FONESTAR STV-7364N Tilting TV Wall Mount Instruction Manual
- June 12, 2024
- Fonestar
Table of Contents
FONESTAR STV-7364N Tilting TV Wall Mount
Product Information
Product Name: STV-7364N Tilting TV Wall Mount
Maximum Weight Capacity: 50kg
IMPORTANT
- Follow the installation recommendations in the instruction manual.
- The installation surface must be completely flat. Make sure the holes in the wall coincide with the holes on the plate. Screw the mount to the wall, in vertical position only.
- The mount must be properly and firmly attached to the wall or installation surface to make sure that the support holds the maximum weight. FONESTAR does not hold itself responsible for damage or breakages due to the mount falling away from the wall because it was incorrectly attached, the wall was in bad conditions or it was handled incorrectly.
Included Components
- (x1) Plate B
- (x1) Plate A
- (x1) Plate C
- (x1) Plate D
- (x1) Plate E
- (x4) M5x14 Screws (M-A)
- (x4) M6x14 Screws (M-B)
- (x4) M6x30 Screws (M-C)
- (x4) M8x30 Screws (M-D)
- (x4) M8x50 Screws (M-E)
- (x4) ST6.3×55 Screws (W-A)
- (x4) 10×45 Screws (W-B)
Product Usage Instructions
- Read and follow the installation recommendations in the instruction manual.
- Ensure that the installation surface is completely flat and that the holes in the wall coincide with the holes on the plate.
- Screw the mount to the wall in a vertical position only.
- Properly and firmly attach the mount to the wall or installation surface to ensure the support.
- Follow steps 2a, 2b, and 3 as shown in the diagram for proper assembly.
- Follow step 4 as shown in the diagram to complete the assembly.
- Follow step 5 as shown in the diagram to securely attach the TV to the mount.
- For more information, visit www.fonestar.com
ASSEMBLY INSTRUCTIONS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>