Streetz TWS-117 True Wireless Stereo In Ear Headphones Instruction Manual

Streetz TWS-117 True Wireless Stereo In Ear Headphones

PRODUCT OVERVIEW

1. Status LED
2. Charge port
3. Touch buttons
4. Status LEDs (on the earphones)

Ear caps
3 sizes of ear caps are included, small, medium, and large. Try them out to find the best fit for vou.

Connection
When you open the charging case the earphones will automatically pair lo each other. They will flash red, then change to blue flashing light lo indicate successful pairing. If they are flashing red and blue alternatively, it means the pairing failed. To solve the failure, double click on the right earphone to re-pair them. To connect to your phone/device, open your Bluetooth settings and find the earphones on the
list. The earphones will automaticallv reconnect to the last used phone/Bluetooth device.

Reset
If the earphones cannot connect to each other or the earphones cannot play music, or to do other general troubleshooting, you can reset. We also recommend forgetting the earphones from your device. Put both earphones to the charge case and close it. Wait just a moment, then open the charge case. The earphones will flash red, then change to blue flashing light to indicate successful pairing. To connect to your phone/device, open your Bluetooth settings and find the earphones on the list.

Functions

• Play/pause: single click (left or right earphone)
• Reject phone call: press and hold for about 2 seconds (left or right earphone)
• Answer/hang up : double click (left or right earphone)
• Previous song: double click (left earphone)
• Next song : double click (right earphone)
• Voice assistant : press and hold for about 2 seconds (left or right earphone)
• Volume upidown : triple click (left increases and right decreases)

Charge
Place the earphones in the charge case and close the cover to charge them. The LED on the charge case changes to green to confirm. Connect the charge case with a USB cable to charge it. The LED will flash while to confirm that it is charging. When the charge case is fully charged, it will change to static while.

Troubleshooting

1. If the so1_,nd quality is not good, please try to change to another earplug size.
2. Some places have strong electromagnetic interference, for example subways and airports. The Bluetoolh signal will be randomly interrupted, and you may experience delays on music playback. In these places there are many 2.4 GHz devices, which interfere with each other.
3. Some devices might have low Bluetooth version, such as TV:s. This might cause video and sound to be out of synchronization.
4. If you have the following problems: left and right earphones are not paired, or the earphones cannot connect to the Bluetooth device, or the left or right earphones are silent. Try doing a reset.

Safety instructions

1. Handle the earphones carefully. They contain highly sensilL e electronic components and batteries. All the following may cause damage lo the batteries or injury to a human: if they are dropped, burned, punctured, disassembled or exposed to high temperatures or liquids.
2. Do not use the earphones if they are damaged.
3. Do not use the earphones near water sources.
4. When you clean the earphones, use a dry cloth.
5. Repair service should only be made by professionals.
6. The product contains built-in rechargeable batteries. Warning: do not disassemble, strike, squeeze or put it into fire; Do not expose to high temperature; Do not use the battery if it has been immersed in water.

Disposal of electric and electronic devices EC Directive 2012/19/EU This product is not to be treated as regular household waste but must be returned to a collection point for recyding electnc and electronic devices. Further information is available from your municipality, your municipality’s waste disposal services, or the retailer where you purchased your product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>