OMOTON KB525 Bluetooth Keyboard User Manual

June 15, 2024
OMOTON

OMOTON KB525 Bluetooth Keyboard User Manual

Specifications

Product Dimensions: 433.1×122.8×13.1mm
Operating Range: ≤ 33ft (10m)
Operating Voltage: 3.1-4.2V
Operating   Current: 0.2-0.8mA
Standby Current: ≤30uA
Lifespan: 5 million clicks

Package Content

  • 1x User Manual
  • 1x Wireless Keyboard
  • 1 x USB- C Cable

Compatible System

Mac OS

Product Overview

USB- C Micro Charging Port: Used for charging the keyboard.

LED lights

  1. When Baery is low, red color indicator will flash.
  2. Baery indicator light flashes red during charging, when keyboard is fully charged, red light will turn o automatically.
  3. Caps Lock is activated when the indicator light is in green.

Specify a keyboard type on Mac:

  1. On your Mac, choose Apple menu > System Preferences, then click Keyboard.
  2. Click Change Keyboard Type, then follow the onscreen instructions.

Hot Keys and Media Keys

  • Escape

  • Decrease Brightness

  • Increase Brightness

  • Open Mission Control

  • Open Launchpad

  • Prev Track

  • Play/Pause

  • Next Traci

  • Mute

  • Decrease Volume

  • Increase Volume

  • Eject

Pairing

  1. Turn on the keyboard.
  2. Press Fn + BT simultaneously to enter Pairing mode. For example, press Fn + BT1 to enter pairing mode for Channel BT1.
  3. Press and hold BT1 for 5 seconds. Wait until you see the BT1 blue light flashes.
  4. Turn on Bluetooth of your Mac to automatically search for remote devices.
  5. Tap “OMOTON Keyboard” to start pairing.
  6. Once the pairing is completed, the blue LED light will stop flashing. (It works same for BT2, BT3)
  7. You can switch Bluetooth Channels by pressing Fn + BT1/BT2/BT3, after paired.

Power Management

Power Saving Mode

The keyboard will automatically go to sleep when not in use for 30 minutes. Press any buon and wait 3 seconds to reactivate it.

Auto-reconnect

If you turn o the keyboard and turn it back on, the keyboard will be automatically connected to the device it paired last time. Which means if you use BT1 and connect to device 1 before you turn it o, it will aempt to reconnect to device 1 through channel BT1 after you turn it on.

Charging

  1. Use the included USB-C cable for charging. Connect one end to a USB-C adapter and the other to the keyboard. (USB-C adapter is not included)
  2. During the charging process, the power switch indicator will turn red. When the electricity is full, the light goes o. Generally, it takes approximately 2 hours for a full charge.

Note: You can use the keyboard while it is being charged. But we don’t suggest such operation, as this may damage the built-in baery to a certain extent.

Troubleshooting

If you cannot connect the Bluetooth keyboard to your device, or if the keyboard is not working, please try the following:

  1. Ensure your Mac has Bluetooth and Bluetooth is enabled.
  2. Restart the Mac and try to pair again.
  3. Cancel the Bluetooth connection with other devices, and try to pair again.
  4. Check to see if the Bluetooth software has been updated recently. If not, update the software and try to pair again.
  5. Make sure the Bluetooth keyboard is within 33ft (10m) of your device

Important Safeguards and Precautions

  1. SAVE THESE INSTRUCTIONS— They contain essential safety and operating instructions.
  2. For indoor use only. Do not expose the keyboard to direct sunlight or wet conditions.
  3. Do not use the keyboard if equipment is damaged.
  4. Do not disassemble the product. Disassembly can result in safety hazards.
  5. Do not throw or shake the product.

Web:www.omoton.com
E-mail: service@omoton.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals