PARKSIDE PKH 2000 B1 Ceramic Fan Heater Instruction Manual

PKH 2000 B1 Ceramic Fan Heater
Instruction Manual

CERAMIC FAN HEATER

Operation and safety notes
This product is only suitable for well insulated spaces or occasional use.

IAN 393729_2104

Warnings and symbols used

The following warnings are used in this user manual and on the packaging:

**| DANGER! This symbol with the signal word “Danger” indicates a hazard with a high level of risk which, if not avoided, will result in serious injury or death.| W| Watts
---|---|---|---
**| WARNING! This symbol with the signal word “Warning” indicates a hazard with a medium level of risk which, if not avoided, could result in serious injury or death.| | Danger – risk of electric shock!
**| CAUTION! This symbol in combination with “Caution” marks a low- risk hazard that if not prevented could result in minor or moderate injury.| | NOTE: This symbol with the signal word “Note” provides additional useful information .
| Use the product in dry indoor spaces only| **| Symbol for protective earth
| Alternating current / voltage| | WARNING! Do not cover the product to prevent it from overheating.
HZ| Hertz (supply frequency)| ****| CE mark indicates conformity with relevant EU directives applicable for this product .

CERAMIC FAN HEATER

Introduction

We congratulate you on the purchase of your new product . You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning safety, use and disposal . Before using the product, please familiarise yourself with all of the safety information and instructions for use.
Only use the product as described and for the specified applications . If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use
The product can be used for short-term heating of rooms. It can also be used as a fan with the heating function turned off .
The product is not suitable for use in rooms where special conditions exist, such as a corrosive or potentially explosive atmosphere (dust, vapour or gas).
Do not use the product outdoors.
Any other use or modification of the product shall be deemed to be improper and entails a considerable risk of accidents.
The product is designed for household use; it is nosuitable for commercial use.
The manufacturer accepts no liability for damagecaused by improper use .
Scope of delivery
After unpacking the product, make sure that the product is in orderly condition . Remove all packaging materials before use.
1 x Ceramic fan heater
1 x Instruction manual

Description of parts
Before reading, unfold the page containing the illustrations and familiarise yourself with all the functions of the product.

1. Carrying handle
2. Control light
3. Temperature control
4. Heating level switch
5. Air outlet
6. Knurled screw
7. Power cord with power plug
8. Air inlet

Technical data

Input voltage: 220 – 240 V~,50 Hz
Nominal power consumption: 2000 W
Low heating level: 1100 W
High heating level : 2000 W
Fan operation : 20 W
Protection class: I/ ****
Certification: GS (TÜV Rheinland)

Safety instructions

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS! KEEP ALL SAFETY NOTICES AND INSTRUCTIONS FOR FUTURE REFERENCE!

In the case of damage resulting from non-compliance with these operating instructions the warranty claim becomes invalid! No liability is accepted for consequential damage! In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!
Children and persons with limitations

WARNING! DANGER OF DEATH AND ACCIDENTS FOR TODDLERS AND CHILDREN!
Never leave children unsupervised with the packaging material . The packaging material represents a danger of suffocation . Children frequently underestimate the dangers . Always keep children away from the packaging material.

CAUTION! This product is not a toy for children! Children are not aware of the dangers associated with handling electrical products.

• Children of less than 3 years should be kept away unless continuously supervised.

• Children aged from 3 years and less than 8 years shall only switch on/off the product provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved .

• Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the product or perform user maintenance.

• This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge
  if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved.

• Children shall not play with the product.

• Cleaning and user maintenance shall not be made by children without supervision.

DANGER! Risk of electric shock! Never attempt to repair the product yourself . In case of malfunction, repairs are to be conducted by qualified personnel only.
WARNING! Risk of electric shock! Do not immerse the product’s electrical components in water or other liquids . Never hold the product under running water.
CAUTION! Risk of electric shock! Do not use the product if it is damaged . Disconnect it from the power supply and contact your retailer in the event of damage.
WARNING! Risk of injury! Turn off the product and disconnect it from the power supply before cleaning and when the product is not in use.
WARNING! Improper use may result in personal injury.
Use the product only as described in the user manual.
Never attempt to alter the product in any way.

Setup instructions
The product must not be located immediately below a socket- outlet.
Do not use this product in the immediate surroundings of a bath, a shower or a swimming pool.
Always operate the product on an even, stable, clean, heatresistant and dry surface.
Use the product in dry indoor rooms only.
Fire/burn hazard and heat
CAUTION! Some parts of this product can become very hot and cause burns . Particular attention has to be given where children and vulnerable people are present.
WARNING! In order to avoid overheating, do not cover the product.

CAUTION! Fire hazard!
Do not cover the product’s air vents . Make sure the product has sufficient ventilation . Do not place the product in a cabinet.

• Do not operate the product near flammable materials such as curtains, furniture or other flammable materials.
• Keep the product at least 100 cm away from other objects (curtains, walls, etc .).
• Regularly remove dust and filth with a soft, dry cloth.
• Before use, always check the air inlet and outlet for debris and dust . An unclean air inlet or outlet prevents air from flowing through . This may result in the product overheating.
• Remove from the product’s heating area all firm, liquid and gaseous materials that might ignite.
• Never insert any fingers or foreign objects into the product’s openings.
• NEVER touch the heating elements with your hands.
• If you notice any smoke or unusual noises, immediately disconnect the product from the power supply . Have the product checked by a specialist before continued use.
• In the event of a fire, first pull the plug from the power outlet or disconnect the product from the power supply before taking appropriate fire-fighting measures.
• Never leave the product unattended while it is in use.

CAUTION! Fire hazard!
This product is not intended to be operated by means of an external timer or separate remote-control system . The product may be switched on, for example even when it is
covered.

• Do not move the product while it is in operation or cooling down.
• Do not use the product anymore if it has been dropped.
• Do not operate the product close to or below curtains, wall cupboards or other inflammable materials.
• Place the product on a level, stable and heat resistant floor.
• Do not place any open fire sources, such as candles, on the product.
• Never block the air outlet 5] or the air inlet 8].
• Do not use an extension cord.

Electrical safety

WARNING! Risk of electric shock! Use the product only with an RCD- protected socket- outlet.

• The product may not remain unattended as long as it is connected to the power supply.
• Make sure that the nominal voltage on the rating plate complies with the supply voltage.
• The product has increased energy consumption . Do not connect any other devices (e .g. heaters, air conditioners, etc .) to the same circuit.
• Shield the product, power cord and plug from dust, direct sunlight and dripping and splashing water.
• Protect the product from heat.
• Do not place the product in direct proximity to open flames or heat sources such as heaters, ovens or stoves.
• Protect the power cord from damage . Do not allow it to hang over sharp corners; do not crush or bend it . Keep the power cord away from any hot surfaces and open flames . Make sure that no one may accidentally pull on it or trip over it.
• Regularly check power plug and power cord for damages.
• Do not operate the product if the power cord or power plug are damaged, if the product does not work or is damaged in any way.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Do not operate the product with wet hands or while standing on a wet floor . Do not touch the power plug with wet hands.
• Do not use the product in very humid environments.
• Always turn off the product before disconnecting it from the power supply.
• Do not unplug the product by pulling on the power cord . Do not wrap the power cord around the product.
• Make sure that the details on the rating label are in conformity with your mains voltage.
• Only connect the product to alternating current with an earthing contact as otherwise a protection against electric shock is not provided.
• In the event of malfunctions, remove the mains plug from the mains socket.

Cleaning and storage

• Disconnect the product from the wall outlet during periods of disuse and before cleaning.
• Instructions on cleaning the product: see “Cleaning and care”.
• Store the product in a cool, dry place protected from sunlight and out of the reach of children.

Before first use

• Remove the packing materials .
• Check the product for any damages .

NOTE : The product may give off some vapours or odours during first use . These are production or transport residue that will quickly subside . There may also be quiet noises such as clicking or crackling . These will also quickly subside once the plastic parts have finally adjusted to the operating conditions.

Operation

Set-up location

• Place the product on an even, stable surface.
  Maintain the following clearances around the product:
  – 30 cm to the left, right, top, and rear
  – 100 cm to the front

• Turning on
  Set the temperature control [3] to and the heating level switch [4] to O .
  Connect the power plug [7] to an RCD-protected socket-outlet.

NOTES:

• Make sure that the supply voltage of the socket-outlet meets the requirements described in the “Technical data” chapter.
• Make sure that the power plug [7] is fully inserted into the socket-outlet.
• To turn on the product, turn the heating level switch 4] clockwise.

NOTES:

• Heating level switch [4] set to, ‘  or: Control light 2] on.
• Heating level switch [4] set to 0 :Control light [2] off.

Setting the temperature

• To regulate the temperature at high or low heating level, turn the temperature control [3] clockwise until it stops.
• As soon as the desired temperature has been reached, turn the temperature control [3] counter-clockwise until you hear a clicking sound.

NOTE : The integrated thermostat automatically turns the heating function on and off to keep the temperature at a constant level.

Adjusting the radiation angle
Changing the radiation angle of the air outlet [5]: Use the knurled screw [6] to turn the housing to the desired angle.
NOTE : Do not touch the product with wet hands or if the product’s housing is hot.
Turning off
NOTE : If you have used the product at high or low heating power, let the product run in fan mode for about 30 seconds . This will prevent heat build-up in the housing.

• Set the temperature control [3] to and the heating level switch [4] to 0.
• Disconnect the power plug [7] from the socketoutlet.

Overheating protection

• The product is equipped with overheating protection. If the product overheats, the heating element will turn off automatically.
  However, the fan continues to run so that rapid cooling is achieved. The product will turn on again automatically once it has cooled down properly.

WARNING! There is usually a reason for overheating! It can indicate a fire hazard!

• Check whether the product is giving off sufficient heat:
  – Is the product covered or is it too close to a wall or other obstruction?
  – Is the grid blocked in the front or at the back?
  – Is the fan blocked?

• Rectify the problem if possible, or contact the service hotline (see the section “Service”).

Troubleshooting

the power plug 7] to a socketoutlet.
The socketoutlet does nodeliver any voltage.| Check the house fuses.
The product does not heat up.| The heating level switch 4]is not turned on.| Set the heating level switch 4] to the desired operation mode.
The temperature control 3] is set to the lowest position.| Set the temperature control 3] to the highest position.
The heating element is defective.| Notify the customer service .

Transport

WARNING! Do not move the product while it is in operation or cooling down.
Carry the product by the provided carrying handle [1] only.

Cleaning and care

DANGER! Risk of electric shock! Always disconnect the power plug 7] from the socketoutlet before cleaning the product.
WARNING! Never immerse the product in water or other liquids. Never hold the product under running water.

• Wipe down the product with a slightly damp cloth.
• Do not let any water or other liquids enter the product interior.
• Do not use any abrasive, aggressive cleaners or hard brushes to clean the product.
• Let all parts dry completely after cleaning.
• Use a vacuum cleaner to clean the safety guards of the air inlet 8] and the air outlet 5] when they have become dirty.

Storage

• When not in use, store the product in its original packaging.
• Store the product in a dry, secure location away from children.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.
The product and packaging materials are recyclable, dispose of it separately for better waste treatment.
The Triman logo is valid in France only.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste . Information on collection points and their opening hours can be obtained from your local authority.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery . In the event of product defects you have legal rights against the retailer of this product.
Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase . The warranty period begins on the date of purchase . Please keep the original sales receipt in a safe location . This document is required as your proof of purchase.
Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty applies to defects in material or manufacture . This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e .g . batteries) or for damage to fragile parts, e .g . switches, rechargeable batteries or glass parts.

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (IAN 393729_2104) available as proof of purchase.
You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you . Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service Service Great Britain
Tel .:08000569216
E-Mail:[email protected]

Information requirements for electric local space heaters
Model identifier(s): Ceramic fan heater, PKH 2000 B1, HG07990

Heat output
Nominal heat output| Pnon| 2.0| kW
Minimum heat output (indicative)| Pmin| 1.0| kW
Maximum continuous heat output| Pmax. c| 2.0| kW
Auxiliary electricity consumption
At nominal heat output| elmax| 2.0| kW
At minimum heat output| elmin| 1.0| kW
In standby mode| elSB| N/A| kW
Item| Unit
---|---
Type of heat input
Manual heat charge control, with integrated thermostat| No
Manual heat charge control with room and/or outdoor temperature feedback| No
Electronic heat charge control with room and/or outdoor temperature feedback| No
Fan assisted heat output| No
Type of heat output/room temperature control
Single stage heat output and no room temperature control| No
Two or more manual stages, no room temperature control| No
With mechanic thermostat room temperature control| Yes
With electronic room temperature control| No
Electronic room temperature control plus day timer| No
Electronic room temperature control plus week timer| No
Information requirements for electric local space heaters

Model identifier(s): Ceramic fan heater, PKH 2000 B 1, HG07990
Item| Symbol| Value| Unit| Item| Unit
| Other control options
Room temperature control, with presence detection| No
Room temperature control, with open window detection| No
With distance control option| No
With adaptive start control| No
With working time limitation| No
With black bulb sensor| No
Contact details| OWIM GmbH & Co. KG
StiftsbergstraBe 1
74167 Neckarsulm
GERMANY

PDF ONLINE
www.lidl-service.com
OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model No.: HG07990
Version: 10/2021
IAN 393729_2104

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>