AJAX HP2J Security Control Panel User Manual

: May 15, 2024
: ajax

Table of Contents

AJAX HP2J Security Control Panel
Product Usage Instructions
FEATURED
SPECIFICATION
Complete Set
FCC Regulatory Compliance
Frequently Asked Questions (FAQ)
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AJAX HP2J Security Control Panel

Specifications:

Model Name: Hub 2 Plus Jeweller
Product Name: Security Control Panel
Radio Signal Range: Up to 6,500 ft (in an open space)
Power Supply: Backup battery 3.38 Li-Ion Ah (up to hours of autonomous operation)
Communication Channels: GSM: 850/900/1800/1900 MHz
Operating Temperature Range: Not specified
Operating Humidity: Up to 75%
Dimensions: Not specified
Weight: 12.95 oz

Product Usage Instructions

Installation:
Follow the steps below to install the Hub 2 Plus Jeweller:

Mount the SmartBracket mounting panel securely on a wall.
Connect the power supply cable and Ethernet cable to the control panel.
If applicable, insert a SIM card into the designated slot.
Refer to the installation kit for further guidance.

Powering On:
To power on the device, connect it to a power source using the provided power supply cable. The backup battery ensures autonomous operation in case of power outages.

Communication Setup:
Ensure that the device is within range of a GSM network (850/900/1800/1900 MHz) for communication purposes.

Model name: HP2Jxxxx(NA/AFA | NA/AUX | NA/VFA),Ajax Hub 2 Plus (9NA/AFA), Ajax Hub 2 Plus (9NA/AUX)

Product name: Security control panel xXX – digits from 0 to 9 indicate the device modification.

Quick Start Guide
Before using the device, we strongly recommend reviewing the User Manual on the website.

ajax.systems/support/devices/hub-2-plus/

FEATURED

Model| Channel Canal Canal Canale Canal| Operation frequency Frequence de fonctionnement Frecuencia de operaci6n Frequenza operativa Frequencia de operai;:ao| Max RF output power

Puissance de sortie RF maximale Potencia de salida maxima de RF Massima potenza di uscita RF Potencia maxima de safda de RF

---|---|---|---
Hub 2 Plus| WCDMA| Bl| 24 dBm (+1/-3) dB
(9XX/AUX)| | TX (Uplink) (7 920-1980) MHz|
| | RX (Downlink) (2110-2170) MHz|
| | B2|
| | TX (Uplink) (7850-1910) MHz|
| | RX (Downlink) (7 930-1990) MHz|
| | B4:|
| | TX (Uplink): (1710-1755) MHz|
| | RX (Downlink) (2110-2155) MHz|
| | B5:|
| | TX (Uplink) (824-849) MHz|
| | RX (Downlink) (869-894) MHz|
| | B8|
| | TX (Uplink) (880-915) MHz|
| | RX (Downlink) (925-960) MHz|
| LTE-FDD| Bl| 23dBm+2dB
| | TX (Uplink) (7 920-1980) MHz|
| | RX (Downlink) (2710-2170)|
| | MHz|
| | B2:|
| | TX (Uplink): (7 850-1910) MHz|
| | RX (Downlink) (1930-1990)|
| | MHz|
| | B3|
| | TX (Uplink) (7710-1785) MHz|
| | RX (Downlink) (7 805-1880)|
| | MHz|
| | B4:|
| | TX (Uplink): (7710-1755) MHz|
| | RX (Downlink) (2710-2155)|
| | MHz|
| | B5:|
| | TX (Uplink): (824-849) MHz|
| | RX (Downlink) (869-894) MHz|
| | B7:|
| | TX (Uplink) (2500-2570) MHz|
| | RX (Downlink) (2620-2690)|
| | MHz|
| | B8:|
| | TX (Uplink) (880-915) MHz|
| | RX (Downlink) (925-960) MHz|
| | B28:|
| | TX(Uplink) (703-748) MHz|
| | RX (Downlink) (758-803) MHz|

I

(9XX/AFA)

| WCDMA| B2

TX (Uplink): (7 850-1910) MHz

RX (Downlink) (1930-1990) MHz

B4:

TX (Uplink) (7 710-1755) MHz

RX (Downlink) (2110-2155) MHz

B5

TX (Uplink) (824-849) MHz

RX (Downlink) (869-894) MHz

| 24 dBm (+1 /-3) dB
---|---|---|---
LTE-FDD| B2

TX (Uplink) (7 850-1910) MHz

RX (Downlink) (1930-1990) MHz

B4:

TX (Uplink) (1710-1755) MHz

RX (Downlink) (2110-2155) MHz

Bl 2:

TX (Uplink) (699-716) MHz

RX (Downlink) (729-746) MHz

| 23 dBm+ 2 dB
Hub 2 Plus

(9XX/VFA)

| LTE-FDD| B4

TX (Uplink) (1710-1755) MHz

RX (Downlink) (2110-2155) MHz

B13:

TX (Uplink) (777-787) MHz

RX (Downlink): (746-756) MHz

| 23 dBm+ 2 dB
| Wi-Fi| (2400-2483 5) MHz| 18.0 dBm@ 1 DSSS

14.5 dBm@ 54 OFDM

Hub 2 Plus Jeweller is an intelligent control panel for the Ajax security system with advanced communications capabilities and visual alarm verification support.

SPECIFICATION

Frequency range	905-926.5 MHz FHSS (complies with part 15 of the FCC rules)

RF Power Density: SRO technology: Wi-Fi:

LTE:

GSM:

| 0 0003 mW/cm2 (limit 0.60 mW/cm2)

0.1 mW/cm2 (limit 1.0 mW/cm2)

0.05 mW/cm2 (limit 1.0 mW/cm2)

0.1 mW/cm2 (limit 1.0 mW/cm2)

Complete Set

Hub 2 Plus Jeweller;
SmartBracket mounting panel;
Power supply cable;
Ethernet cable;
Installation kit;
SIM card (available in some countries);
Quick Start Guide.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

FCC Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20 cm the radiator and your body: Use only the supplied antenna.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.

This device contains a licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

To maintain compliance with ISED’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body: use only the supplied antenna.

Warranty: Warranty for Ajax devices is valid for two years after the purchase date. If the device does not work correctly, you should first contact the support service – in half of the cases, technical issues can be solved remotely.
The full text of the warranty is available on the website: www.ajax.systems/warranty.
User Agreement: www.ajax.systems/end-user-agreement.
Technical support: support@ajax.systems

The manufacturing date is indicated on a sticker at the bottom of the box. The importer’s name, location, and contact details are indicated on the package.
Manufacturer: “AS Manufacturing” LLC.
Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine.
www.ajax.systems