moonki MAUI MS-900B Bluetooth Speaker User Manual
- September 5, 2024
- moonki
Table of Contents
**moonki MAUI MS-900B Bluetooth Speaker User Manual
**
Wireless connection
- To pair the speaker to a wireless device, press MODE repeatedly on the player’s display until this mode is selected.
- Enable the connection on your device.
- When the device shows the speaker in the connection list, confirm the pairing.
CAUTION:
BEFORE USE SPEAKER BOX, PLEASE CHARGE BATTERY FULLY, IT IS BETTER FOR BATTERY LIFE. DON’T PLAY SPEAKER BOX AND CHARGE BATTERY AT THE SAME TIME, OTHERWISE IT WILL AFFECT BATTERY LIFE.
Packing Contents
- 1 x Speaker
- 1 remote control.
- 1 x user manual
- 1 x Warranty card
- 1 x power cord 1
- x Wired Microphone
Specifications
- 6.5″ Active speaker with rechargeable battery
- PMPO Power: 900W
- Power Supply: AC 100-240V – 50/60Hz or rechargeable battery 6.5″ Woofer – 510g Magnet (110mm diameter)
- 1″ Tweeter
- Sensibility: 88dB (+/- 3dB)
- Rechargeable battery: 12V – 3000mAH
- Remote control + microphone cabling
Panel Specification
ECHO function:
It’s located on control panel, with eco control. Sing song or talk with eco function will reach good effection.
Treble / Bass potentiometer:
Can control the bass, treble of speaker box (line input and mp3 INPUT), also it can control microphone’s treble and bass.
- Play/Pause : Press to play a song or pause while playing a song.
- Previous: Press once to jump previous song/Press and hold to diminish the volume level.
- Next: Press once to jump to next song/ press and hold to raise the volume level.
- Cycle play : To select a player mode, the options are:
- One: Select this to play current song indefinitely
- All: With this option you can repeat all music
- Model: Select an operating modality
CAUTION:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>