OMOTON KB088 Wireless Keyboard User Manual
- June 12, 2024
- OMOTON
Table of Contents
KB088 Wireless Keyboard
User Manual
KB088 Wireless Keyboard
Functional Description
| Home Button
---|---
Decrease Brightness
Increase Brightness
Lisj Search
Print Screen
Virtual Keyboard
| Last Song
Play! Pause
Next song
Mute
Decrease Volume
Increase Volume
Lock/Unlock
LED Indicators
| Fn indicator | This indicator turns on to signal a working connection |
|---|---|
| Caps lo ck indicator | This indicator turns on to signal that Caps lock mode is |
active
Battery levels Indicator| • When the keyboard is turned on, this indicator
will flash
• When you press Fn + C, a blue light will start flashing to indicate
connectivity.
•When the battery is low, a red light will flash to indicate that it’s time to
change the keyboard batteries.
How to pair the keyboard with your Device:
- Insert 2 AM batteries into the battery slot.
- Slide the power switch from OFF to ON. The battery indicator will flash when you switch it ON.
- Hold down the Fn key, and then press the C key to enter connection mode (Fn + C). The battery indicator will flash continuously.
- Turn on your device’s Bluetooth. Search for available devices to connect to. Select “Bluetooth keyboard” when it appears on your device’s list.
- The battery level indicator will stop flash when the keyboard is paired with your device. You can also search “OMOTON K02 Bluetooth Keyboard with Sliding stand” on YouTube for our official instructional video.
Compatible with the Following Devices :
All iPad Series
All iPhone Series
Please Note: The screen capture feature enabled by the F4 key is not
supported by these newer devices since the “Home” key is no longer included as
a feature.
How to Use the Stand
- Slide the stand out until its fully extended.
- Open up the stand so it’s mouth is facing the back of your device.
- Place device on stand.
Note: Do not use excessive force when using the stand. This can result in
damaging or breaking the stand.
Tablets should be placed horizontally on the stand (as shown)
Attention :
- The sliding stand works best with devices between 4.0 to 10.5 inches.
- Keep the stand closed when not in use to avoid damaging it.
- Turn off the keyboard when not in use to conserve energy.
- Never apply liquids directly onto the keyboard. Clean the keyboard with a cleaning cloth dampened with alcohol or an antibacterial liquid.
Troubleshooting
- Ensure your device’s Bluetooth software has been successfully installed and that Bluetooth is enabled.
- Check to see if the Bluetooth software has been recently updated. If it has, try pairing again. If it hasn’t, update the software and then try pairing again.
- Restart your device and try pairing again.
- Install new batteries and try pairing again.
- Ensure the Bluetooth keyboard is within at least 33 feet/ 10 meters of your device.
- Remove other Bluetooth peripherals. Depending on your device, your system may be slow if not equipped to connect to multiple Bluetooth peripherals.
- The keyboard will automatically go into power savings mode after 10 minutes of inactivity. Press any key and wait 2-3 seconds to reactivate the keyboard.
Package Includes
1 x OMOTON Keyboard with Sliding Stand
lx User Manual
Search “OMOTON” on Amazon.com for more products
Web:www.omoton.com
E-mail support@omoton.com
Made in China
114.13.00.007633