1. Try again connect the cable to make sure the connection in good status .
2. Check the HDMI cable quality.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>