LAMAX Sounder2 Play Wireless Speaker Instructions
- June 12, 2024
- LAMAX
Table of Contents
LAMAX Sounder2 Play Wireless Speaker Instructions
Controls
Others
- LED __
- Microphone
- AUX __
- Power supply input
- MicroSD card slot
LED indicators when pairing
Flashing blue – speaker is ready for pairing Glows blue – speaker is paired
Flashes blue-white – speaker is ready for TWS pairing
On/Off
To turn on the speaker, hold down the POWER button. The LED will light up and an audible signal will sound. Hold the same button to turn the speaker off.
Pairing
- Turn on the speaker by holding down the POWER The LED will flash blue indicating the speaker is ready to pair.
- Activate the Bluetooth connection on your phone or other Select „LAMAX Sounder2 Play“ from the list of available devices. When pairing is successful, the speaker will beep and the LED will turn blue.
If there are pairing problems, reset the speaker by holding the MODE button for 6 seconds. Then proceed as described in step 1. of the Pairing section.
TWS
To pair two speakers with each other, turn on both speakers and make sure they are not paired with a multimedia device. Press the TWS button on the speaker you select as the main speaker. An audio signal will sound and the LED will flash blue and white. After a short time, the other speaker will beep, the LED will turn blue and auto- matically connect to the main speaker. Then pair the main speaker with your multimedia device as described in step 1 in the Pairing section. The main speaker will function as the left channel and is used to control the call functions.
To unpair the speakers, press the TWS button on the main speaker. Pairing this speaker with other LAMAX models using LAMAX Beat- Share® is only possible if the Sounder2 Play is the main speaker.
Switching between music sources
Press the MODE button to switch between Bluetooth, microSD card and AUX sources. By connecting a microSD card or the included 3.5mm audio cable, the speaker automatically switches to the appro- priate mode. When playing via the audio input, you cannot control the songs directly on the speaker.
Charging
Flashing red – speaker battery has almost run out Glows red – speaker is
charging
LED off – speaker is charged
The speaker can be charged using the included USB cable from a suitable USB
device – adapter, PC, or power bank. Do not charge the speaker with an input
voltage and current higher than 5 V/2 A as this may damage the speaker.
Specifications
The latest version of the manual can be downloaded here:
lamax.cz/sounder2-play/manual
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>