OMOTON PB001 Power Bank User Manual

OMOTON PB001 Power Bank

Product Overview

1. Wireless Charging
2. Power Indicators
3. Type-C Input and Output
4. Switch
5. Kickstand

Specifications

• Capacity : 10000mAh
• Type-C Output: DC 5V=3A/9V =2.22A/12V =1.67A
• Battery : Polymer
• Type-C Input : DC 5V-3A/9V= 2A
• Wireless Output : 15W Max
• Working Temperature:- 10°C~40°C

Package List

• 1 x Magnetic Power Bank
• 1x Charging Cable
• 1x User Manual

Compatible Mobile

1. Can be used as a magnetic wireless portable charger for iPhone 12 and above series.
2. Can be used as normal magnetic wireless charger for other phones supporting Qi protocol/OP/HW/XM/ SAM.
3. Can be used as a portable charger for 99% of cellphone which is tiny and easy to carry.
4. Can be placed on the desktop with stand as wireless charger while watching.

Features

1. 10000mAh capacity & pocket-Size.
2. Fast Wireless max at 15 W and Wired Charging at 20W max with USB-C PD output.
3. Accurate LED power indicators help to check remaining power and function.
4. Foldable stand to hold your iPhone (horizontally or vertically) when charging, free your hands
5. Supporting wireless charging and wired charging for 2 phones at the same time.
6. Sync input and output for portable charging.
7. High quality safe polymer battery with built-in smart PCB to protector your device from overcharging. overcurrent, over-current, over-voltage and short circuit.

Power Indicators

Power indicators to monitor the power status.

1. Checking remaining power :
   Click the button, the withe lights will displayed as shown below

2. light on, the power is within 25%.

3. lights on, the power is within 50%.

4. lights on, the power is within 75%.

5. lights on, the power is within 100%.
   When the last light of the light flashes, the battery level is less than 5%, please charge it as soon as possible.

6. Checking charging function:

In use, when the first light turns blue, it indicates that the wireless fast charging function is on. When the fifth light turns orange, it means it is fast charging mode.

Wireless Charger Function Instructions

• Put your phone on the wireless charger, it will snap to your phone immediately and turn on the wireless charging function automatically.
• When you charge the power bank first, and the input status is fast charging mode, then use the wireless charging function to charge your phone, it supports fast charging output. If you use wireless charging function to charge your phone first, then charge the power bank, only 5W wireless charging output is supported.
• When the power bank is fully charged with the cable connected, using the wireless charging function to charge your phone, only 5W output is supported due to the charging protocol to 5V input state. Unplugging the cable when the power bank is fully charged, it can automatically restart and the wireless charging becomes fast charging mode.
• When the the power bank being charged with the PD12V charger, the wireless charging function is off because the wireless charger does not support 12V output.

Notes and Warnings

• If this device is idle for a long time, please charge it at least every 3 months.
• It might produce slight heat during charging, which is normal as long as it’s below 55 C.
• Always keep this device dry and do not clean it with chemical agents.
• Please care for the environment and recycle this device at designated place. Children must use it under the guidance of adults.
• Do not crash, disassemble, impale or put this device into humid conditions.
• Do not use it to charge devices with incompatible current and voltage, which will cause fire or other problems.

FAQ

1. The power bank can not be charged
   Please check if the adapter is suitable, and the cable, adapter is connected well.

2. The power bank didn’t work

3. It maybe the power is too low, please charge it in time. The voltage of power bank is not compatible with the device’s.

4. The connection is not ok (cable, plug) If above are checked OK, please contact support team for help.

Important Safeguards and Precautions

1. SAVE THESE INSTRUCTIONS- They contain essential safety and operating instructions.
2. Do not use the products if equipment is damaged.
3. Do not disassemble the products. Disassembly can result in safety hazards.
4. Do not throw or shake vigorously the products.
5. Keep away from fire.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>