AJAX Motion Protect Plus Jeweller Instruction Manual
- May 15, 2024
- ajax
Table of Contents
AJAX Motion Protect Plus Jeweller
Wireless indoor IR motion detector with additional K-band microwave sensor to filter thermal interferences
An Ajax hub is required for operation.
Find the detailed information on the device by the link:
http://ajax.systems/support/devices/motionprotect-plus/
Key Features
| Up to 12 m detection distance with 88.5° /80° viewing angles
---|---
| Temperature compensation
| False alarms prevention
algorithm
| Remote control and setup via the app
| Up to 5 years of operation on preinstalled battery
| Pet immunity
| Thermal interference filter with additional K-band microwave sensor
| Effortless installation and replacement
| Connecting via QR code
| Up to 1,700 m of two-way
encrypted wireless communication between hub or range extender and detector
False alarm prevention
MotionProtect Plus Jeweller combines special optics, additional K-band microwave sensor, and software to filter false alarms. When professionally installed, the detector ignores pets and doesn’t react to the most common sources of false alarms.
Optics
The detector lens increases sensitivity to human motion, cutting off false alarms to other sources of IR radiation. It is designed so that potential IR radiation from pets and other interferences affect only the small lens sections. Large sections, on the contrary, are aimed at the most likely places of burglar motion.
Hardware
Motion Protect Plus Jeweller features an additional K-band microwave sensor. When the device detects motion, it conducts an RF scan of the facility to eliminate false alarms due to thermal interference: air flows, heated by the sun curtains and blinds, fans, fireplaces, air conditioners, and other likely sources of false alarms.
Software
For additional protection against false alarms, the detector uses the Smart Detect algorithm. The armed detector constantly analyses the thermal diagram from the Pl R sensor: the intensity of IR radiation, the size of the thermal spots, the speed of movement and other parameters.
Installation
When properly installed and configured, the detector does not react to common sources of false alarms and animals under 50 cm tall and 20 kg in weight. For seamless installation, it has preinstalled batteries and the SmartBracket mounting panel. So, installers don’t need to disassemble the detector and won’t damage the electronics during installation.
Communication with
control panel| EN 50131 (Grade 2)
PD 6662:2017
UL369, ULC S306| Compatibility| Hubs
all Ajax hubs
Range extenders
all Ajax radio signal range
extenders
---|---|---|---
Communication with
control panel| Jeweller communication technology| Motion detection|
Sensitive element
1 x PIR sensor
1 x K-band microwave
sensor
Communication with
control panel| Frequency bands
866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
Depends on the region of sales
Maximum effective
radiated power {ERP)
< 20mW
Communication range up to 1,200 m In an open space
Polling interval
12-300 s Adjusted by PRO or user with admin rights in the Ajax app
Protection against forgery
Device authentication| Motion detection| Detection distance
up to 12 m
When installed at 2.4
meters height
Detection angles
horizontal – 88.5°
vertical – 80°
Motion detection speed
from 0.3 to 2.0 m/s
The direction of the detector lens should be perpendicular to an alleged
intrusion path into the facility.
Temperature
compensation
Sensitivity 3 levels Adjusted by PRO or user will admin rights in the
Ajax app
Pet immunity
weight: up to 20 kg
height: up to 50 cm
Smart Detect software algorithm filtering false alarms
Power supply| Battery
1 x CR123A, 3 V
(pre-installed)
Battery life
up to 5 years| Installation| Recommended installation
height
2.4 m
Operating temperature range
from -10°C to +40°C
Operating humidity
up to 75%
Casing| white, black
Dimensions
110 x 65 x 50 mm
Weight
96 g
Tampering alarm| Complete set| MotionProtect Plus
Jeweller 1 x CR123A (pre-installed) SmartBracket Installation kit Quick Start
Guide
