LEXON LR152 Flip Premium LCD Alarm Clock User Manual

LEXON LR152 Flip Premium LCD Alarm Clock

OVERVIEW

1. Clock & Alarm mode – ON sign faces up

2. Clock mode only – OFF sign faces up
   

3. Date (DD/MM or MM/DD format)

4. Time (12h/24h format)

5. Alarm time

6. Battery level
   

7. Lock system

8. MIN: Adjust minutes

9. HR: Adjust hours

10. SET/

    • Press and hold to turn ON/OFF the device
    • Press once to set the time

11. USB Type-C port

FEATURES

• Reversible LCD alarm clock with ON/OFF faces
• Easy to read & backlit LED display
• Time, Date & Alarm
• Selectable 12- or 24-hour formats
• Snooze
• Touch light-up sensor
• Sound sensor
• Display dimmer
• Lock system
• Rechargeable on USB-C port

CHARGING INSTRUCTIONS

We recommend you to fully charge the battery before using Flip Premium for the first time.

1. Plug the provided USB Type-C cable into the charging port at the back of the device.
2. Plug the USB end of the cable into any powered-on computer or any 5V USB power adaptor (not included).
3. A charging icon will display on the LCD screen when charging.
4. When fully charged, the battery icon remains solid.

When battery is low, the battery icon will keep flashing until the device power completely run out. It takes about 3 hours to fully charge Flip Premium.

TIME & DATE SETTING

Important note : The Flip Premium has a built-in battery that allows it to operate without being constantly plugged in.
When not plugged in, the LED display automatically switches OFF when the room is quiet and lights up again when you touch the device, tap on your bedside table or when it detects noise.
The LED backlight will be ON for about 5 seconds before automatically switching OFF.

Flip Premium can be permanently plugged in with a 5V USB power adaptor. When plugged in, the LED display stays on permanently.

First set up

1. Press and hold SET/ button for 3 seconds to turn on Flip Premium
2. Press – or + or HR or MIN buttons to select the time format (12/24-hour format). Press SET button to confirm.
3. Press HR and MIN buttons to adjust the time. Press the SET button to confirm.
4. Press HR or MIN buttons to set the date (MM/DD-DD / MM format)*. Press the SET button to confirm

*The date format is set based on the selected time format.

Normal mode

1. Press SET button
2. Press HR and MIN buttons to adjust the time. Press the SET button to confirm.
3. Press HR or MIN buttons to set the date. Press the SET button to confirm.
4. Press – or + or HR or MIN buttons to select the time format (12/24-hour format). Press SET button to confirm.
5. Press – or + or HR or MIN buttons to adjust the brightness. By default, the brightness is set to level 2. Press SET button to confirm.

ALARM SETTING

1. Position your Flip Premium with the ON sign facing up. Alarm time will appear on the right of the LCD screen.
2. Press HR and MIN buttons to adjust the alarm time.
3. Make sure the ON sign keep facing up to enable the alarm feature.
4. To turn it off, simply flip your device opposite side with OFF sign facing up or press any button on the back of the device.

Alarm will ring following the below pattern:

Snooze

• To snooze the alarm, simply tap on the top of your alarm clock. The alarm will sound again after 6 minutes.
• To stop the snooze, simply flip your device opposite side with OFF sign facing up.
• To turn on the alarm for next day, simply flip your device opposite side with ON sign facing up.

Backlight

• At night, tap on the top of your alarm clock or gently tap on your bedside table (thanks to the noise detection sensor) to light up the screen

Lock system

Flip Premium has a lock button that can be used while travelling to disable the alarm, turn off the light and save the time. When the lock system is ON and the alarm clock is not plugged in, the LED display –:–

If you want to plug in Flip Premium without being disturbed by the permanent display, the lock system allows you to switch off the display. The display will only light up when you touch the device, tap on your bedside table or when it detects noise.

SAFETY INFORMATION

• Read Instructions – All the safety and operating instructions should be read before the appliance is operated.
• Retain Instructions – The safety and operating instructions should be retained for future reference.
• Water and Moisture – The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.
• Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat.
• Power Sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

PRODUCT SPECIFICATIONS

• Dimensions : 10,4 x 6,5 x 2,6 cm
• Weight : 167 gr
• Material : ABS/Aluminium/PC
• Battery type : 18650 lithium battery
• Battery capacity : 2000 mAh
• Battery voltage : 3.7V
• Normal usage time : Up to 3 months (Battery life may vary depending on brightness & alarm setting, conditions of use and ambient temperature)
• Charging time : 3 hours
• Charging system : Rechargeable on USB Type-C cable (cable included)
• Input : DC 5V
• Frequency band : 1700-2700 Hz
• International warranty : 1 year

EUROPEAN UNION

CE DIRECTIVE

 LEXON hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the directives 2014/30/EU & 2011/65/EU.
The original EU declaration of conformity may be found at:
https://www.lexon-design.com/assets/certifications-ce-flippremium.pdf

DISPOSAL AND RECYCLING INFORMATION

 After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies : electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

USA – FCC STATEMENT

 This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Notice:

Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device

This Class B digital apparatus complies with Canadian ICES-003.

Customer Support

125, Avenue des Champs-Elysees – 75008 Paris – FRANCE All brands or product names are or may be trademarks or their respective owners.
Pictures and specifications are not contractual. Assembled in China.
lexon-design.com

Documents / Resources

| LEXON LR152 Flip Premium LCD Alarm Clock [pdf] User Manual
LR152 Flip Premium LCD Alarm Clock, LR152, Flip Premium LCD Alarm Clock, Premium LCD Alarm Clock, LCD Alarm Clock, Alarm Clock, Clock
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>