edelkrone 81228 Slide Module V3 User Manual
- June 5, 2024
- Edelkrone
Table of Contents
edelkrone 81228 Slide Module V3
WHAT’S IN THE BOX & THE BASICS
- Connection screws for Slide Module
- Shutter trigger cable port
- Link port
- Information screen
- On/Off Button
- Battery bracket ports
- DC IN socket & Cable
- Holder Port 2.5 mm Allen key
- Manual slide tension adjustment port
**ATTACHING BATTERY BRACKET
**
MOUNTING YOUR SLIDE MODULE TO YOUR SLIDERPLUS
- Detach manual slide control belt and attach the motion control belt.
- Attach Slide Module to SliderPLUS. Place the connection screws and tighten them
- Connect the batteries or power adapter to the DC IN socket.
- Connect shutter trigger cable to the shutter trigger cable port when you intend to shoot time-lapse and stop motion.
ADJUSTING TENSION
- Open Manual slide tension adjustment cover to reach the screw.
- Turn the allen key down and pull it out.
- Use the allen key to adjust the tension.
INCLINED MOTION
- To get inclined shots,
- You should attach your Slide Module to incline side of the SliderPLUS.
- You should tighten slide tension of the Slide Module to get inclined motion.
- Place your camera to FlexTILT Head or any camera head.
HOT SWAPPING
While your Slide Module V3 is in use, you may switch batteries without losing
connection or experiencing an interruption
START USING
- Download the edelkrone App to your mobile device from the App Store or
- Google Play. Links can be found at www.edelkrone.com/products/slide-module-v3edelkrone App will automatically pair with your Slide Module V3 through Bluetooth/Wifi. Slide Module V3 will turn on with a beep sound.
- You are now ready to use your Slide Module V3 for SliderPLUS. Just keep following the instructions on your mobile device or visit manuals.edelkrone.com for a detailed video instruction.
DISPOSAL OF THE PRODUCT & WARNINGS
Should the product become damaged beyond repair, or if you wish to dispose of
it, it must be disposed separately from the municipal waste stream via
designated collection facilities appointed by the government or the local
authorities. Observe the regulations of your area and country that relate to
the disposal of electronic products. Keep your electronic Motion Control Unit
away from all sorts of liquids. In order to preserve your Motion Control Unit
and battery performance at their best, use the exact same type of batteries
with an equivalent level of charge during dual-battery operation.
Do not attempt to disassemble or modify any internal parts of your Motion
Control Unit. If the device appears to be malfunctioning, discontinue use
immediately and contact support for qualified service.Never force a different
type of connector into a port. Never use or store your Motion Control Unit in
areas subject to extreme temperatures, or high levels of vibration. If your
motion control unit becomes unresponsive, disconnect and re-connect the power
source. Make sure your DC adapter is plugged in or your batteries are properly
charged. If the problem persists, contact our support team. Environmental
factors may affect your Motion Control Unit’s performance. Keep your product
away from environmental hazards such as dust or heavy resonance. Do not use
chemical materials to clean your product.
- Only use included battery plate, DC adapter or equivalent power sources.
- Use of an inappropriate power source may permanently damage your Motion Control Unit.
- If there is an impairment on the power or connector cable, stop using the Motion Control Unit immediately.
- Avoid dropping or causing physical damage to your Motion Control Unit.
- Do not place heavy objects on top of your Motion Control Unit.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>