AJAX WSJxxxxNA Remote Control Relay User Guide
- June 14, 2024
- ajax
Table of Contents
AJAX WSJxxxxNA Remote Control Relay
Specifications
Unfortunately, the provided text does not contain any information about the product specifications. Please refer to the product user manual or contact our customer support for detailed specifications.
Operating frequencies| 905-926.5 MHz FHSS (complies with part 15 of the FCC
rules)
---|---
RF Power Density| <=0.0300 W
Radio signal range| up to 3,200 ft (line-of-sight)
Power supply voltage range| 110-230 V~ ± 10% 50/60 Hz
Device energy consumption| less than 1 W
Overvoltage protection| yes, min – 184 V, max – 253 V
Maximum load current| 13A
Output power (resistive load 230 V)| up to 3 kW
Max. temperature protection| yes, over 149°F
Operating temperature range| from 32° to 147°F
Operating humidity| up to 75%
Dimensions| 1.54, 1.3, 0.70′
Weight| 1,08 oz
Product Usage Instructions
-
Step 1: Unpacking
Start by unpacking the product from its packaging. Remove all protective materials and check for any visible damages. If you notice any damages, please contact our customer support immediately. -
Step 2: Power Supply
Ensure that the product is connected to a suitable power source. Check the user manual or the product label for the specific power requirements. Use only the provided power adapter and avoid using any incompatible power sources. -
Step 3: Assembly
If your product requires assembly, carefully follow the instructions provided in the user manual. Ensure that all parts are securely attached and tightened according to the provided guidelines. -
Step 4: Initial Setup
Once the product is powered on, follow the on-screen instructions or refer to the user manual to complete the initial setup process. This may include language selection, date and time settings, and other configuration options. -
Step 5: Product Operation
Refer to the user manual for detailed instructions on how to operate the product. Familiarize yourself with the different buttons, controls, and features. Pay attention to any safety precautions mentioned in the manual. -
Step 6: Maintenance and Cleaning
To ensure optimal performance and longevity of the product, regular maintenance and cleaning are recommended. Follow the maintenance guidelines provided in the user manual. Use only recommended cleaning agents and avoid exposing the product to excessive moisture. -
Step 7: Troubleshooting
If you encounter any issues or difficulties while using the product, refer to the troubleshooting section of the user manual. Follow the suggested solutions or contact our customer support for further assistance.
FAQ
Q: What should I do if the product does not turn on?
A : First, make sure the product is properly connected to a power source.
Check if the power adapter is securely plugged in. If the issue persists, try
using a different power outlet or contact our customer support for further
assistance.
Q: How often should I clean the product?
A : The frequency of cleaning depends on the product and its usage.
Generally, it is recommended to clean the product at least once a month or as
per the guidelines provided in the user manual.
Avoid using abrasive materials or harsh chemicals for cleaning.
Q: Can I use third-party accessories with the product?
A : It is recommended to use only accessories that are specifically
designed for the product. Third-party accessories may not be compatible and
could potentially damage the product or void the warranty. Refer to the user
manual for a list of recommended accessories.
Complete set
- WallSwitch Jeweller;
- Connecting wires – 2 pcs;
- Quick
- Start Guide
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with a minimum distance between 20 cm the
radiator and your body: Use only the supplied antenna.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications However,
there is no guarantee that interference will not occur ln a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Regulatory Compliance
This device contains a licence-exempt transmitters)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
To maintain compliance with ISED’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body: use only the supplied antenna.
Warranty:
Warranty for Ajax devices is valid for two years after the purchase date. If
the device does not work correctly, you should first contact the support
service – in half of the cases, technical issues can be solved remotely.
The full text of the warranty is available on the website:
www.ajax.systems/warranty.
User Agreement : www.ajax.systems/end-user-
agreement.
Technical support: support@ajax.systems
The manufacturing date is indicated on a sticker at the bottom of the box. The
importer’s name, location, and contact details are indicated on the package.
Manufacturer: AS Manufacturing” LLC.
Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine.
www.aiax.svstems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>