AJAX SYSTEMS HB2PLAFA Hub 2 Plus Jeweller User Manual

May 15, 2024
Ajax Systems

AJAX SYSTEMS HB2PLAFA Hub 2 Plus Jeweller

AJAX-SYSTEMS-HB2PLAFA-Hub-2-Plus-Jeweller

Specifications

  • Frequencies of Operation:
    • SRD Technology: 0.0003 mW/cm2 (limit 0.60 mW/cm2)
    • Wi-Fi: 0.1 mW/cm2 (limit 1.0 mW/cm2)
    • LTE: 0.05 mW/cm2 (limit 1.0 mW/cm2)
    • GSM: 0.1 mW/cm2 (limit 1.0 mW/cm2)
  • Communication Range: Up to 6500 ft (in open field)
  • Power Supply: Backup Battery
  • Communication Channels: 2 SIM cards (GSM 850/1,900 MHz GPRS), Ethernet, Wi-Fi
  • Operating Temperature Range: Not specified
  • Operating Humidity: Not specified
  • Weight: 12.95 oz
Specification Value
Operating Frequencies 905–926.5 MHz RF; varies depending on the region
RF Power Density Technology SRD: 0.0003 mW/cm2 (limit 0.60 mW/cm2)

Wi-Fi: 0.1 mW/cm2 (limit 1.0 mW/cm2)
LTE: 0.05 mW/cm2 (limit 1.0 mW/cm2)
GSM: 0.1 mW/cm2 (limit 1.0 mW/cm2)
Communication Range| Up to 6500 ft (in open field)
Power Supply| 110–240 V, 50/60Hz, 0.1 A
Backup Battery| 2 SIM cards (GSM 850/1,900 MHz GPRS), Ethernet, Wi-Fi
Operating Temperature Range| 14°F to 104°F
Operating Humidity| Up to 75%
Weight| 12.95 oz

Product Usage Instructions

Installation:

  1. Unbox the complete set including Hub 2 Plus Jeweller, SmartBracket mounting panel, power cable, Ethernet cable, installation kit, SIM card (availability varies by country), and quick start guide.
  2. Follow the installation instructions provided in the manual for proper setup.

Maintenance:
Ensure the device is placed within the specified communication range for optimal performance. Regularly check and replace backup batteries according to the manufacturer’s instructions.

Safety Precautions:

  • Do not replace the battery with an incompatible type to avoid explosion risk.
  • Dispose of used batteries following the provided instructions.

Important Safety Information

WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

To maintain compliance with the FCC’s RF exposure guidelines for an uncontrolled environment, the following measures should be taken:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help if needed.

Package Contents

  • Hub 2 Plus Jeweller
  • Mounting panel (SmartBracket)
  • Power cable
  • Ethernet cable
  • Installation kit
  • SIM card (available in certain countries only)
  • Quick start guide

Warranty and User Agreement
All warranty details and terms can be found on the official website:

Compliance with ISED Normatives
This device contains license-exempt transmitters/receivers that comply with the Innovation, Science and Economic Development Canada’s license-exempt RSS standards. The operation of this device is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation of the device.

Troubleshooting:

If experiencing interference or undesired operation, reposition the receiving antenna or seek assistance from customer support.

Contact Information

Manufacturer: AS Manufacturing LLC.
Address: 5 Sklyarenko street, Kyiv, 04073, Ukraine.
Website: www.ajax.systems

www.ajax.systems/pt/warranty
www.ajax.systems/pt/end-user-agreement
[email protected]
www.ajax.systems/pt

FAQ

Where can I find the warranty information?
Warranty details can be found at https://www.ajax.systems/es/warranty.

What should I do if the device is not functioning correctly?
If the device is not functioning as expected, refer to the end-user agreement at https://www.ajax.systems/es/end-user-agreement, or contact customer support for assistance.

How do I comply with FCC regulations?
To comply with FCC regulations, ensure to connect the equipment to a different circuit than indicated on the packaging. For more information, visit https://www.ajax.systems/pt.

What should I do if the device causes interference?
Follow the recommended measures such as reorienting the antenna, increasing distance between devices, or connecting to a different outlet. If these steps do not resolve the issue, consult an experienced technician. How do I dispose of the battery correctly?
Used batteries should be disposed of according to local regulations and the instructions provided with the device to prevent the risk of explosion. What is the range of communication for the Hub 2 Plus Jeweller?
The device can communicate up to 6500 ft in open field conditions.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Ajax Systems User Manuals

Related Manuals