nVent RBM266785F LENTON End Alignment Fitting Owner’s Manual
- June 15, 2024
- nVent
Table of Contents
nVent RBM266785F LENTON End Alignment Fitting
Product Information
Specifications
- Catalog Number: RBM266785F
- Material: Acciaio (Steel)
- Rebar Size, Metric: 36 mm
- Rebar Size, US: #11
- Rebar Size, Canada: 35M
- Height: 64 mm
- Diameter 1: 76 mm
- Diameter 2: 65 mm
Features
- Durable, re-usable and long lasting
- Easily replaced if damaged
- Split-collar design allows for easy installation and removal
Additional Product Details
Diameter 2 is the mating surface for the outside diameter of the appropriate sleeve. Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
Diagrams
Warning
- Europa Netherlands: +31 800-0200135
- France: +33 800 901 793
- Europa Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: +86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Our powerful portfolio of brands: nVent.com, CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF, TRACER. All trademarks and registered trademarks belong to their respective owners. nVent reserves the right to change specifications without notice.
Product Usage Instructions
Step 1: Preparation
Prior to installation, make sure you have the necessary tools and equipment:
- End alignment fitting
- Sleeve
- Reinforcing steel
- Packing materials
- Installation manual
Step 2: Sleeve Placement
- Select the appropriate sleeve for your application.
- Place the sleeve onto the reinforcing steel.
- Ensure the end alignment fitting properly locates the sleeve onto the reinforcing steel.
Step 3: Packing Material Retention
The end alignment fitting also retains the packing materials and holds them in place. This helps ensure a leak-free installation.
Step 4: Installation and Removal
The split-collar design of the end alignment fitting allows for easy installation and removal. Follow the instructions provided in the installation manual for proper installation and removal techniques.
Step 5: Safety Precautions
Before starting the installation process, read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Adhere to all safety precautions to prevent accidents or injuries.
Step 6: Special Orders
If the required size of the end alignment fitting is not shown, you may be able to order it as a special order. Contact your nVent LENTON representative for more information on special orders.
FAQ (Frequently Asked Questions)
Q: Can the end alignment fitting be reused?
A: Yes, the end alignment fitting is durable, reusable, and long-lasting. It can be easily replaced if damaged.
Q: What is the purpose of diameter 2?
A: Diameter 2 is the mating surface for the outside diameter of the appropriate sleeve. It ensures proper alignment and connection.
Q: How do I contact nVent LENTON for more information?
A: You can contact nVent LENTON through their representatives. Refer to the warning section for contact details specific to your region.
End alignment fittings properly locate the sleeve onto the reinforcing steel. The fittings also retain the packing materials and hold them in place, which helps ensure a leak-free installation.
FEATURES
- Durable, re-usable and long lasting
- Easily replaced if damaged
- Split-collar design allows for easy installation and removal
CARATTERISTICHE DEL PRODOTTO
- Material: Acciaio
- Rebar Size, Metric: 36 mm
- Rebar Size, US: #11
- Rebar Size, Canada: 35M
- Height: 64 mm
- Diameter 1: 76 mm
- Diameter 2 : 65 mm
ADDITIONAL PRODUCT DETAILS
- Diameter 2 is the mating surface for the outside diameter of the appropriate sleeve.
- Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON
- Cadweld Rebar Splicing System Instruction Manual.
- Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
America del Nord
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europa
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europa
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>