Mounting Dream MD6230-M Studless Wall Mount TV Stand Instruction Manual
- June 14, 2024
- Mounting Dream
Table of Contents
Mounting Dream MD6230-M Studless Wall Mount TV Stand
Product Information
Specifications:
- Compatible TV VESA sizes: equal to/greater than 100x100mm/4×4 and equal to/less than 400x400mm/16×16
- Maximum TV weight: 100 LBS (45.5 kg)
- Wall thickness requirement: Greater than 3/8 (9.5mm)
Product Usage Instructions
Step 1: Check TV Compatibility
Before getting started, ensure that your TV meets the following requirements:
- Check if your TV VESA size is equal to or greater than 100x100mm/4×4 and equal to or less than 400x400mm/16×16. If yes, proceed to the next step. If no, this mount is not compatible with your TV.
- Check if your TV (including accessories) weighs less than 100 LBS (45.5 kg). If yes, proceed to the next step. If no, this mount is not compatible with your TV.
Step 2: Prepare Installation Tools
Gather the following tools for installation (not included):
- 2M Band Tape
- Pencil
- Screwdriver
- Hammer
- Bubble level
Step 3: Ensure Wall Compatibility
Before installation, consider the following:
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- The wall thickness must be greater than 3/8 (9.5mm).
- Drywall must be structurally sound, with smooth, flat walls free of patches, cracks, and water damage.
- Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulting from incorrect installation, incorrect assembly, or misuse.
Step 4: Assembly and Hardware
Verify all parts are included and undamaged before starting assembly. Not all hardware included will be used.
Refer to the provided diagram for detailed combination instructions:
- M4x12mm TV Screws
- M4x30mm Spacers
- M6x17mm Washers
- M6x12mm TV Screws
- M6x35mm TV Screws
- M8x22mm Washers
- M8x25mm TV Screws
- M8x45mm TV Screws
Step 5: Wall Mount Installation
For Drywall and wood installation, follow these steps:
- Using a level, mark the wall at the desired height.
- Hammer nails diagonally through the wall plate into the wall, ensuring the nail goes through two holes. Do not overforce to prevent nail looseness.
- Adjust the level and hammer in the remaining nails. The wall plate must be level when securing the hole at the other end.
- Tighten all 17 steel nails firmly to prevent unwanted movement of the wall plate assembly.
- Ensure the wall plate assembly is securely fastened to the wall before continuing to the next step.
Step 6: Mounting the TV
This step requires two or more people to finish. Follow these instructions:
- Plug the cables into the TV before hanging it.
- Pull down the straps while taking the TV off the wall mount.
FAQ (Frequently Asked Questions)
Q: What are the compatible VESA sizes for this mount?
A: The mount is compatible with VESA sizes equal to or greater than
100x100mm/4×4 and equal to or less than 400x400mm/16×16.
Q: Can I use this mount for a TV weighing more than 100 LBS (45.5 kg)?
A: No, this mount is only compatible with TVs weighing less than 100 LBS
(45.5 kg).
Q: What type of wall is suitable for installation?
A: The wall must have a thickness greater than 3/8 (9.5mm) and should be
structurally sound, with smooth, flat walls free of patches, cracks, and water
damage.
Q: What tools do I need for installation?
A: You will need a 2M band tape, pencil, screwdriver, hammer, and bubble
level. These tools are not included with the mount.
Q: What should I do if my TV does not meet the compatibility
requirements?
A: If your TV does not meet the VESA size and weight requirements, this
mount is not compatible. Please ensure your TV meets the specifications before
attempting installation.
MD6230-M
INSTALLATION INSTRUCTION
Before getting started, let’s make sure this mount is perfect for you!
-
Is your TV VESA equal to/greater than 100x100mm/4×4″ and equal to/less than 400x400mm/16×16″?
-
Does your TV (including accessories) weigh less than 100 LBS (45.5 kg)?
-
What is your wall made of?
-
Installation Tools (Not Included)
-
Safety Caution
Please read this instruction carefully before installation.- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not apply this product to any purpose not indicated by Mounting Dream.
- Before installation, make sure the wall thickness is greater than 3/8″.
- Drywall must be structurally sound, with smooth, flat walls free of patches and cracks and no water damage.
- Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
ASSEMBLY
STEP 1 Attach Brackets to TV
Parts and Hardware
WARNING:This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged.
NOTE: Not all hardware included will be used.
Wall mounting hardware
-
Select TV Screws
-
Need Spacer?
-
Attach the TV Brackets
NOTE: Choose proper washer or spacer that fits your particular TV mounting holes. -
Screw and washer
-
Spacer(s)screw and washer
Tips: If you need to combine M6 (e) or M8 (c/f) screw with 2.5mm spacer (j), you have to remove the inner circle.
No need washers (k) or (l) for screws (c) and (f).
STEP 2 Attach Wall Plate to Wall
For Drywall and wood installation, follow STEP 2
CAUTION: To avoid potential personal injury or property damage:
CAUTION: Avoid potential personal injuries and property damage!
- DO NOT mount to patched areas/drywall seams /uneven walls
- Your TV MUST be centered on the wall plate
STEP 3 Hang and Secure TV to Wall Plate
CAUTION: This step must require 2 or more people to finish.
CAUTION: Recommend to plug the cables and then hang the TV.
STEP 4 Take Off the TV from the Wall
CAUTION: Take TV off the wall mount while keeping pulling down the straps.
Product Dimensions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>