Creative V3 Pebble Desktop Speakers User Manual
- June 14, 2024
- Creative
Table of Contents
Creative V3 Pebble Desktop Speakers User Manual
Overview
Disclaimer: If Pebble V3’s volume remains low when both device and speakers are at maxed volume while connected to a laptop’s USB port, connect the speakers to a 10W USB port instead to achieve optimum volume level
REARVIEW
Note: When plugged into a PC / Mac for the first time, Creative Pebble V3 will be in USB Audio mode by default. When plugged into a power source that does not support USB Audio for the first time, Creative Pebble V3 will be in Bluetooth Pairing mode by default
Setting Up Creative Pebble V3
Master Reset
Once Master Reset is complete, previously paired Bluetooth devices will be removed. Creative Pebble V3 will then return to its original default state.
Technical Specification
- Speaker Power: 2 x 4W RMS
- Total System Power: Up to 8W RMS, Peak Power 16W
- Drivers: 2.25” Full-range Drivers with Built-in Passive Radiators
- Wireless Technology: Bluetooth 5.0
- Bluetooth Profiles: A2DP (Wireless Stereo Bluetooth)
- Wireless Type: Bluetooth Classic
- Operating RF Range: 2402–2480 MHz
- Max. RF Output Power: < 4 dBm
- Input: 5V 2A
- Signal-to-Noise Ratio: 75 dB
- Frequency Response: 100–17,000 Hz
- Connectivity: USB Audio, Bluetooth, 3.5 mm Analog Stereo-in
- Operating Temperature: 0–45°C
Note: Up to 8W RMS when Gain is set to “High” while plugged into a 10W USB-C Port / USB-C Power Adapter / 5V 2A USB-A Power Adapter Adapter not included
Other Information
Please visit
creative.com/compliance/pebblev3
for the user guide, safety, and regulatory information.
Please visit
creative.com/support/pebblev3 for all
other support related to your product.
Note: Compliance markings are located at the bottom of the product
Download PDF:Creative V3 Pebble Desktop Speakers User Manual