AJAX Systems HP2J Security Control Panel User Guide

: May 15, 2024
: Ajax Systems

Table of Contents

AJAX Systems HP2J Security Control Panel
Specifications
Power Supply and Installation
Network Connection
Activation and Configuration
Alarm Monitoring
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AJAX Systems HP2J Security Control Panel

Specifications

Model: HP2Jxxxx(NA/AFA | NA/AUX | NA/VFA), Ajax Hub 2 Plus (9NA/AFA), Ajax Hub 2 Plus (9NA/ AUX)
Product Name: Security control panel
Frequency Range: 92 MHz FHSS
Radio Signal Range: Up to 6,500 ft (in an open space)
Power Supply: V~, / Hz, A
Backup Battery: 3.38 li-Ion Ah (up to hours of autonomous operation)
Operating Temperature Range: 14°F to 104°F
Operating Humidity: 75% to 95%
Dimensions: 152.9 oz

Quick Start Guide
Before using the device, we strongly recommend reviewing the User Manual on the website.

Model| Channel Canal Canal Canale Canal| Operation frequency Frequence de fonctionnement Frecuencia de operaci6n Frequenza operativa Frequencia de operai;:ao| Max RF output power

Puissance de sortie RF maximale Potencia de salida maxima de RF Massima potenza di uscita RF Potencia maxima de safda de RF

---|---|---|---
Hub 2 Plus| WCDMA| Bl| 24 dBm (+1/-3) dB
(9XX/AUX)| | TX (Uplink) (7 920-1980) MHz|
| | RX (Downlink) (2110-2170) MHz|
| | B2|
| | TX (Uplink) (7850-1910) MHz|
| | RX (Downlink) (7 930-1990) MHz|
| | B4:|
| | TX (Uplink): (1710-1755) MHz|
| | RX (Downlink) (2110-2155) MHz|
| | B5:|
| | TX (Uplink) (824-849) MHz|
| | RX (Downlink) (869-894) MHz|
| | B8|
| | TX (Uplink) (880-915) MHz|
| | RX (Downlink) (925-960) MHz|
| LTE-FDD| Bl| 23dBm+2dB
| | TX (Uplink) (7 920-1980) MHz|
| | RX (Downlink) (2710-2170)|
| | MHz|
| | B2:|
| | TX (Uplink): (7 850-1910) MHz|
| | RX (Downlink) (1930-1990)|
| | MHz|
| | B3|
| | TX (Uplink) (7710-1785) MHz|
| | RX (Downlink) (7 805-1880)|
| | MHz|
| | B4:|
| | TX (Uplink): (7710-1755) MHz|
| | RX (Downlink) (2710-2155)|
| | MHz|
| | B5:|
| | TX (Uplink): (824-849) MHz|
| | RX (Downlink) (869-894) MHz|
| | B7:|
| | TX (Uplink) (2500-2570) MHz|
| | RX (Downlink) (2620-2690)|
| | MHz|
| | B8:|
| | TX (Uplink) (880-915) MHz|
| | RX (Downlink) (925-960) MHz|
| | B28:|
| | TX(Uplink) (703-748) MHz|
| | RX (Downlink) (758-803) MHz|

I

(9XX/AFA)

| WCDMA| B2

TX (Uplink): (7 850-1910) MHz

RX (Downlink) (1930-1990) MHz

B4:

TX (Uplink) (7 710-1755) MHz

RX (Downlink) (2110-2155) MHz

B5

TX (Uplink) (824-849) MHz

RX (Downlink) (869-894) MHz

| 24 dBm (+1 /-3) dB
---|---|---|---
LTE-FDD| B2

TX (Uplink) (7 850-1910) MHz

RX (Downlink) (1930-1990) MHz

B4:

TX (Uplink) (1710-1755) MHz

RX (Downlink) (2110-2155) MHz

Bl 2:

TX (Uplink) (699-716) MHz

RX (Downlink) (729-746) MHz

| 23 dBm+ 2 dB
Hub 2 Plus

(9XX/VFA)

| LTE-FDD| B4

TX (Uplink) (1710-1755) MHz

RX (Downlink) (2110-2155) MHz

B13:

TX (Uplink) (777-787) MHz

RX (Downlink): (746-756) MHz

| 23 dBm+ 2 dB
| Wi-Fi| (2400-2483 5) MHz| 18.0 dBm@ 1 DSSS

14.5 dBm@ 54 OFDM

Hub 2 Plus Jeweller is an intelligent control panel for the Ajax security system with advanced communications capabilities and visual alarm verification support.

Frequency range	905-926.5 MHz FHSS (complies with part 15 of the FCC rules)

RF Power Density: SRO technology: Wi-Fi:

LTE:

GSM:

|

0 0003 mW/cm2 (limit 0.60 mW/cm2)

0.1 mW/cm2 (limit 1.0 mW/cm2)

0.05 mW/cm2 (limit 1.0 mW/cm2)

0.1 mW/cm2 (limit 1.0 mW/cm2)

Radio signal range| up to 6,500 ft (in an open space)
Power supply| 110-240 V~, 50/60Hz, 0.1 A
Backup battery| Ii-Ion 3 Ah (up to 38 hours of autonomous operation)
Communication channels| 2 SIM cards (GSM 850/1900 MHz

GPRS), Ethernet, Wi-Fi

Operating temperature range| from 14°Fto 104°F
Operating humidity| up to 75%
Dimensions| 6.42 X 6.42 X 1.42 “
Weight| 12.95 oz

Product Information
The Hub 2 Plus Jeweller is an intelligent control panel for the Ajax security system with advanced communications capabilities and visual alarm verification support. It operates on a frequency range of 92 MHz FHSS and has a radio signal range of up to 6,500 ft in an open space. The device is equipped with a backup battery for uninterrupted operation.

Power Supply and Installation

Connect the power supply cable to the Hub 2 Plus Jeweller and plug it into a suitable power source. Make sure the device is placed in a central location for optimal signal reception.

Network Connection

Connect the Hub 2 Plus Jeweller to your network using the Ethernet cable provided. Ensure a stable internet connection for proper functionality.

Activation and Configuration

Follow the instructions in the User Manual to activate and configure the Hub 2 Plus Jeweller. Set up any desired security settings and sensor connections.

Alarm Monitoring

Monitor the visual alarm verification support provided by the device. Respond promptly to any alerts or notifications received through the Ajax security system.

Complete set

Hub 2 Plus Jeweller
SmartBracket mounting panel
Power supply cable
Ethernet cable
Installation kit
SIM card (available in some countries)
Quick Start Guide.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20 cm between the radiator and your body: Use only the supplied antenna. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device contains a licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. To maintain compliance with IED’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body: use only the supplied antenna.
Warranty: The warranty for Ajax devices is valid for two years after the purchase date. If the device does not work correctly, you should first contact the support service in half of the cases, technical issues can be solved remotely. The full text of the warranty is available on the website: www.ajax.systems/warranty.
User Agreement: www.ajax.systems/end user agreement.

Technical support: support@ajax.systems
The manufacturing date is indicated on a sticker at the bottom of the box. The importer’s name, location, and contact details are indicated on the package. Manufacturer: AS Manufacturing LLC.
Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine. www.ajax.systems