GlocalMe Triforce 4G LTE Mobile Hotspot User Guide

June 14, 2024
GlocalMe

GlocalMe Triforce 4G LTE Mobile Hotspot

GlocalMe-Triforce-4G-LTE-Mobile-Hotspot-PRODUCT

Product Information

  • Specifications
    • Model: GLMU20A01
    • Capacity: 7000mAh/26.6Wh/3.8V Lithium-polymer Battery
    • Input: 5V 2.0A(MAX)
    • Output: 5V 2.0A(MAX)
    • Dimensions: 80x158mm
    • Weight: 105g
    • Supported SIM Card: Nano SIM
    • Supported Wi-Fi: GlocalMe_xxxxxx

Product Usage Instructions

  • Charging
    • Connect the charging cable to the Type-C port on the device.
    • Plug the other end of the cable into a power source with an output of 5V 2.0A (MAX).
    • The device will start charging and the battery indicator will show the charging progress.
    • Once fully charged, disconnect the charging cable from the device.
  • Using a Physical SIM Card
    • The TriForce device is defaulted to run on Cloud SIM services, but it also supports the use of local SIM cards.
    • Open the device settings.
    • Select “SIM card selection”.
    • Choose “SIM 1”.
    • Apply the changes or use the “Smart selection” option.
  • Indicator Lights
    • The TriForce device has indicator lights that provide information about its status.
    • Signal strength: Indicates the strength of the Wi-Fi signal.
  • Wi-Fi Indicator:
    • On: Wi-Fi is available.
    • Blinking: Wi-Fi is connecting.
    • Off: Wi-Fi is not available.
  • FAQ
    • How do I change the SIM card?
    • To change the SIM card, follow these steps:
    • Open the device settings.
    • Select “SIM card selection”.
    • Choose the desired SIM card option.
    • Apply the changes.
    • Where can I find more information about the product?
    • You can download the complete guide on the official GlocalMe website at glocalme.com/manuals.
    • How can I contact customer support?
  • You can contact Hong Kong uCloudlink Network Technology Limited through the following channels:
    • Email: service@ucloudlink.com.
    • Live chat: GlocalMe website / GlocalMe mobile app
    • Hotline: +852 8191 2660
    • Social media: Facebook, Instagram, Twitter, Youtube (search for GlocalMe)
    • Address: Suite 603, 6/F, Laws Commercial Plaza, 788 Cheung Sha Wan Road, Kowloon, Hong Kong

How To Use

【How To Use GlocalMe Cloud SIM Service?】 (Highly Recommended)

  1. Download GlocalMe App
    • Download and install the GlocalMe app on your mobile phoneGlocalMe-Triforce-4G-LTE-Mobile-Hotspot-FIG-1 \(1\)

Create a GlocalMe Account (In-App)

  • Click【Login】-【Register】
  • Follow the steps to register an account (You can register by email or mobile phone number

Activate TriForce

  • GlocalMe App–【My Device】–【Activate Device 】
  • Scan the device QR-code on the back of TriForceGlocalMe-Triforce-4G-LTE-Mobile-Hotspot-FIG-1 \(3\)

Turn on TriForce

  • Press and hold the power button for 3 seconds
  • When the light of 【 】 stays on, it means a successful connection

Connect the Wi-Fi

  • Find the Wi-Fi name and password at the back of TriForce
  • Connect your mobile device to the Wi-Fi setting

Power bank

  • Insert the charging head directly into the mobile device, and press the power button once to activate the dischargeGlocalMe-Triforce-4G-LTE-Mobile-Hotspot-FIG-1 \(7\)

【How To Use A Physical SIM Card?】
(TriForce is default to run on Cloud SIM services, but it also supports the use of local SIM cards)

  1. Insert A SIM Card
    • Please turn off your device when inserting/removing the SIM card
    • Open the SIM card tray with a pin and insert the SIM card as shown in the picture below. TriForce device only supports Nano-SIM cards
  2. Unlock the SIM Card (If PIN protected)
    • If the SIM card is in PIN protected, please pair your mobile device to the GlocalMe Wi-Fi network and visit 192.168.43.1 in your browser. username: admin, password: admin.
    • Please follow the steps to input the PIN code to unlock the SIMGlocalMe-Triforce-4G-LTE-Mobile-Hotspot-FIG-1 \(9\)
  3. Set The APN Manually
    • If you still cannot connect to the network after the above steps, you must add the APN manually and visit 192.168.43.1 in the browser.
    • 【Settings】–【SIM card management】–【APN settings】–
    • 【Add manually】enter the APN of your SIM card operator and click save

CONTACT

EC REP

  • Ocean Trading GmbH
  • Anhalter Str.10, 10963, Berlin, Germany
  • Tel/Mobile: 0049-30/25758899
  • ear@oceantrading.de.

UK REP

  • UKRP: OCEAN SUPPORT LTD
  • Amber, Office 119, Luminous House 300
  • South Row, Milton Keynes, MK9 2FR
  • Tel/Mobile: +447539916864
  • E-mail:Info@topouxun.com.

For the declaration of conformity, visit the website https://m.media- amazon.com/images/S/aplus-media/sc/8a45ee1d-3c3d-47f4-b9cd-a0de16c1a70f.pdf. For more information, please download the complete guide on glocalme.com/manuals. This manual is for reference only, the actual product shall prevail. The information is subject to change without notice.

  • Hong Kong uCloudlink Network Technology Limited
  • E-mail: service@ucloudlink.com.
  • Live chat: GlocalMe website / GlocalMe mobile app
  • Hotline: +852 8191 2660
  • Facebook: GlocalMe
  • Instagram: @GlocalMeMoments
  • Twitter: @GlocalMeMoments
  • Youtube: GlocalMe
  • Address: Suit 603, 6/F, Laws Commercial Plaza
  • 788 Cheung Sha Wan Road, Kowloon, Hong Kong

SIM Card Selection

  • Connect your mobile phone/laptop to GlocalMe Wi-Fi and visit 192.168.43.1 in the browser
  • Select 【SIM】 in the section of SIM Card Selection

Light Indicator

【TriForce Light Indicator】

GlocalMe-Triforce-4G-LTE-Mobile-Hotspot-FIG-1 \(12\)

Warning

  • Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy.
  • The SAR limit is 1.6 watts per kilogram in countries that set the limit averaged over 1 gram of tissue and 2.0 watts per kilogram in countries that set the limit averaged over 10 grams of tissue.
  • During testing, the devices are set to their highest transmission levels in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.

EU Regulatory conformance

  • The device complies with RF specifications and when used with an accessory that contains no metal and that positions the device a minimum of 0.5 cm from the body.
  • The SAR limit adopted is 2.0W/kg averaging over 10 grams of tissue.
  • The highest SAR value reported for the device when properly worn on the body complies with the limit. Hereby, HONG KONG UCLOUDLINK
  • NETWORK TECHNOLOGY LIMITED declares that this device is in compliance with the essential requirements and other relevant provisions of Directive (RED) 2014/53/EU.

FCC

FCC Regulatory conformance
For body-worn operation, the device complies with FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the device a minimum of 1.0 cm from the body. The SAR limit adopted by the FCC is 1.6W/kg averaging over 1 gram of tissue. The highest SAR value reported for the device when properly worn on the body complies with the limit. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause.

Undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur during installation. If the device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is suggested to try to correct the interference by the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the distance between the equipment and the receiver.
  • Connect the equipment to an outlet on a different circuit to the receiver.
  • Consult the manufacturer or an experienced radio/TV technician for help.

Information on the disposal and recycling of the device This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal. For detailed information about device or battery recycling, contact your local city office, household waste disposal service, or retail store. Disposal of the device and batteries (if included) is subject to WEEE  Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risks of any hazardous substances that may be present. Do not disassemble or modify, do not short-circuit, do not dispose in fire, do not expose to high temperature, be disabled after soaking. Do not squeeze or bump the battery. Do not continue to use it if serious. Copyright © 2022 cloud link All Rights Reserved

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals