Mounting Dream MD2413-MX UL Listed TV Wall Mount Instruction Manual

MD2413-MX   INSTALLATION INSTRUCTION

x3                                            x1

    Max:400x400mm/16×16″
Min:75x75mm/3×3″

(C1)

Before getting started, let’s make sure this mount is perfect for you!

1 Is your TV VESA equal to/greater than 75x75mm/3×3″ and equal to/less than 400x400mm/16×16″?|

Yes — Perfect!
No — This mount is NOT compatible.

---|---
2 Does your TV (including accessories) weigh less than 77 LBS (35 KG)?|

Yes — Perfect!
No — This mount is NOT compatible.

3 What is your wall made of? | CAUTION:
DO NOT install into drywall alone

Drywall with wood studs?
Solid concrete wall?
4 Installation Tools (Not Included)|

Band Tape

Pencil

Screwdriver

Electrodrill

Socket Wrench
1/2″(13mm)

Wood Stud Install|

Stud Finder

Awl

5/32″(4mm)
Wood Drill Bit

Concrete Install|

3/8″(10mm)
Masonry Drill Bit

Hammer

5 Safety Caution| Please read this instruction carefully before installation.

• This product is designed for use in wood stud and solid concrete wall.
  – DO NOT install into drywall alone.

• The wall must be capable of supporting five times the weight of the TV and mount combined.

• Do not apply this product to any purpose not indicated by Mounting Dream.

• Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.

STEP 1 Attach TV Plate to TV

Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged.
NOTE: Not all hardware included will be used.

Allen Key

Extended Arm Screws
M6x8mm

TV Screws
M4x12mm                              M4x30mm

M6x12mm                             M6x35mm

M8x25mm                                        M8x45mm
             

Spacers
M6x17mm                  M8x22mm

10mm                          2.5mm

Washers
M4                                 M6

TV Plate Unit

Extended Arm                              Extended Arm

1-1 Disassemble TV Plate Unit into Two Pieces

1. TV Plate

1-2 Choose Configuration

400mm x 200mm

300mm x 300mm
400mm x 400mm

200mm x 300mm

75mm x 75mm
100mm x 100mm
100mm x 200mm
150mm x 150mm
200mm x 100mm
200mm x 150mm
200mm x 200mm

300mm x 200mm

400mm x 300mm

Extended Arms Assembly Example (For reference)

1. TV plate

1. TV plate

1-3 Select TV Screws

1-4 Need Spacer?

[I] No, go to PAGE 5 (I) for detailed combination.

1. Bracket
2. Short Screw
3. Washer
4. TV back

[II] Yes, go to PAGE 5 (II) for detailed combination.

1. Bracket
2. Long Screw
3. Washer
4. Spacer
5. TV back

1-5 Attach TV Plate to TV Back

(I) Screw and washer

(II) Spacer(s), screw and washer

Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to remove the inner circle.

STEP 2 Attach Wall Plate to Wall

For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B on PAGE 8

Parts and Hardware

Mounting Template                 Wall plate

Lag Bolt M7x55mm

Concrete wall anchor (NOT INCLUDED)

Concrete Wall Anchor
3pcs

STEP 2A Wood Stud Installation

1. Min. Wood Stud Size:
   nominal 4″(102mm)
   actual 3 1/2″(89mm)

2. Min. Wood Stud Size:
   nominal 2″(51mm)
   actual 1 1/2″(38mm)

1. Centre line
2. Mounting Template

CAUTION: To avoid potential personal injury or property damage:
All 3 lag bolts (01) MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the direction of the arrow should be upward as shown.

Go to Step 3 on PAGE 9.

STEP 2B Solid Concrete Wall Installation

1. Mounting Template

CAUTION: To avoid potential personal injury or property damage:
All 3 lag bolts (01) MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the direction of the arrow should be upward as shown.

1. Concrete Wall Anchor

STEP 3 Hang and Secure TV to Wall Plate

Before hanging TV, please conduct “wall plate installation integrity test” first.

STEP 4 Adjustments

4-1 TV leveling adjustment (±4°):

Loosen 2 leveling bolts on the rear of TV plate by maximum 2 turns, adjust to level, and retighten to secure.

1. Loosen
2. Tighten

4-2 Tilting angle adjustment (+5°/-15°)：

Pull TV to your desired angle then fasten 2 tilting bolts with Allen key (02).

1. Tilting bolts

Allen key storage: For easy adjustment, you might put the Allen key on the wall plate as illustration.

Product dimensions:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>