Mounting Dream MD2296 TV Mount Bracket User Manual
- June 3, 2024
- Mounting Dream
Table of Contents
Mounting Dream MD2296 TV Mount Bracket
INSTALLATION INSTRUCTION
- Max: 600x400mm/24×16″
- Min: 200x100mm/8×4″
Before getting started, let’s make sure this mount is perfect for you!
-
Is your TV VESA equal to/greater than 200x100mm/8×4″ and equal to/less than 600x400mm/24×16″?
-
Does your TV (including accessories) weigh less than 100 LBS (45.5 KG)?
-
What is your wall made of?
-
Installation Tools (Not Included)
Please read this instruction carefully before installation.- This product is designed for use in wood stud and solid concrete wall.
- DO NOT install into drywall alone.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not apply this product to any purpose not indicated by Mounting Dream.
- Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
-
Safety Caution
Attach Brackets to TV
Parts and Hardware
WARNING:This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged.
NOTE: Not all hardware included will be used.
Wall mounting and TV bracket assembly hardware
Part List
- 1-1 Select TV Screws
- 1-2 Need Spacer?
- 1-3 Attach the TV Brackets
NOTE: Choose proper washer or spacer that fits your particular TV mounting holes.
- Spacer(s)screw and washer
Attach Wall Plate to Wall
- For wood stud installation, follow STEP 2A
- For concrete installation, follow STEP 2B on PAGE 9
Wood Stud Installations
CAUTION: To avoid potential personal injury or property damage: All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step. To prevent the TV falling down, the Bolt Head Must Keep UP at this step!!
Hang and Secure TV to Wall Plate
- 3-1 Extension Bars Assembly
- 3-2 Wall Plate Installation Integrity Test
- Before hanging TV, please conduct “wall plate installation integrity test” first.
- 3-3 Hang and Secure TV to Wall Plate
ADJUSTMENTS
- 4-1 TV leveling adjustment (±4°): Loosen 4 leveling bolts on the rear of TV plate by maximum 2 turns, adjust to level, and retighten to secure.
- 4-2 Tilting angle adjustment (+5°/-15°): Pull TV to your desired angle then fasten 2 tilting bolts with Allen key
- Allen key storage: For easy adjustment, you might put the Allen key on the wall plate as illustration.
Product dimensions
Solid Concrete Wall Installation
Concrete wall anchor NOT INELUDED) If you do need concrete anchor, please contact us Via Amazon to get it CAUTION: To avoid potential personal injury or property damage: All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step. To prevent the TV falling down, the Bolt Head Must Keep UP at this step !!