AJAX Smart Button Wireless Panic User Manual

: October 30, 2023
: ajax

AJAX Smart Button Wireless Panic

Button is a wireless panic button with protection against accidental press and additional mode to control automation devices.
It is compatible with Ajax hubs only and has no support for ocBridge Plus and uartBridge integration modules. Button is connected to the security system and configured via Ajax apps on iOS, Android, macOS, and Windows. The users are alerted of all alarms and events via push notifications, SMS, and phone calls (if enabled).

Functional Elements

Alarm button
Indicator lights
Button mounting hole

Operating Principle

Button is a wireless panic button that, when pressed, transmits an alarm to users, as well as to the security company’s CMS. In Control mode, Button allows you to control Ajax automation devices with a short or long press of a button.
In panic mode, the Button can act as a panic button and signal about a threat, or inform about an intrusion, as well as a ?re, gas or medical alarm. You can choose the type of alarm in the button settings. The text of alarm noti?cations depends on the selected type, as well as the event codes transmitted to the central monitoring station of the security company (CMS).
You can bind the action of an automation device Relay, WallSwitch or Socket ) to a button ( press in the Button settings — Scenarios menu.
The Button is equipped with protection against accidental press and transmits alarms at a distance of up to 1,300 m from the hub. Please be aware that the presence of any obstructions that impede the signal (for example, walls or ?oors) will reduce this distance.
Button is easy to carry around. You can always keep it on a wrist or a necklace. The device is resistant to dust and splashes.
When connecting Button via radio signal range extender, note that Button does not automatically switch between the radio networks of the radio signal extender and the hub. You can assign Button to another hub or range extender manually in the app.

Connecting the Button to the Ajax Security System

Prior to initiating connection:

Follow the hub instructions to install the Ajax application.
Create an account, add a hub to the app, and create at least one room.
Enter the Ajax app.
Activate the hub and check your internet connection.
Ensure that the hub is not in armed mode and is not being updated by checking its status in the app.

Only users with administrative rights can add a device to the hub.

In order to connect a Button:

Click on Add Device in the Ajax app.
Name the device, scan its QR code (located on the package) or enter it manually, select a room and a group (if group mode is enabled).
Click Add and the countdown will begin.
Hold the button for 7 seconds. When the Button is added, the LEDs will flash green once.

For detection and pairing, the Button must be located within the hub radio communication zone (on the single protected object). The connected button will appear in the list of hub devices in the application. Updating the statuses of the device in the list does not depend on the polling time value in the hub settings. Data is updated only by pressing the Button.
Button is a wireless panic button with protection against accidental press and additional mode to control automation devices.
Button is connected to the security system and configured via Ajax apps on iOS, Android, macOS, and Windows. The users are alerted of all alarms and events via push noti?cations, SMS, and phone calls (if enabled).

States

Button statuses can be viewed in the device menu:

Parameter	Value
Battery Charge	Battery level of the device. Two states available:

ОК
Battery discharged

How battery charge is displayed in Ajax apps

Operating mode| Displays the operating mode of the button. Three modes are available:

Panic
Control

| Mute Interconnected Fire Detectors Alarm
---|---
LED Brightness| Displays current brightness level of indicator light:

Disabled (no display)
Low
Max

Protection against accidental activation| Displays the selected type of protection against accidental activation:

Off — protection disabled.
Long press — in order to send alarm you should hold the button down for more than 1.5 seconds.
Double-pressing — in order to send alarm you should double-press on the button with a pause of no more than 0.5 seconds.

ReX| Displays the status of using a radio signal range extender
Temporary Deactivation| Displays the status of the device: active or completely disabled by the user
Firmware| Button firmware version
ID| Device ID

Configuration

You can adjust the device parameters in the settings section:

Parameter	Value
First field	Name of the device, can be changed
Room	The choice of the virtual room that the device is assigned to
Operating mode	Displays the operating mode of the button. **Three modes are

available:**

Panic — sends an alarm when pressed
Control — controls automation devices by short or long (2 sec) pressing
Mute Interconnected Fire Detectors Alarm — when pressed, mutes the fire alarm of FireProtect/FireProtect Plus detectors. The option is available if Interconnected Fire Detectors Alarm feature is enabled
__

Learn more

---|---
Alarm type (available only in panic mode)| Selection of the Button alarm type:

Intrusion
Fire
Medical
Panic button
Gas

The text of SMS and notifications in the application depend on the selected type of alarm

LED Brightness| This displays the current brightness of the indicator lights:

Disabled (no display) Low
Max

Accidental press protection (available only in panic mode)| Displays the selected type of protection against accidental activation:

Off — protection disabled.
Long press — in order to send alarm you should hold the button down for more than 1.5 seconds.
Double press — in order to send alarm you should double-press on the button with a pause of no more than 0.5 seconds.

Alert with a siren if panic button is pressed| If active, sirens added to the system are activated after panic button pressing
---|---
Scenarios| Opens the menu for creating and configuring scenarios
User Guide| Opens the Button user guide
Temporary Deactivation| Allows a user to deactivate the device without deleting it from the system.
The device will not execute system commands and participate in automation scenarios. The panic button of a deactivated device is disabled
Learn more about device temporary deactivation
Unpair Device| Disconnects Button from the hub and deletes its settings

**Operating indication

**

Button status is indicated with red or green LED indicators.

Category	Indication	Event
Linking to security system	Green LEDs flash 6 times	The button is not

registered in any security system
Lights up green for a few seconds| Adding a button to the security system
Command delivery indication|

Lights up green briefly

| Command is delivered to security system

Lights up red briefly

| Command is not delivered to security system
Long press indication in Control mode| Blinks green briefly| Button recognized the pressing as a long press and sent the corresponding command to the hub
Feedback Indication
(follows the Command Delivery Indication )| Lights up green for about half a second after the command delivery indication| The security system has received and performed the command
---|---|---
Briefly lights up red after the command delivery indication| The security system did not perform the command
Battery status
(follows Feedback Indication )| After the main indication it lights up red and goes out smoothly| Button battery needs to be replaced. At the same time, button commands are delivered to the security system
Battery Replacement

Use cases

Panic Mode

As a panic button, the Button is used to call for security company or help, as well as for emergency notification through the app or sirens. Button support 5 types of alarms: intrusion, fire, medical, gas leak, and panic button. You can choose the type of alarm in the device settings. The text of alarm notifications depends on the selected type, as well as the event codes transmitted to the central monitoring station of the security company (CMS).
Consider, that in this mode, pressing the Button will raise an alarm regardless of security mode of the system.
Button can be installed on a ?at surface or carried around. To install on a ?at surface (for example, under the table), secure the Button with double- sided adhesive tape. To carry the Button on the strap: attach the strap to the Button using the mounting hole in the main body of the Button.

Control Mode

In the Control mode, the Button has two pressing options: short and long (the button is pressed for more than 3 seconds). These pressings can trigger the execution of an action by one or more automation devices: Relay, WallSwitch, or Socket.
To bind an automation device action to a long or short press of a Button:

Open the Ajax app and go to the Devices tab.
Select Button in the list of devices and go to settings by clicking the gear icon
Select the Control mode in the Button mode section.
Click the Button to save the changes.
Go to the Scenarios menu and click Create scenario if you are creating a scenario for the ?rst time, or Add scenario if scenarios have already been created in the security system.
Select a pressing option to run the scenario: Short press or Long press.
Select the automation device to execute the action.
Enter the Scenario Name and specify the Device Action to be executed by pressing the Button.
- Switch on
- Switch off
- Switch the stateWhen configuring a scenario for Relay, which is in pulse mode, the Device Action setting is not available. During the scenario execution, this relay will close/open the contacts for a set time. The operating mode and pulse duration are set in the Relay settings.
Click Save. The scenario will appear in the list of device scenarios.

Mute Interconnected Fire Detectors Alarm

By pressing the Button, the interconnected are detectors alarm can be muted (if the corresponding operating mode of the button is selected). The reaction of the system to pressing a button depends on the state of the system:

The Interconnected Fire Detectors Alarm have already propagated — by the first press of the Button, all are detectors sirens are muted, except for those that registered the alarm. Pressing the button again mutes the remaining detectors.
The interconnected alarms delay time lasts — the siren of the triggered FireProtect/FireProtect Plus detector is muted by pressing.

Learn more about Interconnected Fire Detectors Alarms
With the OS Malevich 2.12 update, users can mute fire alarms in their groups without affecting detectors in the groups to which they do not have access.

Placement
Button can be fixed on a surface or carried around.

How to x Button

To fix Button on a surface (e. g. under a table), use Holder.
To install the button in the holder:

Choose a location to install the holder.
Press the button to test whether the commands can reach the hub. If not, choose another location or use a radio signal range extender.
When connecting Button via radio signal range extender, note that Button does not automatically switch between the radio networks of the radio signal extender and the hub. You can assign Button to another hub or range extender manually in the app.
Fix Holder on the surface using the bundled screws or double-sided adhesive tape.
Put Button into the holder.
Please note that Holder is sold separately.

Buy Holder

How to carry around Button
The button is convenient to carry with you thanks to a special hole on its body. It can be worn on the wrist or around the neck, or hung on a key ring.
Button has an IP55 protection rating. This means that the device body is protected from dust and splashes. Tight buttons are recessed into the body and software protection helps to avoid accidental pressing.

Maintenance

When cleaning the key fob body, use cleaners that are suitable for technical maintenance.
Never use substances containing alcohol, acetone, gasoline and other active solvents to clean the Button.
The pre-installed battery provides up to 5 years of key fob operation in normal use (one press per day). More frequent use may reduce battery life. You can check battery level at any time in the Ajax app.
Keep new and used batteries away from children. Do not ingest battery, Chemical Burn Hazard.
The pre-installed battery is sensitive to low temperatures and if the key fob is cooled significantly, the battery level indicator in the app may show incorrect values until the key fob becomes warmer.
The battery level value is not updated on a regular basis, but only updates after pressing the button.
When the battery has run down, the user will receive a notification in the Ajax app, and the LED will steadily light up red and go out each time the button is pressed.
How long Ajax devices operate on batteries, and what affects this
Battery Replacement

Technical Speciation

Number of buttons	1
LED backlight indicating command delivery	Available
Protection against accidental activation	Available, in panic mode
Radio communication protocol	Jeweller

Learn more
Radio frequency band| 866.0 – 866.5 MHz
868.0 – 868.6 MHz
| 868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
Depends on the region of sale.
---|---
Compatibility| Operates with all Ajax hub s , and radio signal range extenders featuring OS Malevich
2.7.102 and later
Maximum radio signal power| Up to 20 mW
Radio signal modulation| GFSK
Radio signal range| Up to 1,300 m (without obstacles)
Power supply| 1 CR2032 battery, 3 V
Battery life| Up to 5 years (depending on frequency of use)
Protection class| IP55
Operating temperature range| From -10°С to +40°С
Operating humidity| Up to 75%
Dimensions| 47 × 35 × 13 mm
Weight| 16 g
Service life| 10 years

Compliance with standards

Complete Set

Button
Pre-installed CR2032 battery
Double-sided tape
Quick Start Guide

Warranty

The warranty for the products manufactured by the AJAX SYSTEMS MANUFACTURING limited liability company is valid for 2 years after purchase and does not extend to the bundled battery.
If the device does not function properly, we recommend that you ?rst contact the support service as technical issues can be resolved remotely in half of the cases!
Warranty obligations
User agreement