GRIFFIN GP157 15W Wireless Fast Charging Pad User Manual
- June 6, 2024
- GRIFFIN
Table of Contents
GRIFFIN GP157 15W Wireless Fast Charging Pad
Includes
15W Wireless Fast Charging Pad, QC3.0 Mains Charger, and USB-C power cable
Specifications
Operation temperature:
10°C to 60°C
Total input power:
5V/3A, 9V/ 2.5A, 12V/2A
Total output power
Wireless charging: up to 15W Mains charging: up to 24W (5V/ 3A, 9V/ 2.5A, 12V
/ 2A)
Compatibility
Qi-enabled devices
Charging Status Indicator
LED color: Status:
- Charging
- Fully charged
- Blue
- Green
- Blue/Green blinking
- Abnormal operation / metal detected
Disclaimer
Charging times may vary for each device based off size and battery capacity.
Safety Instructions
- Do not drop the 15w Wireless Fast Charging Pad
- Do not modify, repair or take the 15W Wireless Fast Charging Pad apart
- Do not clean with water, alcohol or benzene
- Keep the 15W Wireless Fast Charging Pad away from humidity and dust
- Do not place metal objects on the 15W Wireless Fast Charging Pad
- Do not place foreign objects near or on the 15W Wireless Fast Charging Pad
- Keep the 15W Wireless Fast Charging Pad away from any liquids, moisture or creams
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
DISPOSAL
This symbol on the product or its packaging indicates that this product must not be disposed of as unsorted municipal waste and must be collected separately. Please dispose of the waste equipment at a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of the waste equipment at the time of disposal wil help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where the product can be dropped off, please contact vour local authority. or where you purchased your product.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These imits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices.Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.