Arashi Vision Inc Insta360 Flow Smartphone Gimbal-Standard User Guide

June 13, 2024
Arashi Vision Inc

Arashi Vision Inc Logo Iinsta360 Flow
QUICKSTART GUIDE

Insta360 Flow Smartphone Gimbal-Standard

Arashi Vision Inc Insta360 Flow Smartphone Gimbal-
Standard

Arashi Vision Inc Insta360 Flow Smartphone Gimbal-Standard -
Fig

https://www.insta360.com/flow/guideArashi Vision Inc Insta360 Flow
Smartphone Gimbal-Standard - Fig 1Arashi Vision Inc Insta360 Flow Smartphone Gimbal-
Standard - Fig 3Arashi Vision
Inc Insta360 Flow Smartphone Gimbal-Standard - Fig 4Arashi Vision Inc Insta360 Flow Smartphone Gimbal-
Standard - Fig 5Arashi Vision
Inc Insta360 Flow Smartphone Gimbal-Standard - Fig 6

Arashi Vision Inc.
ADD: 11th Floor, Building 2, Jinlitong Financial Center,
Bao’an District, Shenzhen, Guangdong, China
WEB: www.insta360.com
TEL: 400-833-4360 +1 800 6920 360
EMAIL: service@insta360.com
Insta360 GmbH
Gartenfelder Strake 29-37, Gebaude 31/31.12
1.0G, 13599, Berlin,Germany
+49 177 856 7813
cash.de@insta360.com

Arashi Vision Inc Insta360 Flow Smartphone Gimbal-Standard - Icon
2V1.0 PB.ABB0101

Safety Information

Warning

  1. The product should never come into contact with any kind of liquid. If the inside of the product comes into contact with water, chemial decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion.
  2. The product should be used in temperatures from -4°F to 104°F .
  3. Do not charge the battery immediately after use, because the battery temperature may be too high. Do not charge the battery until it cools down to near room temperature. Charging the battery outside of the temperature above 104°F may lead to battery expansion, leakage, overheating,or battery damage.
  4. If it is not used for a long time (e.g 3months ), the battery may be depleted. Please charge the product to turn it on.
  5. Do not leave the product near heat sources such as a furnace or heater. Do not leave the product inside of a vehicle on hot days.
  6. Do not drop or strike product. Do not place heavy objects on the product.
  7. Do not use any liquid cleansers. Only use a soft dry cloth to clean the product.

Note

  1. Insta360 Flow is not water resistant. Do not use it in the rain.
  2. Ensure no obstructions affecting the gimbal when Insta360 Flow is powered on.
  3. Intricate components inside Insta360 Flow may be damaged upon impact and cause the gimbal to be damaged.
  4. Keep Insta360 Flow away from sand and dust to safeguard the product.
  5. Ensure to align the marks on Insta360 Flow and the Magnetic Phone Clamp when attaching. Otherwise, the phone may fall off. The Magnetic Phone Clamp attach to Insta360 Flow through magnets. Do not move it too fast or make any sudden movements.
  6. Insta360 Flow contains magnets. Keep it away from pacemakers and other devices to avoice interference.
  7. After use, please shrink the extension rod collapse and store the product.

Specification

Name Insta360 Flow
Model CINSABBA
Energy 10.44w
Bluetooth Operation Frequency:Bluetoo th 2400~2483.5MHz Output Power

(E.I.R.P.) 10dbm Model:A0692
Battery| Capacity:2900 mAh Input: 5V⎓ 2A
Operating temperature| -20℃ – 40 ℃

Compliance Information

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC STATEMENT

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

  1. This device may not cause interference; and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.

Declaration of Conformity

Arashi Vision Inc.hereby, declares that this product is in compliance with the essential requirement and other relevant provisions of the directive 2014/53/EU .
A copy of the EU Declaration of Conformity is available online at http://www.insta360.com/cn/euro-compliance

GB Compliance Statement

Arashi Vision Inc.hereby, declares that this product is in compliance with the essential requirement and other relevant provisions of Radio Equipment Regulations 2017.
A copy of the GB Declaration of Conformity is available online at http://www.insta360.com/cn/euro-compliance

**** WEEE Directive

Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU/UK. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

Insta360 GmbH
Gartenfelder StraRe 29-37, Gebaude 31/31.12
1.0G, 13599, Berlin,Germany
+49 177 856 7813
cash.de@insta360.com

Arashi Vision Inc LogoArashi Vision Inc Insta360 Flow Smartphone
Gimbal-Standard - Icon 2 PB.ABB0201

Documents / Resources

| Arashi Vision Inc Insta360 Flow Smartphone Gimbal- Standard [pdf] User Guide
Insta360 Flow Smartphone Gimbal-Standard, Insta360, Flow Smartphone Gimbal- Standard, Smartphone Gimbal-Standard, Gimbal-Standard, Standard
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals