AJAX 86-454 KeyPad Plus Instruction Manual

: June 15, 2024
: ajax

Table of Contents

AJAX 86-454 KeyPad Plus
Product Information
Functional Elements
Operating Principle
Product Usage Instructions
Adjusting Backlighting and Volume
Frequently Asked Questions (FAQ)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AJAX 86-454 KeyPad Plus

AJAX-86-454-KeyPad-Plus

Product Information

Specifications

Product Name: KeyPad Plus
Updated on: September 5, 2023
Compatibility: Hub Plus, Hub 2, Hub Hybrid, and Hub 2 Plus running on OS Malevich 2.11 and newer
Connection: Not compatible with Hub and integration modules of ocBridge Plus and uartBridge

Functional Elements

Indicator for the enabled mode
Indicator for the disabled mode
Indicator for Partial Arm mode
Indicator for the trouble mode
Pass/Tag reader
Numerical touchpad holder
Function button
Reset button
Arm button
Disarm button
Partial Arm button
SmartBracket mounting panel (slide the panel down to remove it)
Do not remove the perforated part of the holder. It is necessary to activate the tamper detector if an attempt is made to disassemble the keypad.
Power button
Tamper button
KeyPad QR code

Operating Principle

KeyPad Plus enables the security of the entire facility or individual groups and allows for Partial Arm activation. You can operate the security modes with KeyPad Plus using:

Codes: The keypad supports general and personal codes, as well as arming without entering a password.
- Keyboard code: A general code set for the keypad. If used, all events are delivered in the Ajax apps on behalf of the KeyPad.
- User code: A personal code set for users connected to the hub. If used, all events are delivered in the Ajax apps on behalf of the user.
- Keyboard access codes: Set for a person who is not registered in the system. If used, all events are delivered in the Ajax apps with the name associated with this code.
The number of personal codes and access codes depends on the hub model.

Before entering a code or using a Tag/Pass, you need to activate (wake up) KeyPad Plus by sliding your hand from top to bottom across the touch panel. When activated, the key backlighting is turned on, and the keypad emits a beep sound.

KeyPad Plus is equipped with LED indicators that indicate the current security mode and keypad troubles (if present). The security status is only displayed when the keypad is active (the device’s backlighting is on).

You can use KeyPad Plus without ambient lighting as the keypad has backlighting. When you press the keys, you’ll hear an audible signal. The brightness of the backlighting and the volume of the keypad can be adjusted in the settings. If you do not touch the keypad for four seconds, KeyPad Plus reduces the brightness of the backlighting. Eight seconds later, it enters power-saving mode and turns off the display.

Product Usage Instructions

Activation
To activate KeyPad Plus, slide your hand from top to bottom across the touch panel. The key backlighting will turn on, and the keypad will emit a beep sound.

Using Codes
To use codes with KeyPad Plus, follow these steps:

Make sure KeyPad Plus is activated.
Enter the desired code using the numerical touchpad.
Press the appropriate button for the desired action (Arm,
Disarm, or Partial Arm).

Using Tags/Passes
To use tags or passes with KeyPad Plus, follow these steps:

Make sure KeyPad Plus is activated.
Place the tag or pass near the Pass/Tag reader.
The appropriate action (Arm, Disarm, or Partial Arm) will be carried out automatically.

Adjusting Backlighting and Volume

You can adjust the brightness of the backlighting and the volume of KeyPad Plus in the settings. Follow these steps:

Make sure KeyPad Plus is activated.
Press the Function button.
Enter the appropriate code or use a tag/pass to access the settings menu.
Using the numerical touchpad, navigate to the backlighting or volume settings.
Adjust the desired setting using the Function button and numerical touchpad.
Press the Arm button to save the changes and exit the settings menu.

Frequently Asked Questions (FAQ)

Q: Which hub models are compatible with KeyPad Plus?
A: KeyPad Plus is compatible with Hub Plus, Hub 2, Hub Hybrid, and Hub 2 Plus running on OS Malevich 2.11 and newer.

Q: Can I use KeyPad Plus with ocBridge Plus or uartBridge integration modules?
A: No, KeyPad Plus does not support connection with Hub and the ocBridge Plus and uartBridge integration modules.

Q: How do I activate KeyPad Plus?
A: To activate KeyPad Plus, slide your hand from top to bottom across the touch panel. The key backlighting will turn on, and the keypad will emit a beep sound.

Q: How many personal codes and access codes can I set?
A: The number of personal codes and access codes depends on the hub model. Please refer to the hub’s user manual for more information.

Email

Inschrijven