Arashi ASB 1501 Stand Blender User Manual
- June 15, 2024
- Arashi
Table of Contents
Arashi ASB 1501 Stand Blender
Specifications
| Type | ASB 1501 | ASB 1502 | ASB 1503 |
|---|---|---|---|
| Power | 350W–AC 220-240V / 50-60 Hz | ||
| Speed Selection | Pulse, 1 & 2 | ||
| Jar and Grind Cup Material | AS | ||
| Blade Material | Glass | ||
| Blade Material | Stainless Steel | ||
| Cable Length | 1.2 meter |
Blender Parts Description
The manual provides detailed diagrams of Arashi Stand Blender models ASB 1501, ASB 1502, and ASB 1503, each with labeled parts for identification and assembly. The parts include internal lid, lid, jar, jar blade, speed selector with pulse, 1 & 2 options, speed knob, measuring cup, and grinder cup with its blade.
Usage Instructions
- Make sure to assemble the JAR correctly to ensure proper functionality.
- Place the JAR (C) on top of the Motor and adjust until the JAR is in the correct position, then slightly twist the JAR against the direction of the clock hands until it locks.
- Cut the food ingredients into several parts to be blended and then add water without exceeding the 1L limit indicated.
- Attach the Lid (B) and the jar to start the blending process.
- Set the dial or button on the speed knob (F) to the desired speed (One, Two, or pulse).
- During blending, ingredients can be added through the opening in the lid.
- After finishing, turn the speed knob to the 0 setting to stop and release the JAR (C) by turning it in the direction of the clock hands.
Important Safety Information
- Do not press the speed knob on the unit with wet hands.
- Do not add liquids or other food ingredients while the unit is operating.
- Avoid touching the blades with hands during cleaning to prevent accidents/hazards.
- Before using the unit, check that your home’s voltage matches the unit’s voltage.
- Always turn off the unit before unplugging the power cable from the electrical outlet.
- Do not place the unit & plug in water or any other liquid.
- Turn off and unplug the unit from the power outlet when not in use or before cleaning.
- Keep out of reach of children.
- Do not operate the unit if any part is damaged.
- Take the unit to an authorized dealer or service center for repair.
Blender Usage Guidelines
- Do not fill the JAR with ingredients at temperatures above 60 °C.
- Avoid filling the JAR beyond the maximum level to prevent overflow.
- Always insert the internal lid (A) into the lid (B) before starting the process.
- Cut solid ingredients into small pieces before placing them in the JAR.
- Process hard ingredients in stages to facilitate blending.
- Do not insert hands or other objects into the blender while it is in use. Use the provided spatula to push down the ingredients after the device is turned off.
- Ensure that the blade is properly attached before starting the appliance.
Grinder Cup / Grinder Cup Usage
- When grinding, pause every 30 seconds.
- Make sure the rubber ring is properly installed before use.
- Do not use the grinder to process liquid-based raw materials.
- The grinder is not suitable for grinding very hard materials, such as nutmeg or rocks.
Approved Grinding & Chopping Materials
The table lists various materials that can be ground or chopped with the
quantities specified:
| Material | Quantity | Material | Quantity |
|---|---|---|---|
| Pepper | 25 – 75 gr | Coconut | 25 – 75 gr |
| Sesame Seeds | 25 – 75 gr | Coffee Beans | 25 – 75 gr |
| Rice, Wheat | 25 – 75 gr | Dry Bread | 1 piece of dry bread |
| Soybeans | 25 – 75 gr | Rock Sugar | 50 gr |
| Dry Peanuts | 25 – 75 gr | Peeled Beans | 25 – 75 gr |
Care and Maintenance Instructions
- Always unplug the unit from the power outlet and remove other components after use.
- Clean the JAR with water and cleaning fluid.
- Clean other parts of the unit with a soft, dry cloth.
- Avoid all kinds of wetness in the motor.
- Store the unit in a dry place after cleaning.
Service
- Do not operate the unit if it is no longer functioning or if any part is damaged.
- If the unit is damaged, do not disassemble it yourself; take it to an authorized dealer or service center for inspection, repair, or replacement.
Warranty Information
Improper use of the appliance can void the warranty, including improper usage, damage caused by electrical surges, breakage due to falls, water ingress into the blender motor, and tampering with the warranty seal.
FAQ
Can I use the blender for hot ingredients?
No, do not use the blender for ingredients above 60 °C to avoid damage.What should I do if the unit is damaged?
If any part of the unit is damaged, take it to an authorized dealer or service center for repair. Do not attempt to repair it yourself.How often should I pause when using the grinder cup?
Pause every 30 seconds to prevent overheating and potential damage to the grinder cup.Are there any ingredients I should not grind in the grinder cup?
Yes, avoid grinding very hard materials such as nutmeg or rocks as they can damage the grinder.How do I prevent the motor from getting wet?
Avoid any kind of wetness on the motor and always clean the blender parts with a soft, dry cloth.Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>