VEDINDUST 60M DMI Extender 200ft HDMI Over Ethernet User Manual

USER MANUAL 60M HDMI Extender

60M DMI Extender 200ft HDMI Over Ethernet

Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Our series of HDMI converters, switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient, more comfortable, more productive and more cost-efficient.
This is the 60M HDMI Extender over single cat5e/6 cable,Support EDID handling abilities.
Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

Features：

• Each set includes one sender and one receiver.
• Use single UTP LAN cable（Cat 6)to substitute HDMI cable to achieve long distance transmission,the UTP Cable follows the standard of IEEE-568B.
• Transmission distance extend up to 60 meters under 1080P.
• Supports Deep Color up to 36 bits.
• Supports lossless compressed digital audio:Dolby TrueHD, DTS-HD Master Audio.
• Lossless transmission.
• Data transfer speed 6.75 Gbps.
• DC 5V power supply.

Specifications:

HDMI resolution ……………………..3D /1080p/1080i/720p/576p/576i/480p/480i
Support video color format ……………………………24bit/deep color 30bit,36bit
Support audio format……………………………………………..DTS-HD/DolbytrueHD/LPCM7.1/DTS/Dolby- AC3/DSD
Max bandwidth……………………………………… ………………….…..2250MHz
Max baud rate……………….…….………………………….………….….6.75Gbps
Input/Output TMDS signal …….………..………………… .0.5~1.5Volts p-p(TTL)
Input/Output DDC signal ……….….………………..……..…… 5Volts p-p (TTL)
Input cable distance..…… …………….……………………….…….≤10m AWG26
HDMI standard cable Output cable distance………………..…..1080P 8-bit 50Mover single CAT5E/6/24AWG/Solid
Max working current……………………………………………….………5V/800MA
Power consumption………………………………………………………5watts(Maximum)
Power adapter format..Input: ….………..………..AC (50HZ, 60HZ) :100V-240V
Operating Temperature range……….…………..……-5 to +35℃(+23 to +95℉)
Operating Humidity range…………………….….5 to 90%RH (No Condensation)
Storage Temperature………………………………………-20°C ~ 60°C / -4°F ~ 140°F
Dimension (L x W x H)……………….………… …………………81.5×43.5×23(mm)
Weight…..…………………………..……………………..…………………….…250g
Notes

1. :Specifications are subject tochange without notice.Mass and dimensions are approximate.
2. Sink must support 3D video when source is 3D device
3. When in 36 Bits deep color mode,we suggest set the hdmi source device output resolution as 1080p or 720P.

Package List:

1. Main Unit: Sender & Receiver each 1pcs
2. DC 5V 1A x2PCS
3. User manual 1pcs

Panel Description:

1. Status: Status Indicator, Blue instruction power,Red instruction signal
2. HDMI input:HDMI input port
3. DC5V:Power input port
4. CAT 6: UTP input port
5. EDID:EDID button.

1>Copy mode: connect the display to the HDMI input port, then press the button, it’ll copy the EDID to the extender;
2>Reset EDID: Press the button for 3 seconds, it’ll reset the EDID to 1080P 3D stereo.

1. Status: Status Indicator, Blue instruction power,Red instruction signal
2. HDMI input:HDMI input port
3. DC5V:Power input port
4. CAT 6: UTP input port

Wiring Diagram:

Connecting and Operating

1. Connect the HDMI signal source (Such as PS3, STB etc)HDMI Sender over the HDMI cable
2. Connect CAT5e/ 6/7 cables withboth the outputs of the Sender and inputs of the Receiver over the utp port. (The cables must follow the standard of EIA-TIA 568B).
3. Connect receiver with the Display device(such as TV/Projector and so on) over the HDMI cable.
4. Connect the power adapter at the both Sender and receiver over the Power port
   Attention: Insert/Extract cables gently.

Notes:
Please use the machine as the instruction listed to keep the long use lifetime of the machine.

1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2. Make sure all parts will be free from the strong shake, hit, fall.
3. Touching the power adaptor with the wet hands is prohibited.
4. When cut off the adaptor from the socket,please hold the power adaptor head.don’t pull the adaptor cord.
5. If you don’t use it for a long time, please turn off the power.
6. Don’t open the cover and don’t touch the inside parts.
7. Please use the original factory power adaptor.

Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common troubles shooting way shows below:

correctly inserted the power socket.
2.Check the power switch if it is in on status.
2| No Picture| 1.Please to make sure that the connection devices has opened on and connected with the machine well. 2.Check if the signal source is on and well connected. 3.Check the system connection quality.
4.Check if the line is all good quality.
5.Check the cable quality
3| Obscure Picture| 1.Try again connect the cable to make sure the connection in good status.
2.Check the HDMI cable quality

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>