StarTech PEXUSB3S23 SATA Power USB Card Instruction Manual

StarTech PEXUSB3S23 SATA Power USB Card

2 Port PCI Express USB 3.0 Card with SATA Power

PEXUSB3S23

*actual product may vary from photos

For the most up-to-date information, please visit: www.startech.com

Manual Revision: 06/12/2014

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may refer to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgment elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Introduction

The PEXUSB3S23 2-Port PCI Express USB 3.0 Card lets you add two USB 3.0 ports to any PCI Express-enabled computer system. Compliant with USB 3.0 standards for data transfer speeds up to 5 Gbps total (2.5 Gbps per port), while still being backward compatible with existing USB 2.0 / 1.1 devices.

Packaging Contents

• 1 x PCI Express USB 3.0 card
• 1 x Low Profile Bracket
• 1 x Driver CD
• 1 x Instruction Manual

System Requirements

• PCI Express enabled computer system with available PCI Express slot, and an available 15 pin SATA power connector
• Windows® 8 (32/64), 7 (32/64), Vista (32/64), XP (32/64), Windows Server® 2012, 2008 R2, 2003 (32/64), Linux 3.5

Product Overview

Installation

WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your PCI Express card. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. Also, be careful to handle the PCI Express card by its edges and not the gold connectors.

Hardware Installation

1. Turn your computer off and any peripherals connected to the computer (i.e. Printers, external hard drives, etc.). Unplug the power cable from the rear of the power supply on the back of the computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. See the documentation for your computer system for details.
3. Locate an open PCI Express slot and remove the metal cover plate on the rear of the computer case (Refer to the documentation for your computer system for details.). Note that this card will work in PCI Express slots of additional lanes (i.e. x4, x8 or x16 slots).
4. Insert the card into the open PCI Express slot and fasten the bracket to the rear of the case.
   • NOTE: If installing the card into a small form factor/low profile system, replacing the pre-installed full profile bracket with the included low profile installation bracket may be necessary.
5. Connect a 15-pin SATA power connector from the computer’s power supply to the SATA power connector on the card.
6. Place the cover back onto the computer case.
7. Insert the power cable into the socket on the power supply and reconnect all other connectors removed in Step 1.

Driver Installation

Windows XP/Server 2003/Vista/7/8

1. Once the computer has started and the operating system is fully loaded, insert the provided Driver CD into the computer’s CD/DVD drive.

2. Autorun should give you the option to browse the files on the CD or automatically open the CD.
   If Autorun does not start, Go into “My Computer” and access the CD/DVD drive that the CD is in.

3. Run the “setup.exe” file located in the “Etron\EJ168” folder and follow the on-screen instructions to complete the driver installation

Verifying Installation

Windows XP/Server 2003/Vista/7/8

From the main desktop, right-click on “My Computer” (“Computer” in Vista/7/8), then select Manage. In the new Computer Management window, select Device Manager from the left window panel.

In the Device Manager, under the Universal Serial Bus Controllers category, you should see the new entries for the USB 3.0 controller card.

Specifications

Connectors

| 1 x PCI Express x1 Male

1 x SATA Power (15 pin) Plug

2 x USB 3.0 A (9 pin; SuperSpeed) Female

Card Type| Standard Profile (LP bracket incl.)
Operating Temperature| 0°C to 60°C (32°F to 140°F)
Storage Temperature| 0°C to 80°C (32°F to 176°F)
Humidity| 10~90% RH, Non-condensing
Dimensions| 80 x 21 x 120 mm
Weight| 60 g
Compatible Operating Systems| Windows® 8 (32/64), 7 (32/64), Vista (32/64), XP (32/64), Windows Server® 2012, 2008 R2, 2003 (32/64), Linux 3.5

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to providing industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom, and Taiwan servicing a worldwide market.

FREQUENTLY ASKED QUESTIONS

What is the StarTech PEXUSB3S23 SATA Power USB Card?

The StarTech PEXUSB3S23 is a 2-Port PCI Express USB 3.0 Card with SATA Power. It allows you to add two USB 3.0 ports to a PCI Express-enabled computer system.

How do I install the StarTech PEXUSB3S23 SATA Power USB Card?

The installation process involves opening your computer case, inserting the card into an available PCI Express slot, connecting the SATA power connector, and installing drivers if needed. Detailed installation instructions are provided in the manual.

How can I verify the installation of the card on Windows?

On Windows XP/Server 2003/Vista/7/8, you can verify the installation by right- clicking on My Computer (or Computer in Vista/7/8), selecting Manage, and then checking the Device Manager under the Universal Serial Bus Controllers category for the USB 3.0 controller card.

Is there a warranty for this product?

Yes, the product is backed by a two-year warranty. StarTech.com also warrants its products against defects in materials and workmanship for specified periods.

What should I do if I encounter problems with the product?

If you encounter any issues or have questions, you can contact StarTech.com's technical support or refer to the resources available on their website.

Does StarTech.com offer a wide range of connectivity products?

Yes, StarTech.com is known for providing a wide range of connectivity and technology parts to meet various needs. They have been in operation since 1985 and offer a broad selection of products to bridge old and new technology.

Is StarTech.com ISO 9001 Registered?

Yes, StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts, and they have operations in multiple countries.

Can I use this card with a Mac computer?

This card is primarily designed for Windows and Linux operating systems. It may not be compatible with Mac computers as it does not list macOS as a supported operating system.

Can I use this card with a laptop?

This card is designed for desktop computers with available PCI Express slots. It is not intended for use with laptops or portable devices.

What are the benefits of USB 3.0 over USB 2.0?

USB 3.0 offers significantly faster data transfer speeds (up to 5 Gbps) compared to USB 2.0 (480 Mbps). This means faster file transfers and improved performance for USB 3.0 devices.

Can I use this card to charge USB devices?

Yes, you can use the USB 3.0 ports on this card to charge USB devices, but it's important to note that the card does not provide dedicated charging functionality like some USB hubs.

Do I need to install drivers for this card to work on Windows?

Yes, for Windows XP/Server 2003/Vista/7/8, you will need to install the drivers from the provided Driver CD or the manufacturer's website to ensure proper functionality of the card.

REFERENCE:StarTech PEXUSB3S23 SATA Power USB Card Instruction Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>