HOMEMATE HOM-12DJ12 Nutripot Multipurpose Pot Instruction Manual

HOMEMATE HOM-12DJ12 Nutripot Multipurpose Pot

Dear Customer

Thank you and congratulations for choosing HOMEMATE Nutri Pot. Please read this instruction manual carefully before using the product, as it contains important information that you may find helpful. Keep this instruction manual for future reference.

Important Safety Instruction

1. The appliance should only be connected to an earthed socket. Make sure that the supply voltage corresponds with the voltage marked on the rating label. Any connection error will nullify the guarantee.
2. Always unplug the appliance from the electrical outlet before cleaning, after use or in case of malfunction.
3. To prevent risks of electric shock or damage on the machine; do not immerse the motor head, cord or plug in the water or other liquid.
4. If you have to use an electrical extension lead; it must be earthed and make sure that no one can trip over it.
5. Do not move the appliance when it is functioning.
6. Do not use a damaged plug or cord. Contact an authorized service center for the replacement of the damaged part.
7. Do not let the cord to hang over the edge of the table or counter, nor touch hot surface.
8. Any work on the appliance other than the usual cleaning must be consulted and approved by an authorized service center.
9. Do not put any accessories containing metal in a microwave oven.
10. This appliance is for household use only and not for commercial applications.
11. Do not use outdoors.
12. Close supervision is necessary when the appliance is used by or near children. Supervision on a person with a physical or mental capabilities disability is required to prevent any misuse.
13. The use of any accessory or attachments not recommended by the appliance manufacturer may cause injuries.
14. The manufacturer will not accept any liability if the appliance is subjected to improper use or failure to comply with these instructions.

Before First Use

1. Check the main body and attachments thoroughly for any defects. If there is an instance that the appliance has been dropped, stop using it. Even invisible damage may cause adverse effects on the operational safety of the appliance. Consult an authorized service center for proper examination and repair.
2. Wash the blades and container by water. To avoid short-circuit or electric shock, never immerse the motor head into water or allow the control panel to have direct contact with water.
3. Use the brush included with the appliance to clean the blades. Please be careful when handling the blades to avoid injury.

Safety Precaution

The following information is intended to prevent damage to the unit or injury. Please read the following pages and use the appliance properly.

1. Do not let water into the coupler and socket. Please make sure it is dry before using.
2. Ensure to unplug the appliance before removing the motor head.
3. When the appliance has finished pulping, do not press the function button to pulp again. (To avoid over cooking, machine burn and spilled milk.)
4. Please use the machine to comply with the instruction manual and recipe, any failing use may cause the machine wrong working and mutation of the ingredients, for safety, it is recommended to use new ingredients to make milk again.
5. Place the head and the jug correctly before using.
6. Use the machine with the proper amount of water in the jug.
7. Clean the jug, blade, electrode and water temperature timely. The blade is sharp, and may cause injury if improperly handled.
8. Do not reset the program when it is on the later period or finished. It will cause over boiling or alarming.
9. The jug is hot when making soy milk. Please do not touch.
10. Take out the head before pouring soy milk.
11. The appliance is the high-speed electrical machine; it is normal that it has a fast and slow intermittence.
12. Do not place near a hot gas, electric burner or in a heated oven. Keep the appliance well grounded.
13. If the electricity goes off when the when the appliance is in process, let the machine to cool down first before restarting the program. Otherwise; it will cause the heating element to scorch or the machine to alarm.
14. If the water is cold. It will take more time to pulp.
15. When making some kinds of soymilk or fruit-vegetable drink, the low cover will be colored, which is normal and harmless to the health.
16. Choose the corresponding program according to the recipe to meet your taste .
17. To avoid unusual smell in the jug; wipe it dry and keep it ventilated after washing.

Components Parts

1. Vent Hole (1) : Discharge the humidity inside the jug.
2. Control Panel : Press the “Menu” button and chose the function you need, the relevant indicator will be lit, then press “Start” to begin.
3. Ventilation Hole (2) : Collects the steam inside the jug.
4. Head : Contains all electrical components.
5. Water Temperature Probe : Senses water temperature.
6. Blade : Made of high hardness stainless steel. Grinds food ingredients inside the jug.
7. Strong Electric Coupler : Transfers strong electricity to the head which controls the heating plate through a computer program. The appliance will turn-off automatically when you take out the head.
8. Power Socket : Plug one end of the included power cord into socket.
9. Container : Holds ingredients while making soymilk, soup or blending. Made of stainless steel.
   

Accessory Parts : Measuring cup (10), Power cord (11), Strainer (12), Clean Brush (13) and Jar (14)

Usage Instruction

1. Put the ingredients inside the container.
2. To lock the container and the main machine: place the main machine on top of the container then turn it clockwise until it locks in place
3. Select the right program for the intended use of the ingredients to get the best result.
4. To choose a program, press the MENU button until the program intended to use illuminates.
5. Observe the water level marks. Fill up the container between lowest and highest water level marks. (Too little or too much water will affect the taste and performance of the appliance.)
6. Unplug the appliance before preparing the drink. According to your taste; you may filter the soy milk with the colander or drink the finish product as it is.

Operations

Program: Soy milk (Dry/Soaked Bean)

1. Use the cup to get dry/wet beans. (Note: To prepare wet beans; soak dry beans in water for 6-8 hours.)
2. Put the beans inside the container then add water until reaches the space between the lowest and highest water level marks.
3. Place the main machine correctly in position with the container. All of the buttons will light up when you plug in the appliance. Press the MENU button until the DRY/WET BEAN function illuminates. When the light illuminates for the selected program. Press the START button to confirm and activate the machine.
4. The appliance will sound the alarm at a time later than 30 minutes. The button with the selected program will illuminate which means that the process is finished. Your soy milk is now ready to be served.

Note : 1 cup of soybean weighs 50 grams.

Program: Bean Paste

( Green bean, Red bean, Black bean etc. )

1. Use the cup to get green or red beans.
2. Put the beans inside the container then add water until reaches the space between the lowest and highest water level marks.
3. Place the main machine correctly in position with the container. All of the buttons will light up when you plug in the appliance. Press the MENU button until the BEAN PASTE function illuminates. When the light illuminates for the selected program. Press the START button to confirm and activate the machine.
4. The appliance will sound the alarm at a time later than 30 minutes. The button with the selected program will illuminate which means that the process is finished. Your bean paste is now ready to be served .

Program: Congee

Plain Function

1. Use the cup to get rice and other ingredients. If meat is included with your ingredients; cut it at least 555 mm in size.
2. Put the rice and other ingredients inside the container then add water until reaches the space between the lowest and highest water level marks.
3. Place the main machine correctly in position with the container. All of the buttons will light up when you plug in the appliance. Press the MENU button until the PLAIN/MIX function illuminates. When the light illuminates for the selected program. Press the START button to confirm and activate the machine.
4. The appliance will sound the alarm at a time later than 30 minutes. The button with the selected program will illuminate which means that the process is finished. This means the porridge is now cooked and ready to be served.

Mix Function

1. When the congee is finished, you may add other ingredients or condiments according to your taste (ex. Cooked Chicken or Pork, Salt, Pepper, Fish Sauce and Chilli).
2. Select the MIX function then press START.
3. The program button will illuminate after 5 minutes. This means the porridge is now well mixed with the additional ingredients and ready to be served.

Program: Multi Grains

1. Use the cup to get rice and other ingredients.
2. Put the rice and other ingredients inside the container then add water until reaches the space between the lowest and highest water level marks.
3. Place the main machine correctly in position with the container. All of the buttons will light up when you plug in the appliance. Press the MENU button until the MULTI GRAINS function illuminates. When the light illuminates for the selected program. Press the START button to confirm and activate the machine.
4. The appliance will sound the alarm at a time later than 30 minutes. The button with the selected program will illuminate which means that the process is finished. Your rice paste is now ready to be served.

Program: Soup (Thick/Clear)

1. Put the ingredients inside the container.
   Note : Cut the ingredients at least 252525 mm in size.

2. Add water until reaches the space between the lowest and highest water level marks.

3. Place the main machine correctly in position with the container. All of the buttons will light up when you plug in the appliance. Press the MENU button until the THICK/CLEAR function illuminates. When the light illuminates for the selected program. Press the START button to confirm and activate the machine.

4. The appliance will sound the alarm at a time later than 25 minutes if using the THICK function. After many times of heating and blending which means that the process is finished. Your soup is now ready to be served.
   Note : When making soup or stew the CLEAR function, the appliance will sound the alarm at a time later than 45 minutes, it will heat only without.

Program: Blend (No Heat)
This function can be used to blend or puree foods such as juices and sauces. Sample Recipe: HEALTHY YOUGURT DRINK

Ingredients:

• 700 ml Fresh Milk
• 500 ml Plain Yogurt (natural)
• 4 1/2 tbsp Honey
• 3 1/2 tbsp Lemon

1. Put the ingredients inside the container.
2. Place the main machine correctly in position with the container. All of the buttons will light up when you plug in the appliance. Press the MENU button until the BLEND function illuminates. When the light illuminates for the selected program. Press the START button to confirm and activate the machine.
3. The appliance will sound the alarm at a time later than 4 minutes. The button with the selected program will illuminate which means that the process is finished. Your healthy yogurt drink is now ready to be served.

Note : If you will make fruit or vegetable juice: Cut the ingredients (fruits or vegetables) at least 252525 mm in size. Then observe the amount of water you will put inside the jug (between the lowest and highest water level marks).

Program: Cleaning

1. Add water until reaches the space between the lowest and highest water level marks.
2. Place the main machine correctly in position with the container. All of the buttons will light up when you plug in the appliance. Press the MENU button until the NORMAL/HOT TEMP function illuminates. When the light illuminates for the selected program. Press the START button to confirm and activate the machine.
   • Normal Temp uses no heat when cleaning. The process takes 5 minutes to finish.
   • Hot Temp uses high temperature when cleaning. The process takes 10 minutes to finish.
3. The appliance will sound an alarm and will illuminate the function selected at a time the process is finished.

Special instruction of control panel

1. When the appliance power is on, all of the indicator will switch on. The user can select different function via function key, where the indicator will turn on and start to operate accordingly after selected. The function cannot be changed once specified. To prevent malfunction, do not press the function key during operation.
2. If a wrong function is selected, unplug the power before the first drive of the grinder. If the water temperature is not very high, resume the power and select the correct function for operation. If the water temperature is too high; it is necessary to wait for 3-5 minutes before re-plugging the power. You may now reset the correct function for operation.
3. After all the procedure, the appliance will emit a sound and light alarm. The appliance will alarm for one minute. You may unplug to stop the alarm. ( Note : When making juice, the taste of the drink may change if an incorrect function is chosen. Make sure to choose the correct function for operation according to the manual recommendation.)

Cleaning

Cleaning: Clean the appliance after using. Make sure to unplug the cord.

| Grinder

• Do not immerse the grinder into water or rinse the upper part of the grinder clean the ingredient dregs stuck on the lower part of the grinder.
• If necessary, make use of the included brush to clean it.
• To avoid short-circuit or other accidents, prevent water from sinking into the grinder via the control panel.

---|---
| Container

• Clean the container completely to avoid unpleasant smell. Do not immerse the container into water. It may cause malfunction or other hazards to the appliance if the internal parts are damped.

Storing : Place the appliance into a dry and airy place.
Note : Do not drink unfinished soymilk.

Troubleshooting

resuming the electricity.
There is a problem in the power connection.| Check whether power socket, power plug and power cord are damaged or not.
The power plug is not connected properly.| Reconnect the power plug tightly.
The grinder is placed improperly.| Place the main grinder steadily.
2. No operation, but the indication lights up.| There is no function selected.| Select proper function via function key.
There is no water or the water is insufficient in the container.| Add water to the container in between the upper and the lower levels.
There is an abnormal sound notice emitted during operation.| Finish operation under normal conditions.
The temperature sensor malfunctioned.| Contact Service Centre for checking and repairing.
3. Non-stop operation.| The water sank into the grinder.| Contact Service Centre for checking and repairing.
4. Non-stop heating.| There is no ingredient input.| Put ingredients inside the container.
Water sank into the grinder head.| Contact Service Centre for checking and repairing.
5. No response after pressing function key.| The appliance suddenly stopped and resume in operation.| Insufficient time to reset the system due to power failure. Turn off the appliance, restart the appliance after 3 minutes.
6. Unbroken pieces of ingredients .| The soaking time for ingredients is not enough.| Prolong the soaking time.
There is not enough or excessive ingredients input.| Increase or reduce the weight of ingredients according to the instruction manual.
There is an internal problem.| Contact Service Centre for checking and repairing.
7. The ingredients are not properly cooked.| Wrong function is selected.| Select proper function via function key.
There are unbreakable piece of ingredients.| Take reference to the suggested method of ”Troubleshooting” Unbroken pieces of ingredient.
The finished products is too dilute or too dense.| Place proper weight of ingredient.
There is not enough water input.| Fill water to the cup in between the upper and the lower water levels.
There is an internal problem.| Contact local Service Centre for checking and repairing.
8. Soymilk hasn’t been cook enough.| Too much water or other ingredients.| Add water between the water marks & ingredients as indicated by the manual.
9. Scorching the bottom of the container.| The container is not cleaned completely.| Clean the container completely.
There is excessive ingredients input.| Reduce the weight of ingredients.
10. Long operation time, but other conditions are normal.| The input water temperature is too low.| Use warm water instead.
11. Abnormal beep| The appliance is wearing.| That’s normal.

Note:

• If you can’t solve the problem by the methods above. Please bring it to your local after-sale department for repair.
• If the contents are not conformity with the machine, please take real products as criterion.

Disposal

Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points.

Technical Specifications

• Product HOMEMATE Nutri Pot
• Model HOM-12DJ12 (White)
• Heating Power 950W
• Motor Power 200W
• Frequency 50Hz
• Voltage 220V
• Capacity of Container 1300-1500ml.
• Dimension 245 x 205 x 345 mm.
• How to use Please read the instruction manual detail
• Imported by YONG CHANG ENTERPRISE (1991) CO., LTD.

Distributed by VERASU GROUP CO., LTD.
83/7 Wireless Rd., Lumpini, Patumwan, Bangkok 10330
Tel. +66 (0) 2838 8100
email: askverasu@verasu.com
www.verasu.com

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY! Please read the Instruction manual detail before use.
DO NOT IMMERSE IN ANY LIQUID

*** The company reserves the right to change contents in this manual without prior notice.
The company is not responsible for any spelling error by the printing house.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>