KLARSTEIN 10032345 Floor Fan Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
KLARSTEIN 10032345 Floor Fan Instruction Manual
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damages. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
SAFETY INSTRUCTIONS
- All users of this appliance must read and understand this instruction manual before operating.
- Make sure that all electrical connections are kept clean. Ensure that they are kept dry.
- Before using, check that the voltage power corresponds to the one shown on the appliance rating label.
- Do not place appliance close to the fire, water or flammable substances.
- Close supervision is necessary when any appliance is used by or near children
- Make sure that the fan is on a flat and secure surface before being switched on.
- If not used, please shut down the power supply, pull out the plug. Do not unplug by pulling on the supply cord, and ensure that handles kept dry
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailled information about recycling of this product, please contact your local council or your household waste disposal service.
CARE AND CLEANING
- Make sure that the appliance is switched OFF, unplugged and completely cool before cleaning or attempting to store.
- Do not immerse power cord, or any other chemical liquid. Wipe the exterior with a soft damp cloth or sponge. Remove stubborn spots with a cloth moistened with mild liquid detergent. Do not use abrasive scouring pads or powders.
- Do not clean the appliance using chemical like methylbenzene, javelle . You can use neutral cleaner to clean the fan.
- Using soft fabric to clean the appliance. Do not use the hard fabric to destroy the surface.
- You must do maintenance before storing.
- Mustn’t wash appliance using water. That will result in short out an may destroy the fan.
PRODUCT DESCRIPTION
Note: You can choice remote control or control panel of fan to operate.
ASSEMBLY
-
Ensure that the product is switched off and disconnected from the power supply.
-
Place the main unit onto the stand. Secure the main unit with the main unit’s nut.
-
Place the back guard onto the main unit. Make sure to align the insets of the main
unit with the grooves on the back guard . -
Secure the back guard with the back guard‘s nut.
-
Place the blade on the shaft. The cross pin on the shaft must fit into the indentation
on the rear part of the blade. -
Secure the blade with the spinner.
-
Place the front guard onto the guard collar. Make sure the 8 grooves on the guard collar properly click into place at the edge of the front guard. The hook of the guard collar needs to be hooked into the rear guard.
-
Secure both guards with the locking hinged clip and secure with a screw.
Height adjustment
- Push and hold the height adjustment button.
- Pull the upper part of the main unit up/down to choose an optimal position.
- Release the height adjustment button.
OPERATION
Remote Control
- Control distance have 3.5~5 meter.
- Light mode: Press the button will close the light.
- Please refer to the below other functions.
- Mute mode: Starting up default is close, Press the button will open mute function.
Speed Knob
Clockwise the rotary knob will control wind speed from low to high. That has
12 set can be chosen. And LED light will display corresponding wind speed.
Timer
Pressing the timer button can set mini shutoff. The timer function can be set
to longest 7.5 hours per 0.5 hours. And LED light can show working situation.
Mode
- Starting up default normal mode
- After pressing the mode button, that has three mode can be chosen: normal mode, natural mode, sleeping mode.
- Natural mode: The wind can imitate natural wind.
- Sleep wind: The wind can be smaller and smaller accompany with your sleeping.
OSC (lift/right swing)
After pressing the OSC button, the fan can automatically oscillate by left &
right.
ON/OFF Button
After plug in, the red light can be lit. Pressing the on/off button can
starting up the fan.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>