CREATIVE EF1080 Wireless Bone Headphones Equipped Instructions

CREATIVE EF1080 Wireless Bone Headphones Equipped

General information

1. Magnetic charging port
2. LED indicator
3. Volume up button
4. Multi-function button (on/off, play/pause, calls/call Bluetooth®, low delay enable/disable)
5. Volume down button
6. Omnidirectional microphone

Multipoint pairing

Multipoint pairing

1. Disconnect the headphones from the first mobile device. When disconnected, the headphones will automatically switch into Bluetooth pairing mode.
2. On the second mobile device from the list of detected devices, select headphones to pair them.
3. After successfully pairing with the second device portable device, reconnect the first device portable with headphones to complete pairing Multipoint.

The Multipoint connection will be established after execution above steps in the given order and switching on the Bluetooth function on both mobile devices.

Controls

Turn on/off

| ****

| ****

Manually initiate Bluetooth pairing

__

| __

Note: Creative Outlier Free headphones will automatically initiate Bluetooth pairing when first turned on the power supply. To manually enter Bluetooth pairing mode, once the headphones are paired with your device, you need to turn off your headphones first.

Playback mode

Button Share

Connection mode

Button Share

Note: Voice assistant and low latency features can only be turned on when the device is not playing sound.

LED indicators

Charging your Outlier Free headphones

• Before connecting the headphones to the charger, make sure the magnetic charging cable is properly connected connected to the magnetic charging port. if connected incorrectly or not secured, unplug it and then reconnect it to your headphones.
• Correct connection of the headphones to the cable for charging will prevent short circuits when the wire current flows.

Master Reset

• To initiate a master reset, switch your headphones to mode Bluetooth pairing, then press simultaneously the volume up and down buttons and hold them for five seconds. Before turning it off will be played on the Outlier Free headphones voice command “Power Off”.
• The master reset is used when an occurrence occurs problems when using headphones or in the following situations: Bluetooth pairing error, Random flashing LED indicators or necessity to clear all data.

Technical data

• Headphone transducers: transducers for conductivity of bone marrow
• Frequency response: 20-20,000 Hz
• Microphones: one omnidirectional
• Bluetooth version: Bluetooth 5.3 Bluetooth profiles
  • A2DP (Advanced Audio Distribution Profile)
  • AVRCP (Audio/Video Remote Control Profile)
  • HFP (Hands-free Profile)
• Audio codec: SBC
• Operating frequency: 2402-2480 Hz
• Operating range: up to 10 m
• Voice assistant support: Siri and Google Assistant
• Playtime: up to 10 hours*
• Charging time: 2 hours
• Charging interface: USB-A
• Battery type: lithium-ion polymer battery 180 mAh, 0.666 Wh
• Input current: 5V 1A
• Operating temperature: 0-45°C
• Maximum RF output power: 4 dBm
• Degree of protection: IPX5

*Based on moderate volume level. Actual battery life will vary depending on usage, settings, songs and conditions environmental

creative.com/support/OutlierFree.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>