Mounting Dream MD5412 Speaker Stand Installation Guide
- June 6, 2024
- Mounting Dream
Table of Contents
Mounting Dream MD5412 Speaker Stand
INSTALLATION INSTRUCTION
- Please read this instruction carefully before installation.
- Weight capacity: 6 kg (13.2 lbs).
WARNING
Safety Warning: Thank you for choosing Mounting Dream speaker stand. For safe
application of model MD5412, and preventing yourself or others from danger or
property loss, please read through this manual before use. If you do not
understand these instructions or have any doubt over safety of installation,
please contact qualified contractor or Mounting Dream customer service. Please
check carefully before assembly to ensure no parts missed or damaged. Our
customer service representative will assist you timely in installation to
solve the issue of parts shortage or damage. Replacement parts purchased
through authorized distributor will be delivered to your door. Please do not
use defective parts. Incorrect installation may result in product damage or
body injury. Do not apply this product to any purpose not indicated by
Mounting Dream. We shall bear no responsibility for any damage or injury
resulted from incorrect installation, incorrect assembly or misuse.
Installation tools
Part list
Hardware for stand assembly
Steps
Step 1 Insert bottom tube (B) into base (A),then fasten bolt (F) by using Allen key (H) .
Step 2 Insert adjustable tube (C) into bottom tube (B) and use Allen key (H) to fasten bolt (E).
Step 3 Insert the speaker attachment unit (D) into the adjustable tube (C), and use Allen key (H) to fasten bolt (G).
Step 4 Insert the speaker into the speaker attachment unit (D) .
Step 5 Height Adjustment