VSYSTO F9T 4 Inch Screen WiFi Positive Dash Cam User Manual

VSYSTO F9T 4 Inch Screen WiFi Positive Dash Cam

Product Accessories

After opening the package, please confirm whether the driving recorder is in good condition and the accessories are complete.

1. Host x 1
2. Cameras x 2
3. Power Cable
4. USB Test Cable x 1
5. Bracket x 1
6. Memory Card x 1(Optional)
7. GPS Module x 1(Optional)
8. Wired Remote Controller x 1
9. Tire Pressure Sensors x 3

“Optional” mean it is not a standard configuration. Please refer to the product description on the platform you purchased!

Product Appearance Diagram

With the advancement of technology, the product structure and parameters will continue to be improved. The pictures and texts in this book are for reference only. If there are pictures or descriptions that do not match the actual product, please refer to the actual display of the product.

How to use

1. Quick Test and Installation
   Please refer to the “Quick Installation Guide”.

2. Insert the Memory Card
   Insert the memory card into the card slot until you hear “Da”. If you want to take out the card, gently press the memory card and slowly release it after hearing “Da”.

Tips：

• Please insert the memory card in the correct direction.
• Please do not pull out the card when it is turned on to avoid damaging the video file and recorder.
• Please use the high speed Class10 or above genuine card.
• Please format the memory card regularly to keep it in good condition.

Power on/off

After the recorder is properly installed, the recorder will automatically turn on or off when the motorcycle is powered on or off(If there is no vibration for 5 minutes after the motorcycle flame out, the recorder will shut down; Or long press the up button of the remote controller for 3 seconds to shut down).

Video Recording

1. Normal Recording Mode
   After the motorcycle power is turned on, the recorder will automatically start recording, and the LED indicator on the remote controller will slowly flash. When the motorcycle power is off, the recorder will automatically stop recording(If there is no vibration for 5 minutes after the motorcycle flame out, the recorder will shut down; Or long press the up button of the remote controller for 3 seconds to shut down).

   • Loop Recording: The recorder will save a file after recording for a period of time (the default setting is 3 minutes). When the memory card is full, the system will delete the oldest file. You can manually set the time of video recording in APP. (1/2/3/5 minutes can be set, and front and rear lens files are saved in F and R folders respectively). The normal recorded video file is named “REC-xxxx”.

2. Emergency Recording Mode

   • G-Sensor emergency recording mode: When the motorcycle collides with other vehicles or the vibration is strong, the built-in G-Sensor will automatically activate the emergency recording mode. The LED indicator on the remote controller flashes rapidly. The emergency video file is named “GSR-xx”. You can set the sensor sensitivity level in the menu or APP. The higher the sensitivity, the easier to trigger G-Sensor.
   • Manual emergency recording mode: When the recorder is recording, short press the OK button to lock the current recorded video, and the front and rear cameras will capture a photo at the same time. The manually locked video file is named “KEY-xxxx”

Tips

• If the memory card is not inserted or is faulty, the video cannot be saved.
• “KEY” and “GSR” emergency video files can be saved 10 each. After more than 10, the system will automatically delete the earliest one.

View Video

1. View on Mobile Phone
   Connect the recorder via WiFi, and view the real-time and playback video on the mobile APP (Android& iOS).

2. View on Computer
   Put the memory card into the USB card reader, connect it to the available USB port on the computer, read the contents of the memory card, then select the video to play.

Scan the corresponding QR code to download the latest APP from Google Play or APP Store. Or you can search “WiFi Camera” on Google Play or APP Store to download and install it. DVR WiFi Default Name: MotoDV_XXX Default password: 1234567890

• App download for Android user
• App download for Apple use

Connection Steps:

1. Turn on the recorder;
2. Enter the WiFi setting interface of the phone, find the corresponding WiFi name, and enter the password to connect to WiFi;
3. Open mobile APP.

Tips

If “No network connection” is displayed when connecting to WiFi, please turn off the mobile data network first, and then connect to the recorder WiFi according to the steps. If the prompt “Current WLAN is unavailable, whether to switch to another network?” appears, you must click “No”.

• After entering the APP, the recorder will pause recording. Please click the red recording button on the APP to start recording. After exiting the APP, the recorder will start recording in 30 seconds.
• You don’t need to connect to WiFi for daily riding. Connect when you need to watch the video.
• In case of connection failure, please contact customer service.

Video File Format

W5T Wired Remote Controller Operating Instruction

Function Operation

Play Video Operation

In the video recording interface, long press the OK button once to switch to the setting interface. Use the up/down buttons to select the player icon. After selecting, short press the OK button once to enter the playback mode. Then select the video you want to play, and short press the OK button once to start the video. The default is the front camera video, long press the up button to switch to the rear camera video file.

License Plate Watermark Settings

To add license plate watermark, you need to create a new TXT document (Please contact customer service), edit the license plate number, and copy the document to the root directory of the memory card. Plug in the host again, it will automatically update when you turn it on, and you can see the watermark of the license plate number set when playing the video. If you want to delete the watermark of the license plate number, just find the system reset in the host menu setting interface. After resetting the system, the watermark will return to its default state.

ATTENTION

• There is a temperature sensor inside the wire remote controller. If the wire remote controller is operated, it is normal to find that the temperature of the recorder rises.
• The built-in temperature sensor has a deviation of 2 degrees Celsius.
• The license plate number watermark can only use English letters and numbers, and the license plate number with special characters cannot be added.

Images Information and Menu Description

1. After selecting, press to enter Recording Mode.

2. The icon becomes larger to indicate that the function is selected.

3. Character description on the display in recording mode:

4.  After selecting, press Playback Mode.

5. The icon becomes larger to indicate that the function is selected.

6. Press to select the video to playback

Long press for 3 seconds in the Playback Mode to switch to the video files list of front and rear camera

1. Front camera video files name identification: REC_ The year, month, day, and time of current video F.MOV

2. Rear camera video files name identification: REC_ The year, month, day, and time of current video R.MOV

3. After selecting, press  to enter Setting Mode.

4. The icon becomes larger to indicate that the function is selected

min/3min
5 Flameout detection| On/off
6 Parking monitoring

7.Parking monitoring

| On/off
sensitivity| Set the vibration sensitivity when parking
8 Recording Time After Flameout| Set recording time after flameout
9 Date format| 3 options, YYYY MM DD/MM DD YYYY/DD MM YYYY
10.Clock setting| Day&Time
11.Time zone selection| Time zone selection around the world
12.Speed watermark| Whether it is necessary to turn on/off the driving speed display when playing video on the computer
13.GPS status| Display the current number of satellites, longitude, latitude and other information
14.Unit system| Set the speed and temperature unit selection displayed when driving
15.Tire pressure function| On/off
16.TPMS installation guide| Positive and reversed three wheeled motorcycle installation reference pictures
17.Tricycle| Selection of tire pressure display diagram for positive and

reversed three wheeled motorcycle

18.Tire pressure unit| 2 unit options
19.Tire pressure alarm sound| On/off
20.Tire pressure alarm threshold| 20.Tire pressure alarm threshold
21.Rear camera mirror| Whether mirror selection is required for the rear camera display
22.Protect Level| G-Sensor sensitivity level adjustment
23.Button sound| On/off
24.Voice prompt| On/off
25.System reset| Restore to the factory default settings
26.WiFi mode| On/off
27.Format SD card| Delete all videos from the memory card
28.Operation guide| Introduce the operation method of the wire remote controller
29.FW version| Information about the current software version of the recorder

1. After selecting, press to enter Language Choosing Mode.
2. The icon be comes larger to indicate that the function is selected.

• Language identification — Corresponding to the selected language.
• The number of language choices depends on the actual model!

Auxiliary Display Mode

1. Long press the down button of the wirecontroller to enter the auxiliary display mode, an the driving speed is displayed on the first interface.
2. Short press the down button again to enter the tire pressure monitoring interface(optional)
3. Short press the down button again to enterthe battery power display interface
4. Short press the down button again to enter the GPS information interface
5. Short press the down button again to enter the current mileage short-term memory interface
6. Short press the down button again to enter the year, month, and day interface

Tips

• Speed,short-term memory,and location functions require GPS support.
• Battery voltage display requires smart power cable support.

Positive three-wheeled motorcycle **

**

Installation operation of positive three wheeled motorcycle

1. When installing the tire pressure of the positive tricycle, the recorder must be turned on. Long press the OK button to enter the host menu to find the setting icon, and short press the OK button to enter the setting interface to find the settings of the tricycle. Select the positive tricycle and return to the video interface after setting. Long press the remote control down button, and the auxiliary driving interface will pop up. Use the up and down buttons to find the tire pressure interface.
2. Take out the ① tire pressure sensor and tire pressure sensor gasket. First screw the gasket onto the front wheel air nozzle, and then screw the ① sensor onto the front wheel. After screwing the ① sensor, screw the tire pressure sensor gasket in the opposite
3. Take out the ② tire pressure sensor and tire pressure sensor gasket. First screw the gasket on the left rear wheel air nozzle, and then screw the ② sensor on the left rear wheel. After screwing the ② sensor, screw the tire pressure sensor gasket in the opposite direction until it is next to the tire pressure sensor. Then check whether the tire pressure value is displayed on the ② tire pressure icon on the recorder screen. Please refer to the installation picture of the positive tricycle.
4. Take out the ③ tire pressure sensor and tire pressure sensor gasket. First screw the gasket on the right rear wheel air nozzle, and then screw the ③ sensor on the right rear wheel. After screwing the ③ sensor, screw the tire pressure sensor gasket in the opposite direction until it is next to the tire pressure sensor. Then check whether the tire pressure value is displayed on the ③ tire pressure icon on the recorder screen. Please refer to the installation picture of the positive tricycle.

Reversed three wheeled motorcycle

Installation operation of reversed three wheeled motorcycle

1. When installing the tire pressure of the reversed tricycle, the recorder must be turned on. Long press the OK key to enter the host menu to find the setting icon, and short press the OK key to enter the setting interface to find the settings of the tricycle. Select the reversed tricycle and return to the video interface after setting. Long press the remote control down button, and the auxiliary driving interface will pop up. Use the up and down buttons to find the tire pressure interface.
2. Take out the ① tire pressure sensor and tire pressure sensor gasket. First screw the gasket onto the rear wheel air nozzle, and then screw the ① sensor onto the rear wheel. After screwing the ① sensor, screw the tire pressure sensor gasket in the opposite direction until it is next to the tire pressure sensor. Then check whether the ① tire pressure icon on the recorder screen has a tire pressure value. Please refer to the installation picture of the reversed tricycle.
3. Take out the ② tire pressure sensor and tire pressure sensor gasket. First screw the gasket on the left front wheel air nozzle, and then screw the ② sensor on the left front wheel. After screwing the ② sensor, screw the tire pressure sensor gasket in the opposite direction until it is next to the tire pressure sensor. Then check whether the tire pressure value is displayed on the ② tire pressure icon on the recorder screen. Please refer to the installation picture of the reversed tricycle.
4. Take out the ③ tire pressure sensor and tire pressure sensor gasket. First screw the gasket on the right front wheel air nozzle, and then screw the ③ sensor on the right front wheel. After screwing the ③ sensor, screw the tire pressure sensor gasket in the opposite direction until it is next to the tire pressure sensor. Then check whether the tire pressure value is displayed on the ③ tire pressure icon on the recorder screen. Please refer to the installation picture of the reversed tricycle.

Quick Installation Guide

Quick test

1. Connect the front and rear cameras to the host of the recorder.
2. Find the USB test cable from the accessory and connect the recorder with a 5V2A or above power back or USB charger. After the recorder is turned on, test the function of the recorder.
3. After the test shows that the recorder is normal, you can install it.

If the output voltage exceeds 5V, the recorder may be burnt.

Install products

During installation, it is recommended to install the extension cable first, and then connect the main unit and camera separately (so that the installation is easier). If the distance between the main unit and the camera is less than 0.5 meters, it is recommended not to use the camera extension cable (please keep the camera extension cable for future needs).

Installing the power cable

ACC Power Cable Connection Method: The red wire is connected to the positive pole of the motorcycle battery, the black wire is connected to the negative pole, and the yellow wire is connected to the positive pole of motorcycle key control (12V ACC power source).
Test is required after connection. After the motorcycle power is turned on, the recorder will turn on automatically. After the motorcycle flameout, the recorder is turned off. If you do not know the circuit of the motorcycle, it is recommended to find a professional person to install it.
Smart Power Cable Connection Method: The red wire is connected to the positive pole of the motorcycle battery, the black wire is connected to the negative pole, the black square box module is pasted in the place of strong vibration (This power cable is not suitable for electric vehicles).【The smart power cable comes with a separate ACC yellow wire. It can be freely connected or not, it will not affect the function of the recorder. The battery capacity is relatively small, or if you want to use ACC to control the recorder to turn on or off, you can connect the yellow wire.】 Tips: The power cords configured for different models are different. Please refer to the products actually purchased.

Notes for Using the Dash Cam

• This product is an auxiliary (vehicle driving recorder) prod uct for safe driving. Any loss caused by malfunction, information loss or using this product is irrelevant to our company.
• This product is an auxiliary devi ce for recording external images of vehicles. Due to the different driving environment and vehicle environments, some functions wil I not support. The unscheduled fi rmware upgrade in order to imp rove the prod uct will change the performance of the product, and sometimes the camera will not record due to the environment, so the driving images recorded in this product is for reference only. The state of memory card will also lead to camera cannot record.
• Although this product can record and save videos of accidents, it does not guarantee that all the accident videos can be recorded. Slight collision accidents can ‘t start the collision sensor, so the video may not be recorded in the specialized folder.
• Be sure to disconnect the power supply when inserting or pulling out memory card. For the stable use of the product, it is recommended to format the memory card twice a week.
• Generally memory card has a service life. Long-term use of memory card may cause the new data to be unable to save. In this case, it is recommended to buy a new memory card to use. Our company will not be liable for data destruction caused by the long-term use of memory card.
• Do not use high-pressure water gun or chemical solvent to clean the host, camera , power module and other parts (otherwise, no warra nty will be given).
• PIease do not use it in an environment with excessive dust density, so as to prevent cameras and other parts from being contaminated with dust, which will affect the video effect.
• Do not twist cables or cable connectors during installation, and keep the recorder host and wires away from high-pressure areas.
• Please replace the spark plug with a spark plug with appropriate R value if there is interference in some motorcycle models.
• Do not disassemble, modify or repair this equipment by yourself. If the recorder fails due to this, we will not provide after-sa les service.
• Some pictures, functions and specifications may change due to product or software upgrading. Please understand that we ca not notify you separately.
• or your safety, please do not install or operate this product while driving. Please use it within the scope permitted by law. Disclaimer: Tire pressure sensors may not fit all vehicle tires. Please consult your vehicle manual or a tire professional whether the tire pressure sensors are fit your car. If they affect your vehicle’s performa nce, drivi ng, or insura nce coverage,do not install it!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>