OMOTON M503 Bluetooth Wireless Mouse User Manual
- June 14, 2024
- OMOTON
Table of Contents
- OMOTON M503 Bluetooth Wireless Mouse
- Product Information
- Product Usage Instructions
- Specifications
- Package Contents
- Compatible Systems
- Product Overview
- Instructions for Use
- Preparations for the Mouse
- Cursor Speed Control (DPI)
- Power management
- Troubleshooting
- Important Safeguards & Precautions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
OMOTON M503 Bluetooth Wireless Mouse
Product Information
- Product Name: Wireless Mouse M503
Specifications:
- Compatible Systems: iPadOS 13/ MacOS 10.15.5 or newer; Windows 7/ 8/ 10; Android system
- Package Contents: 1 x Wireless Mouse, 1 x User Manual
Product Overview:
- Left Button
- Right Button
- Scrolling Wheel
- The Blue Indicator Light
- Bluetooth Connection Button
- ON/OFF Slider
Product Usage Instructions
Preparations for Pairing with iPad
ATTENTION:
- Make sure the system of your iPad has been updated to iPadOS13 or newer.
- Go to Settings – Select Accessibility – Turn on the Assistive Touch.
- Enable the Bluetooth function of your iPad. Note: The same preparation goes for iPhone Series.
Preparations for the Mouse
BATTERY INSTALLATION STEPS:
- Open the battery cover.
- Insert one AA battery.
- Cover the battery cover.
Note:
Open the battery cover and install one AA battery. The ON/OFF slider should be
in the ON position.
- Press and hold the Bluetooth connection button for more than 3 seconds until the blue light flashes quickly. You can start pairing now.
- Select and click “BT5.0 Mouse” on your device. The connection is completed.
Cursor Speed Control DPI
Press the vertical scrolling and right button for more than 3 seconds at the
same time to switch among 800/1200/1600 DPI.
- First press for toggling to 800 DPI.
- Second press for toggling to 1200 DPI.
- Third press for toggling to 1600 DPI.
Power Management
Power Saving Mode:
The mouse will automatically go to sleep after 30 minutes of inactivity. Press
any button and wait 3 seconds to reactivate it.
Replacing Batteries
Lift the battery compartment cover up. Replace the spent battery with one new
AA battery and put the cover back on (Battery not included).
Note:
Make sure that the positive (+) and negative (-) terminals are on the correct
sides.
Troubleshooting
If you cannot connect the Bluetooth mouse to your device, or if the mouse is
not working, please try the following:
- Make sure your device has Bluetooth and Bluetooth is enabled.
- Restart the device and try to pair again.
- Install a new battery and try to pair again.
- Cancel your device’s Bluetooth connection with other devices, and try to pair again.
- Check to see if the Bluetooth software has been updated recently. If it hasn’t, update the software and try to pair again.
- Make sure the Bluetooth mouse is within 33ft / 10m of your device.
Important Safeguards & Precautions
- SAVE THESE INSTRUCTIONS. They contain essential safety and operating instructions.
- Please remove the battery when the mouse is not in use for a long period of time.
- For indoor use only. Do not expose the mouse to direct sunlight or wet conditions.
- Do not use the mouse if equipment is damaged.
- Do not disassemble the product. Disassembly can result in safety hazards.
- Do not throw or shake the product.
Contact Information:
- Web: www.omoton.com
- E-mail: service@omoton.com
Made in China.
Specifications
- Connection Mode: Bluetooth
- Bluetooth Edition: BT 5.0
- Lifespan : 3 million clicks
- Number of Buttons: 3
- DPI Levels: 800/1200/1600 DPI
- Operating Range: 33 ft/10 m
- Battery: 1 x AA battery
- Net Weight: 55g ± 5g
- Dimensions: 110 x 63 x 23 mm
Package Contents
- 1 x Wireless Mouse
- 1 x User Manual
Compatible Systems
- iPadOS 13/ MacOS 10.15.5 or newer;
- Windows 7/8/10;
- Android system
Product Overview
- Left Button
- Right Button
- Scrolling Wheel
- The Blue Indicator Light
- Bluetooth Connection Button
- ON/OFF Slider
Instructions for Use
Preparations for Pairing with iPad
ATTENTION
- Make sure the system of your iPad has been updated to iPadOS13 or newer.
- Go to Setting-Select Accessibility-Turn on the “Assistive Touch”.
- Enable the Bluetooth function of your iPad.
Note: The same preparation goes for iPhone Series.
Preparations for the Mouse
BATTERY INSTALLATION STEPS
Note:
Open the battery cover and install one AA battery.
- The ON\OFF slider should be in the ON position.
- Press and hold the Bluetooth connection button for more than 3 seconds until the blue light flashes quickly. You can start pairing now.
- Select and click “BT5.0 Mouse ” on your device. The connection is completed.
Cursor Speed Control (DPI)
Press the vertical scrolling and right button for more than 3 seconds at the same time to switch among 800/1200/1600 DPI.
- First press for toggling to 800 DPI;
- Second press for toggling to 1200 DPI;
- Third press for toggling to 1600 DPI.
Power management
Power Saving Mode
The mouse will automatically go to sleep after 30 minutes of inactivity. Press
any button and wait 3 seconds to reactivate it.
Replacing Batteries
Lift the battery compartment cover up. Replace the spent battery with one new
AA battery and put the cover back on (Battery not included).
Note:
Make sure that the positive (+) and negative (-) terminals are on the correct
sides.
Troubleshooting
If you cannot connect the Bluetooth mouse to your device, or if the mouse is not working, please try the following:
- Make sure your device has Bluetooth and Bluetooth is enabled.
- Restart the device and try to pair again.
- Install the new battery and try to pair again.
- Cancel your device’s Bluetooth connection with other devices, and try to pair again.
- Check to see if the Bluetooth software has been updated recently. If it hasn’t, update the software and try to pair again.
- Make sure the Bluetooth mouse is within 33ft/10 m of your device.
Important Safeguards & Precautions
- SAVE THESE INSTRUCTIONS-They contain essential safety and operating instructions.
- Please remove the battery when the mouse is not in use for a long period of time.
- For indoor use only. Do not expose the mouse to direct sunlight or wet conditions.
- Do not use the mouse if equipment is damaged.
- Do not disassemble the product. Disassembly can result in safety hazards.
- Do not throw or shake the product.
Contact Information
- Web: www.omoton.com
- E-mail: service@omoton.com.
Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>