SOG-II Type F Floor Version Kit for all Thetford C250 or C260 Instruction Manual

June 9, 2024
SOG

SOG-II Type F Floor Version Kit for all Thetford C250 or C260

SOG-II-Type-F-Floor-Version-Kit-for-all-
Thetford-C250-or-C260-PRODUCT

Product Information

The product uses technology instead of chemicals for its operation. It has a cassette and a cover connection which are used for disposing of waste. The product comes in door, floor, and roof versions. The door version has a filter that needs to be changed once a year. The floor version also has a filter that needs to be changed once a year, and it requires the fan to be pulled out of the rubber sleeve in the filter housing before changing the filter. The roof version is maintenance-free.

Product Usage Instructions

Follow these instructions to use the product:SOG-II-Type-F-Floor-Version-
Kit-for-all-Thetford-C250-or-C260-FIG 1

  1. Before removing the cassette, pull the hose forwards out of the cover connection.
  2. Insert the black plug in the cover connection.
  3. Insert the new cassette, plug (black) off forwards, and attach the extractor hose onto the cover connection.
  4. If you want to change a second cassette, carry the full cassette in the storage space for several days. There is no longer any gas formation if the cassette is full.

For the door version, change the filter once a year by following these steps:SOG-II-Type-F-Floor-Version-Kit-for-all-Thetford-C250-or-C260-FIG
2

  1. Completely unscrew the 2 crosshead screws at the bottom.
  2. Push the cover cap up a little and remove it at the front.
  3. Take out the filter and insert a new filter into the existing fitting.
  4. Place the cover on the top – pull it forwards slightly at the bottom. Push the cover from top to bottom so that it locks into place. Screw in screws and tighten slightly. Apply light pressure on the cover while doing so.

For the floor version, change the filter once a year by following these steps:

  1. Before changing the filter, pull the fan out of the rubber sleeve in the filter housing.
  2. Since the filter cartridge push-fits into the pipe, twist it back and forth while pulling it upwards and out.
  3. Insert the new filter cartridge into the pipe.
  4. Moisten the rubber sleeve before inserting the fan into the filter cartridge.
  5. Insert the fan as far as it goes, twisting it back and forth.

The roof version is maintenance-free.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals