Goosky E2 UH-1Y Venom RTF Helicopter Instruction Manual
- September 15, 2024
- GOOSKY
Table of Contents
Goosky E2 UH-1Y Venom RTF Helicopter
INSTRUCTION MANUAL
Thank you for buying GOOSKY products. The E2 is the latest technology in radio control helicopters .Please read this manual carefully before assembling and flying the new E2 helicopter We recommend that you keep this manual for future reference and to assist with maintenance.
Thank you for buying GOOSKY products. The E2 Helicopter is designed as an easy to useful featured radio control helicopter capable of all forms of rotary flight. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the manual. Be sure to retain the manual for future reference, routine maintenance, and tuning.
The E2 is a new product developed by GOOSKY It features the best design available on the Micro-Heli market to date ,providing flying stability for beginners ,full aerobatic capability for advanced fliers, and unsurpassed reliability and customer support.
WARNING LABEL LEGEND
WARNING
Mishandling due to failure to follow these instructions may result in damage or injury.
CAUTION
Mishandling due to failure to follow these instructions may result in
danger.
FORBIDDEN
Do not attempt under any circumstances
IMPORTANT NOTES
I WH R/C helicopters, including the E2 are not toys. R/C helicopters
utilize various high-tech products and technologies to provide superior
performance .Improper use of this product can result in serious injury or even
death. Please read this manual carefully before using and make sure to be
conscious of your own personal safety, the safety of others, and your
environment when operating all GOOSKY products.
Manufacturer and seller assume no liability for the operation or the use of this product. Intended for use only by adults with experience flying remote control helicopters at a legal flying field. After the sale of this product we cannot maintain any control over its operation or usage.
We recommend that you obtain the assistance of an experienced pilot before attempting to fly our products for the first time.
A local expert is the best way to properly assemble, setup, and fly your model for the first time.E2 Helicopter requires a certain degree of skill to operate, and is a consumer item. Any damage or dissatisfaction as a result or accidents or modifications are not covered by any warranty and cannot be returned for repair or replacement. Please contact our distributors for free technical consultation and parts at discounted rates when you experience problems during operation.
SAFETY NOTES
CAUTION
Fly only in safe areas, away from other people .Do not operate R/C aircraft
within the vicinity of homes or crowds of people. R/C aircraft are prone to
accidents, failures, and crashes due to a variety of reasons including, lack
of maintenance, pilot error, and radio interference. Pilots are responsible
for their actions and damage or injury occurring during the operation ,or as
of a result of Flying R/C aircraft.
Precautions before use
FORBIDDEN FLY IN AN APPROPRIATE LOCATION
- R/C helicopters fly at high speed ,thus posing a certain degree of potential danger. Choose a legal flying fled consisting of flat, smooth ground without obstacles.
- Do not fly near buildings, high voltage cables ,or trees to ensure the safety of yourself, others and your model.
- For the first practice, please choose a legal flying field and use training skids to fly to reduce the damage. Do not fly your model in inclement weather such as rain .snow or darkness.
FORBIDDEN
PREVENT MOISTURE I NE
- R/C models are composed of many precision electrical components.
- It is cortical to keep the model and associated equipment away from moisture and other contaminants. The introduction or exposure to water or moisture in any form can cause the model to malfuntion resulting in loss of use,or a crash .Do not operate or expose to rain or moisture.
FORBIDDEN
PREVENT OPERATION
Please use only Goosky parts to ensure the safe operation of your helicopter.
WARNING
OBTAIN THE ASSISTANCE OF AN EXPERIENCED PILOT
- Before turning on your model and transmitter, check to make sure no one else is operating on the same frequency. Frequency interference can cause your model,or other models to crash.
- The guidance provided by an experienced pilot will be invaluable for the assembly, tuning, trimming, and actual first flight. (We recommend you practice with a computer-based flight simulator.)
WARNING
SAFE OPERATION
Operate this unit within your abity. Do not fly under impaired conditions and
improper operation may cause danger to yourself and others.
CAUTION
ALWAYS BE AWARE OF THE ROTATING BLADES
During the operation of the helicopter ,the main rotor and tail rotor will be
spinning at a high rate of speed .The blades are capable of inflicting serious
bodily injury and damage to the environment. Be conscious of your actions, and
careful to keep your face, eyes, hands, and loose clothing away from the
blades. Always fly the model a safe distance from yourself and others, as well
as surrounding objects. Never take your eyes off the model or leave it
unattended while it is turned on. Immediately turn off the model and
transmitter when you have landed the model.
CAUTION \
KEEP AWAY FROM HEAT
- R/C models are made of various forms of plastic is very susceptible to damage or deformation due to extreme heat and cold climate.
- Make sure not to store the model near any source of heat such as an oven ,or heater .It is best to store the model indoors in a climate-controlled room.
EQUIPMENT REQUIRED FOR ASSEMBLY
When you see the marks as below,please use alue or grease to ensure flying
safety.
Specifications
- Length: 483mm
- Height: 132mm
- Width: 115mm
- Main Rotor Diameter: 490mm
- Tail Rotor Diameter: 87mm
- Flying Weight: About 538g
Features
- Dual brushless motors driving the main and tail rotors directly
- Adjustment free linkage rods for servos, swash and head
- Full-metal CNC manufactured motorhead with 8 high precision bearings, provides stable and smooth flying experience
- Full-metal CNC manufactured swashplate guarantees accuracy and durability
- Pop-off canopy design, quick and easy battery replacement
- New rotor blade designs, offer optimum power and efficiency
- Parameter adjustment by Smart Phone APP Wireless programming. Upgradeable FBL rmware
- Non-reversible, quick release tail rotor High-end EPP carrying case with an integrated handle and
- locking mechanism, built to withstand impact and be easy to carry
- GTS System reprogrammed with new Higher Order Control Algorithms
step 1-
step 2
step 3
CAUTION
- Suggestion: use low strength metal thread sealant for M1.7×4
- The linkage ball must be positioned 7mm out on the servo arm.
- Pay attention to the direction of the swing arms of the three servos
CAUTION
It is recommended to use medium strength locking adhesive during the assembly
process for machine screws and align the screws with the flat spots on the
spindle. The screw must be locked in place.
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
CAUTION
Insert the carbon fiber tail boom into the root of the square groove of the
main frame, and then fix it with adhesive.
Step 10
Step 11
CAUTION
Assemble the decorative parts to the designated position and then fix them
with adhesive.
Step 12
Caution
Assemble decorative parts, air inlet, exhaust outlet, horizontal wing, tail
wing and other components to designated positions, and then fix them with
achocho I
Step 13
CAUTION
Assemble the air inlet, exhaust outlet, horizontal wing and other parts to
the designated position, and then fix them with adhesive.
Step 14
Step 15
Step 16
Step 17
Notice
- .A 1.5mm hex screwdriver is included in the box for assembling the main and tail blades.
- The main blades rotate counterclockwise. Make sure to assemble the blades according to the provided illustration and be careful not to assemble them incorrectly.
- Each main blade set is factory-calibrated and weighed. Do not mix blades from different sets, as this can cause the helicopter to fly unstably or vibrate abnormally, and you may lose control of the helicopter.
- When assembling the main blades, do not tighten the screws too much. The blades should be able to fold by hand with a slight damping feeling. Make sure the blades have the same tightness to avoid vibrations and instability that can lead to loss of control. Always double-check the helicopter before take-off and establish a regular maintenance routine.
Step 18
Step 19
Flight Parameter Setting Introduction
Introduction for flight control binding
CAUTION
- Turn on the GOOSKY T8 transmitter, press the BIND button for 3 times after the helicopter is powered on. The blue light flashes quickly. Keep the transmitter less than one meter away from the flight control. The flight control passes self-detection when the blue light is solid on. Then the binding is done.
- Turn on the Futaba transmitter, adjust the communication protocol to (S-FHSS). Long press and hold the BIND button when the aircraft is powered on, the blue light flashes quickly then. Keep the transmitter less than one meter away from the flight control. The flight control passes self-detection when the blue light is solid on. Then the binding is done.
Spare parts picture-1
Spare parts picture-2
Spare parts picture-3
Transmitter description-1
- (Product Model) T8
- (Size) RT K*H154
- (Radio Frequency) : 2.404GHz-2.4475 GHz
- (Transmit Power)’: < 20 dBm
- Weight) : 335g
- (Modulation Mode) 2FSK
- (Spread Spectrum Mode) : FHSS
- (Operating Voltage) =: 3.7V
- (Effective Distance). : 300m
- (Charging Port) : USB-C
- (Low Voltage Alarm: 3.35V
- (Battery Type) : Lithium Plyer Battery
- (Battery Capacity) : 18650 2800mAh 3.7V
- (Coach Interface): PPM4s W!
Guangdong Goosky Technology Innovation Co., Ltd.
C 2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>