INTEX 58671 Deluxe Swim Vest Instructions
- June 13, 2024
- INTEX
Table of Contents
INTEX 58671 Deluxe Swim Vest
Product Information
- Product Name: 215 SGS 3-6 Swim Vest
- Manufacturer: Unknown
- Date of Manual: 08/11/2021
- Standards: EN 13138-1:2014
- Languages: Greek, Czech, Croatian, Latvian, Lithuanian, Slovak,Slovenian, Romanian, Bulgarian, Turkish, Serbian, Hungarian
Product Usage Instructions
- Check the weight of your child in the provided table to ensure it is within the allowed weight range for using this product. Follow the weight of the child, not the age.
- WARNING – THIS PRODUCT DOES NOT PROTECT AGAINST DROWNING. – IT SHOULD ONLY BE USED UNDER CONSTANT SUPERVISION. – ALWAYS FULLY INFLATE ALL AIR CHAMBERS. – REGULARLY CHECK THAT ALL VALVES ARE SECURELY INSERTED. – DO NOT ALLOW SMALL CHILDREN TO BITE OR CHEW ON THE PRODUCT.
- Keep these instructions for your reference.
- In case of damage, dispose of the product and replace it with a new one.
Instructions in Different Languages
- Greek, Czech, Croatian, Latvian: UCHOVEJTE TYTO INSTRUKCE PRO VASI POTEBU
- Lithuanian, Slovak, Slovenian, Romanian: PELDVESTES LIETOSANAS PAMCBA
- Bulgarian, Turkish, Serbian, Hungarian: NAVODILA ZA PLAVALNI JOPIC
SWIM VEST INSTRUCTIONS
Ensure that your child is within the weight guidelines by referring to the enclosed table. Refer to child’s weight, not to age.
WARNING
- WILL NOT PROTECT AGAINST DROWNING.
- USE ONLY UNDER CONSTANT SUPERVISION.
- ALWAYS FULLY INFLATE ALL AIR CHAMBERS.
- ENSURE THE STOPPERS ARE FULLY INSERTED BY CHECKING REGULARLY.
- DO NOT ALLOW CHILDREN TO BITE OR CHEW THE PRODUCT AS PIECES THAT MAY BE BITTEN OFF/TORN FROM/COME AWAY FROM THE MATERIAL MAY CAUSE A CHOKING HAZARD.
How to inflate and install
- Inflate each section by mouth while squeezing the valve lightly at its base. Insert the stopper into the valve and recess the valve by pushing down firmly on it. Never over-inflate or use high pressure air to inflate.
- Place swim vest on upper torso of child and snap the vest buckles together. Ensure a snug and comfortable fit by adjusting the buckle straps. Be sure the vest firmly fits around the child’s upper body.
How to deflate and remove
- Pull stopper out and squeeze the valve at its base until deflated.
- Unfasten vest buckles (Fig 1-3) and remove vest from child’s upper body.
Maintenance and storage
- Rinse the swim vest in fresh water and then air dry them thoroughly before storing them in a dry and room conditioned area out of sun light.
- Storage should not be with other heavy objects laying on the swim vest.
- Check seams and the foil regularly for tears and holes. If there are any defect please discard the products and replace by a new one.
SAVE THESE INSTRUCTIONS
The product is a personal protective equipment classified as category II, in conformity with the European Regulation (EU) 2016/425.
Guidance
- Approximate body weight: age group / A titre uniquement indicatif.
Date of obsolescence: 5 years from the production date shown on the inflation valve base. This device provides additional buoyancy in the water when learning to swim.
EU DECLARATION OF CONFORMITY
Declare the conformity in accordance with the following Regulation and/or
Directive(s) if applicable: Regulation (EU) 2016/425
This declaration of conformity is issued under the sole responsibility of the
manufacturer: INTEX TRADING B.V., VENNEVELD 9, 4705 RR ROOSENDAAL, THE
NETHERLANDS
Item No.: 58660EU, 58671EU.
Product Description: Swim Vests
The object(s) of the declaration described above is/are in conformity with the
following standard(s), community harmonization legislation(s):
EN13138-1:2014 – BUOYANT AIDS FOR SWIMMING INSTRUCTION PART1:
SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN.
The notified body (SGS United Kingdom Limited, Notified Body Number 0120) performed the EU type-examination (Module B) and issued the EU type- examination certificates.
| Item No. | Certificate No. |
|---|---|
| 58660EU | FI20/965773 |
| 58671EU | FI18/961152 |
Signed for and on behalf of:
INTEX TRADING B.V., VENNEVELD 9, 4705 RR ROOSENDAAL, THE NETHERLANDS
Place of issue: 858#, WENGJIAO ROAD, HAICANG DISTRICT, XIAMEN CITY,
FUJIAN PROVINCE, CHINA
By: Zoran Madzar, INTEX TRADING B.V. – Global Compliance
©2021 Intex Marketing Ltd. – Intex Development Co. Ltd. – Intex Recreation Corp. All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten.Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>