Arashi Vision CINOSXXA Insta360 ONE X2 User Guide

**Arashi Vision CINOSXXA Insta360 ONE X2 User Guide

**

What’s Included

This package includes the following items. If any item is missing or broken, please contact Insta360.

• Insta360 ONE X2

• Protective Pouch

• Battery

• Charge Cable

• Lens Cloth & Documentation

Names of Parts

1. Lens
2. Microphone
3. Status Indicator
4. USB Lock Cover (removable)
5. USB Lock Buckle
6. USB Type C Port
7. Battery Lock Buckles
8. Standard 1/4” Mounting Point
9. Touch Screen
10. Speaker
11. Power / Function Button
12. Shutter Button

Before You Start

1. Ensure the battery has been fully charged. Please connect the included charge cable to ONE X2 in case of low or depleted battery.

Note:
You can also use the official Insta360 ONE X2 Smart Charger (sold separately).

2. Insert a Micro SD card
   a. First, remove the battery. Squeeze the battery lock buckles as the two small arrows indicate, then the battery will pop out automatically.

b. Insert a Micro SD card
(With its label facing outward towards the touch screen)
Supported Micro SD cards:
Please use ex FAT Format Micro SD cards of speed classes UHS-I and V30 to ensure normal recording. The maximum supported storage space is 1TB.

3. Be sure to close the battery lock cover and USB lock cover completely (The yellow indication marks should be covered) to ensure waterproofing is not affected.

   ---

Know Your Insta360 ONE X2

Power on / off

When the camera is turned off, press the Power / Function button to power it on.
In standby mode, press the Power / Function button to turn the touch screen light off / on. In standby mode, long press the Power / Function button for 2 seconds to power it off.

Using the Touch Screen

Important: When using ONE X2 in water, please lock the touch screen to avoid accidental presses. After locking the touch screen, you can use the Power / Function Button to change modes.

Basic operations for the touch screen:

Control via Wi-Fi

1. Download the Insta360 app. The first time you use it, please follow
   onscreen instructions to activate the app.

2. Turn on the Wi-Fi and Bluetooth of your mobile device.

3. When the camera is turned off, press the Power / Function button to power it on.

4. After installing the app, tap the camera icon at the bottom of the app homepage and select “Connect now” in the Wi-Fi panel. Then, follow the onscreen instructions to connect your device.

5. After successfully connecting the camera, you can take photos or shoot videos via the app.

Note:
The WiFi connection range is 10 meters (33 ft) in optimal conditions with no interference.

For more product information, visit
https://www.insta360.com/support/product-support

Disclaimer

Please read this Disclaimer carefully. Using the camera and its relevant accessories means that you acknowledge and accept the terms of this disclaimer.

By using this camera, you hereby acknowledge and agree that you are solely responsible for your own conduct when using this camera and any consequences thereof. You agree to use this camera only for proper and lawful purposes. You understand and agree that Arashi Vision Inc. (hereinafter referred to as ‘Insta360’) accepts no liability for any and all misuse, consequences, damages, injuries, penalties,
or any other legal responsibility directly or indirectly incurred by your using this camera and associated accessories. Before every use, make sure that your accessories are functioning properly. If there’s any damage or irregularity, stop using them
immediately.

Within the scope of state laws and regulations, Insta360 reserves the right of final explanation and revision for the commitment.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two.

conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC STATEMENT

This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The distance between user and device should be no less than 20cm.

Arashi Vision Inc.
ADD: 6F, Building A, Logan Century Center, 23 Haixiu Road, Bao’an
District, Shenzhen, Guangdong, China
WEB: www.insta360.com
TEL: 400-833-4360 +1 800 6920 360
EMAIL: [email protected].

References

• Insta360 | Action Cameras | 360 Cameras | VR Cameras
• Insta360 | Action Cameras | 360 Cameras | VR Cameras

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>