Mounting Dream MD2617 Listed Full Motion TV Mount Instruction Manual
- June 14, 2024
- Mounting Dream
Table of Contents
Mounting Dream MD2617 Listed Full Motion TV Mount
Before getting started, let’s make sure this mount is perfect for you!
- Is your TV VESA equal to/greater than 200x100mm/8×4″ and equal to/less than 600x400mm/24×16″?
- Does your TV (including accessories) weigh less than 100 LBS (45.5 KG)?
- What is your wall made of?
- Installation Tools (Not Included)
- Safety Caution
Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please feel free to contact our Customer Service.
- This product is designed for use in wood studs and solid concrete walls.
- DO NOT install into drywall alone.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not apply this product to any purpose not indicated by Mounting Dream.
- Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulting from incorrect installation, incorrect assembly or misuse.
STEP 1 Attach Brackets to TV
Parts and Hardware
WARNING:This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged. For parts shortage or damage, please feel free to contact our
Customer Service.
NOTE: Not all hardware included will be used.
Select TV Screws
Need Spacer?
-
No, go to PAGE 3 for a detailed combination.
-
Yes, go to PAGE 3 for a detailed combination.
Attach the TV Brackets
Screw and washer
Spacer(s), screw and washer
Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to remove the inner circle.
STEP 2 Attach Wall Plate to Wall
- For wood stud installation, follow STEP 2A
- For concrete installation, follow STEP 2B on PAGE 6
Parts and Hardware
Assemble Wall plate When 16″ < wood studs spacing ≤ 24″
Wood Stud Installations
CAUTION: To avoid potential personal injury or property damage:
- All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
- To prevent the TV from falling down, the Bolt Head Must Keep UP at this step!!
Solid Concrete Wall Installation
CAUTION: To avoid potential personal injury or property damage:
- All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
- To prevent the TV from falling down, the Bolt Head Must Keep UP at this step!!
STEP 3 Hang and Secure TV to Wall Plate
Parts and Hardware
Extension Bars Assembly
Wall Plate Installation Integrity Test
- Before hanging TV, please conduct “wall plate installation integrity test” first.
- Hang and Secure TV to Wall Plate
STEP 4 Adjustments
- TV leveling adjustment (±4°):
- Loosen 4 levelling bolts on the rear of the TV plate by a maximum of 2 turns, adjust to level, and retighten to secure.
- Tilting angle adjustment (+5°/-15°)： Pull TV to your desired angle then fasten 2 tilting bolts with Allen key
Allen key storage: For easy adjustment, you might put the Allen key on the wall plate as an illustration.
STEP 5 Cable Management
Product dimensions
