OMOTON KB522 Bluetooth Keyboard Compatible User Manual
- June 9, 2024
- OMOTON
Table of Contents
OMOTON KB522 Bluetooth Keyboard Compatible
Specifications
- product Dimensions: 11.6 x 5.3 x 0,5inch (294.4×134,9x13mm)
- Operating Range: s 33ft (10m)
- Operating Voltage: 3.0-4.2V
- Operating Current: <4mA
- Number of Buttons: 79
- lifespan: 5 million clicks
- Weight: 400-5g
Package Includes
- 1xWireless Keyboard
- 1x User Manual 1xUs8 Charging Cable
Compatible Systems
- Windows/ MAC OS/ OSI Android
Product Overview
- Type-C Micro Charging Port: For charging the keyboard.
LED Indicators
-
Power Indicator : The power indicator will be red for 2-3 seconds when the power switch turns on,
-
Low Battery Indicator: Red light will flash when the battery runs low. When the battery runs out, the keyboard will turn off automatically.
Charging Indicator: Red light will be on when the keyboard is charging and the light off once fully charged. -
Caps Lock Indicator: The Caps Lock indicator will be green when the Caps Lock key is activated.
Bluetooth Status Indicator: Press “The Fn +C keys to enter pairing mode and the indicator flashes blue.
Hot Keys and Media Keys
Note:
- If you want to enable the Fl-F12 keys in the Windows system, you can press “Fn+ F1-F12” directly or press release it.
- The language of the device settings and the Hardware Keyboard should be the same as the keyboard language.
Pairing Steps
- Step 1. Switch ON/OFF to “ON” to turn your keyboard on, the red light will fash for 2-3 seconds.
- Step 2. Press the “Fn+C” keys together to enter pairing mode, the pairing indicator will flash blue to signal Bluetooth pairing.
- Step 3. Verify your device’s Bluetooth settings are on. Select “Settings- Bluetooth On” in your device.
- Step 4. Select “OMOTON Keyboard” from your device’s list of available devices to complete pairing.
- Step 5. The indicator will turn off after successfully paired.
Power Saving Mode
- The keyboard will enter sleep mode after 30 minutes of inactivity. Press any key to wake up.
Power Steps
- Use the included USB cable for charging. Connect one end to a USB charger, and the other to the keyboard. (USB charger is not included.)
- In charging, the power indicator will turn red. Generally, it takes approximately 2-3 hours for a full charge. (Output: DC 5V/500mA)
Troubleshooting
If you cannot connect the Bluetooth keyboard to your device, or if the keyboard is not working. please try the following steps:
- Ensure your device has Bluetooth and Bluetooth is enabled.
- Restart the device and try to pair again.
- Cancel the Bluetooth connection with other devices, and try to pair again.
- Check to see if the Bluetooth software has been updated recently. If it hasn’t update the software and try to pair again.
- Make sure the Bluetooth keyboard is within 33ft (10m) of your device.
Important Safeguards and Precautions
- SAVE THESE INSTRUCTIONS- They contain essential safety and operating instructions.
- For indoor use only. Do not expose the keyboard to direct sunlight or wet conditions.
- Do not use the keyboard if the equipment is damaged.
- Do not disassemble the product. Disassembly may result in safety hazards.
- Do not throw or shake the product.
- Web:www.omoton.com
- E-mail:support@omoton.com
- Made in China
Documents / Resources
|
OMOTON KB522 Bluetooth Keyboard
Compatible
[pdf] User Manual
KB522 Bluetooth Keyboard Compatible, KB522, Bluetooth Keyboard Compatible,
Keyboard Compatible
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>