AJAX NA-FA Hub 2 4G Jeweller User Guide

AJAX NA-FA Hub 2 4G Jeweller

Product Specifications

• Model: FD83E3%13B7
• Color: Black
• Power: 766753)
• Dimensions: C230(3@!$1

Product Usage Instructions

Unboxing and Setup

• When you receive the product, carefully unbox it and ensure all components are included. Follow the user manual for step-by-step setup instructions.

Powering On the Product

• Connect the power source to the product and press the power button to turn it on. Wait for the device to boot up completely before proceeding.

Basic Operations

• Use the provided remote control or buttons on the product to navigate through menus and settings. Refer to the user manual for specific functions and operations.

Maintenance and Cleaning

• Regularly clean the product using a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals that may damage the surface of the product.

Frequently Asked Questions (FAQ)

Q: How do I reset the product to factory settings?

• A: To reset the product to factory settings, navigate to the settings menu and look for the ‘Reset’ or ‘Restore’ option. Follow the on-screen instructions to complete the reset process.

Q: What should I do if the product displays an error code?

• A: If you encounter an error code on the product, refer to the user manual for troubleshooting steps. If the issue persists, contact customer support for further assistance.

Quick start guide

• Before using the device, we strongly recommend reviewing the User Manual on the website.

Specification

• The Hub 2 (4G) Jeweller (with 6V PSU) is an intelligent control panel and a key element of the Ajax security system.
• The device monitors the operation of all Ajax detectors and instantly sends an alarm signal to a central monitoring station and users.

1. LTE-FDD B2 does not support Rx diversity

Complete Set:

1. Hub 2 (4G) Jeweller (with 6V PSU);
2. SmartBracket mounting panel;
3. Power supply cable;
4. Ethernet cable;
5. Installation kit;
6. GSM card (depends on the sales region);
7. Quick start guide.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

FCC Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance between 20 cm of the radiator and your body; use only the supplied antenna. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Regulatory Compliance

This device contains a license-exempt transmitters)/receivers) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

To maintain compliance with IED’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body: use only the supplied antenna.

Warranty

• The warranty for Ajax devices is valid for two years after the purchase date. If the device does not work correctly, you should first contact the support service – in half of the cases, technical issues can be solved remotely.
• The full text of the warranty is available on the website: ajax. systems/warranty.
• User Agreement:ajax.systems/end-user-agreement.
• Technical support: [email protected].
• The manufacturing date is indicated on a sticker on the box.
• The importer’s name, location, and contact details are indicated on the package.

Designed by Ajax

• Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine www.ajax.systems
• ajax. systems/support/devices/hub-2-4g

Documents / Resources

| AJAX NA-FA Hub 2 4G Jeweller [pdf] User Guide
H24G6VAFA, 2AX5VH24G6VAFA, NA-FA Hub 2 4G Jeweller, NA-FA, Hub 2 4G Jeweller, 4G Jeweller, Jeweller
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>