RS PRO 8606870 Cartridge Heater 0.39 Inch 100 x 10mm Instruction Manual
- June 1, 2024
- RS PRO
Table of Contents
RS PRO 8606870 Cartridge Heater 0.39 Inch 100 x 10mm
Specifications
- Type: Cartridge Heater
- Installation: Internal
- Usage: Heating applications
- Power Source: Electric
Product Usage Instructions
Installation
Ensure the cartridge heater is installed internally according to the provided guidelines.
Start-Up Inspection
- Check that all terminal connections are tightened properly.
- Ensure there are no physical damages to the temperature sensors or any other part of the heater unit.
- Monitor the temperature to prevent it from exceeding the prescribed value for safety.
Maintenance
- Disconnect power before performing any maintenance servicing.
- Only qualified personnel should perform maintenance and repair tasks.
- Periodically check electrical connections for tightness to ensure proper functioning.
FAQ
Q: Can I install the cartridge heater externally?
A: No, the cartridge heater is designed for internal installation only to ensure safe and efficient operation.
Q: What should I do if the temperature exceeds the prescribed value?
A: Immediately turn off the heater and allow it to cool down before investigating the cause of overheating. It is recommended to contact a qualified technician for further assistance.
INSTALLATION
- Always follow the manufacturer’s instructions when installing and using a cartridge heater.
- Improper installation or use can result in damage to the heater or even injury to personnel.
- Do not touch the heater while it is in operation. The metal sheath can become extremely hot, and contact with the heater can result in burns or other injuries.
- Keep the area around the heater clear of flammable materials. This includes paper, fabric, and other materials that can ignite if they come into contact with the heater.
- Use a temperature controller to regulate the temperature of the heater. This will help prevent overheating and other hazards.
- Make sure that the heater is not exposed to water or other liquids. This can damage the heater or result in electrical shock.
- Check supply voltage with heater marking & user specifications before energizing.
- Check the Resistance Value before installation to check the healthiness of the heater.
- Do not take it out when the heater is in running Condition.
- Please avoid the high air gap near the heating surface of the cartridge heater.
START-UP INSPECTION
- Check that all terminal connections are tightened properly.
- Ensure no physical damage to the temperature sensors or any other part of the heater unit.
- To ensure the safety of the heater, monitor the temperature so that it does not exceed the prescribed value.
MAINTENANCE
- Disconnect power before performing any maintenance servicing.
- Maintenance and repair should be performed only by qualified personnel.
- Periodically check electrical connections for tightness.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>