OMOTON KB508 Rechargeable Bluetooth Wireless Keyboard User Manual

Table of Contents

OMOTON-KB508-Rechargeable-Bluetooth-Wireless-Keyboard-
product

$OMOTON-KB508-Rechargeable-Bluetooth-Wireless-Keyboard- fig- $1$$

Low Battery Indicator: When the voltage is low, the red indicator light flashes once a second.
Charging Indicator: When charging, the red indicator light is on; When fully charged, the green indicator light is on.
Caps Lock Indicator: When the Caps Lock key is activated, the green indicator light is on.
Numeric Indicator: The numeric indicator will be green when the Num Lockis activated
Power Indicator: When the keyboard has been turned on, the power indicator light is on green for 3 seconds.
Bluetooth Status Indicator: When press “Fn + C” keys, the blue light flashes slowly to enter into Bluetooth pairing mode.
Power Switch: Switch to the right to turn on the keyboard and to the left to turn off.

$OMOTON-KB508-Rechargeable-Bluetooth-Wireless-Keyboard-fig- $6$$

Note:

If you want to enable the F1-F12 keys in the Windows system, you can press F1-F12 directly. (Go to “system Preferences-keyboard” for Mac)
To use the shortcut keys in the Windows system, hold the “En” key while pressing the desired shortcut key or press “In+ Esc ” to release it.
The language of the device settings and the Hardware Keyboard should be the same as the keyboard language.

Step 1. Switch On/Off to turn your keyboard on.
Step 2. Press the “Fn + ” keys together to enter pairing mode.
Step 3. Verify your device’s Bluetooth settings are on. Select “Settings – Bluetooth – On”.
Step 4. Select “OMOTON Keyboard” from your device’s list of available devices to complete pairing.
Step 5. The blue indicator will turn off after successfully paired.

Power Saving Mode
The keyboard will enter sleep mode after being inactive for 30 minutes. Press any key to wake up.

Use the included USB cable for charging. Connect one end to a USB charger, and the other to the keyboard. (USB charger is not included)
In charging, the power indicator will turn red. The power indicator turns green once fully charged. Generally, it takes approximately 2 hours for a full charge.

If you cannot connect the Bluetooth keyboard to your device, or if the keyboard is not working, please try the following steps:

Ensure your device has Bluetooth and Bluetooth is enabled.
Delete the pairing name on the Bluetooth settings. Restart the device and try to pair again.
Cancel the Bluetooth connection with other devices, and try to pair again.
Check to see if the Bluetooth software has been updated recently. If it hasn’t, update the software and try to pair again.
Make sure the Bluetooth keyboard is within 33ft (10m) of your device.

SAVE THESE INSTRUCTIONS contain essential safety and operating instructions.
For indoor use only. Do not expose the keyboard to direct sunlight or wet conditions.
Do not use the keyboard if equipment is damaged.
Do not disassemble the product. Disassembly can result in safety hazards.
Do not throw or shake the product.

Web: www.omoton.com
E-mail: service@omoton.com
Made in China