PETKIT EVERSWEET Solo 2 Wireless Pump User Manual

USER MANUAL

PETKIT EVERSWEET SOLO 2 WIRELESS PUMP

Please read the User Manual carefully before using the product and keep it properly.

01 PRODUCT DESCRIPTION

1. USB Plug
2. Drinking Tray
3. Filter
4. Filter Tray
5. Outlet Pipe
6. 3rd Wireless Water Pump
7. Main Body
8. Main Body Base
9. Indicator Light

Note: In order to provide a better user experience, we will be implementing periodic product enhancements. Product images shown for illustration purpose only.
Actual product may vary from the image shown on the box. For any discrepancies, please refer to the actual product.

02 INSTALL AND USE

Scan QR code for an instructional video on how to install your device

Scan QR code and download the PETKIT App for further assistance

03 CLEANING AND MAINTENANCE

Scan QR code for an instructional video on how to clean and maintain your device

04 INDICATOR LIGHT

1. SMART MODE
   Green light on: Interrupted welling up of water.
   (Specific parameters can be set up in the App by yourself. The default setting is water flowing for 3 minutes and stopping for 3 minutes.)

2. NORMAL MODE
   Blue light on: Uninterrupted welling up of water.

3. FILTER INDICATOR LIGHT
   Flashing green light:  The filter needs to be replaced. (After replacing the filter element, please complete the reset in the App.)

4. WATER SHORTAGE INDICATOR
   Flashing blue light: indicates water shortage and the device is in standby. The device can resume normal operation after refilling.

5. DEVICE POWER FAILURE
   Alternate flashing of blue and green light: indicates power failure. Please plug the USB power cord to restart the device, or contact customer services.

05 BASIC SPECIFICATIONS

06 A MESSAGE TO OUR VALUED CUSTOMERS

• Thank you for choosing PETKIT EVERSWEET SOLO 2 (WIRELESS PUMP). We at PETKIT have done our best to make life easier for you and your pets with technology.
• Please carefully read the User Manual before using the product. By setting up and using this product, you are acknowledged that you already read and accepted the safety guidelines listed below.
• We are not liable and will not accept responsibility for any accidents or injuries that result from improper use of this product.
• PETKIT reserves the rights of interpretation and revision.

07 USER SAFETY GUIDE

* Failure to follow the safety guides outlined below can result in product malfunction or other unforeseen mishaps.

• Please install and use the product as instructed in the User Manual.
• For pets older than 3 months only.
• For indoor use only.
• This device is using low voltages. However, pets can still damage the power cord if they chew on it. Please keep your pets away from the cord.
• Place on a level surface, do not overturn the device. Otherwise, it may cause a malfunction or water leakage.
• Do not immerse or soak the main body base in water.
• Clean well before using.
• If the device is not used for a long period of time or is moved, please unplug the power cord.
• Children should only be allowed to operate this device under the supervision of an adult.
• Repairs should only be done under the guidance of a professional to avoid safety hazards.
• Please check the remaining water in the drinking fountain before taking your vacation.
• If you encounter any issues using product, please contact customer support as soon as possible.

Manufacturer: Dongguan Zhihang Plastic Technology Co.,Ltd.
Address: Building 10, Pushikegu, Pushi 1st Road, Gangtou Village,
Qiaotou Town, Dongguan City, Guangdong Province, P.R.C.

Disposal

The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment(WEEE), requires that old household electrical appliances must not be disposed in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation,that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and ；(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>