BELLEVUE QZCF86690MBKGL Tubi 20 Wide LED Flush Mount Ceiling Fixture Instruction Manual
- June 14, 2024
- BELLEVUE
Table of Contents
BELLEVUE QZCF86690MBKGL Tubi 20 Wide LED Flush Mount Ceiling Fixture
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install, or operate the product.
WARNING
RISK OF ELECTRIC SHOCK- Before beginning installation, turn off electricity at
the circuit breaker box or the main fuse box.
CAUTION
For your safety, read the instructions completely before beginning
installation. If in doubt about electrical installation, consult a licensed
electrician.
TOOLS REQUIRED
| TOOLS REQUIRED | TOOLS REQUIRED |
|---|---|
| TOOLS REQUIRED | Wattage |
| TOOLS REQUIRED | 35W |
| TOOLS REQUIRED | 35W |
CARE AND MAINTENANCE
- Wipe clean using a soft, dry cloth or static duster.
- Always avoid using harsh chemicals and abrasives to clean fixtures as they may damage the finish.
PACKAGE CONTENTS
MOUNTING HARDWARE
INSTALLATION
- Remove Shade From Fixture Body
- Install Mounting Screws to Crossbar
Determine mounting holes for mounting screws
Install mounting screws
-
DO NOT screw mounting screws all in the crossbar. Leave a minimum length of 5/8″ for the next installations. 3. Install Crossbar 4. Install Wall Anchors
Fit slot holes to mounting screws and rotate the fixture body until it is hung on the mounting screws safely.
Mark anchor hole locations on the ceiling
Remove fixture Body
Drill holes for wall anchors from marks
Install wall anchors into drilled holes-
Wiring
-
Hang Fixture Body to Mounting Screws
-
Install Screws
Tighten all screws (include mounting screws). -
Install Shade Back to Fixture Body
-
Your installation is now complete! Restore electricity and save this sheet for future reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>