vtech baby Bopping and Cruising Baby Driver User Guide

: June 17, 2024
: vtech baby

Table of Contents

VTech Baby Bopping and Cruising Baby Driver
Product Usage Instructions:
INCLUDED IN THIS PACKAGE
GETTING STARTED
RECHARGEABLE BATTERIES
CARE & MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VTech Baby Bopping and Cruising Baby Driver

vtech baby-Bopping-and-Cruising-Baby-Driver-PRODUCT

Specifications

Product Name : Bopping & Cruising Baby DriverTM
Battery Requirement : 2 AA (AM-3/LR6) batteries
Recommended Battery Type : Alkaline or fully charged Ni-MH rechargeable batteries

Product Usage Instructions:

Getting Started

Ensure the unit is turned Off.
Locate the battery cover on the back of the unit and use a screwdriver to loosen the screw to open the cover.
Remove old batteries by pulling up on one end of each battery.
Install 2 new AA batteries following the diagram inside the battery box.
For optimal performance, use alkaline or fully charged Ni-MH rechargeable batteries.
Replace the battery cover and tighten the screw securely.

WARNING: Adult assembly is required for battery installation. Keep batteries out of reach of children.

Care & Maintenance

Keep the unit clean by wiping it with a slightly damp cloth.
Avoid direct sunlight and keep away from heat sources.
Remove batteries if the unit will not be used for an extended period.
Avoid dropping the unit on hard surfaces or exposing it to moisture.
The soft fabric steering wheel and pedals are surface washable only.
If the unit stops working, replace the batteries with a new set.

FAQ

Q: Where can I find the full version of the manual?
- A : The full version of the manual is available online through the provided links or by scanning the QR code in the printed manual.
Q: What type of batteries does this product require?
- A : The product requires 2 AA (AM-3/LR6) batteries. It is recommended to use alkaline or fully charged Ni-MH rechargeable batteries for best performance.
Q: How should I clean the unit?
- A : Wipe the unit with a slightly damp cloth to keep it clean. The soft fabric steering wheel and pedals are surface washable only.

INCLUDED IN THIS PACKAGE

Bopping & Cruising Baby DriverTM
Quick Start Guide

WARNING

All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE

Please keep this Quick Start Guide as it contains important information.

WARNING

With the Bopping & Cruising Baby DriverTM safety comes first. To ensure your child’s safety, adult assembly is required. Never use the Bopping & Cruising Baby DriverTM as a handle. Do not use in moving vehicles. Do not add additional strings or straps. Possible entanglement or strangulation injury when attached to cribs or playpens/play yards. Do not attach to cribs or playpens/play yards.

Unlock the packaging locks

vtech baby-Bopping-and-Cruising-Baby-Driver-FIG1

NOTE
For melodies and song lyrics, please scan the QR code or go to the website

GETTING STARTED

Battery Removal and Installation

vtech baby-Bopping-and-Cruising-Baby-Driver-FIG2

Make sure the unit is turned Off.
Find the battery cover located on the back of the unit, use a screwdriver to loosen the screw, and then open the battery cover.
Remove old batteries by pulling up on one end of each battery.
Install 2 new AA (AM-3/LR6) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MHrechargeable batteries are recommended.)
Replace the battery cover and tighten the screw to secure it.

WARNING

Adult assembly is required for battery installation. Keep batteries out of reach of children.

IMPORTANT: BATTERY INFORMATION

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES

Remove rechargeable batteries (if removable) from toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries if the unit will not be in use for an extended period of time.
Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
The soft fabric steering wheel and soft pedals are surface washable only.
If the unit stops working or malfunctions, install a new set of batteries.

IMPORTANT NOTE

If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or by going to our website vtechkids.com and filling out our Contact Us form located under the Customer Support link. Creating and developing VTech products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However,errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Supplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Trade Name : VTech®
Model : 5675
Product Name : Bopping & Cruising Baby DriverTM
Responsible Party : VTech Electronics North America, L.L.C.
Address: 1156 W. Shure Drive, Suite 200 Arlington Heights, IL 60004
Website: vtechkids.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THATMAY CAUSE UNDESIRED OPERATION.

We aim to reduce our environmental impact and have reduced the amount of paper used for our printed manuals. The full version of the manual is available online through the following link or by scanning the QR code.