TELTONIKA ECAN02 New Contactless Can Data Reading Solution Instruction Manual
- June 14, 2024
- teltonika
Table of Contents
TELTONIKA ECAN02 New Contactless Can Data Reading Solution
Product Information
Specifications
- Product Name: ECAN02
- Product Type: Contactless CAN Data Reading Solution
- Upgraded Features: LED light indicator, stronger construction, better wire clamping
- CAN-BUS Speed: Up to 1000 kb/s
- Supported Devices: LV-CAN200, ALL-CAN300, FMB630, FMX640, FMC650, FMB641, FMB140, FMB240, FMX150
Product Usage Instructions
Step 1: Installation
- Ensure that the vehicle’s power supply is turned off before installation.
- Locate the CAN Bus network in your vehicle. It is usually found near the dashboard or under the steering wheel.
- Connect the ECAN02 device to the CAN Bus network. Make sure to match the correct connectors.
- Tighten the wire clamps securely to ensure a stable connection.
- Turn on the vehicle’s power supply and check if the LED light on the ECAN02 device is indicating that the CAN lines are readable and the installation is correct.
Step 2: Data Reading
Once the ECAN02 device is successfully installed, you can start accessing
data from the CAN Bus network remotely. To access the data, you will need to
connect a tracking device compatible with ECAN02 to receive and analyze the
data. Follow the instructions provided with your tracking device to establish
a connection between the ECAN02 and the tracking device. Once the connection
is established, the tracking device will be able to receive and interpret the
data collected from the CAN lines.
Step 3: Product Compatibility
The ECAN02 device is compatible with the following devices:
- LV-CAN200
- ALL-CAN300
- FMB630
- FMX640
- FMC650
- FMB641
- FMB140
- FMB240
- FMX150
FAQ (Frequently Asked Questions)
-
Q: Is it safe to use the ECAN02 device?
A: Yes, the ECAN02 device ensures safe and reliable CAN Bus data reading without damaging the wires of the vehicle. -
Q: Can I install the ECAN02 myself?
A: Yes, the ECAN02 device is designed for fast and easy installation. However, if you are not familiar with vehicle electronics, it is recommended to seek professional assistance. -
Q: What is the warranty coverage for the ECAN02?
A: The ECAN02 device is warranty-friendly, meaning it does not require physical wire connections and keeps the original wires intact. Please refer to the warranty terms and conditions provided by the manufacturer for detailed coverage information. -
Q: What is the maximum speed supported by the ECAN02?
A: The ECAN02 device supports CAN-BUS speeds up to 1000 kb/s. -
Q: Can I use the ECAN02 for fleet maintenance in the agriculture industry?
A: Yes, the ECAN02 can be used for fleet maintenance schedules in the agriculture industry. It allows remote access to CAN Bus data for efficient monitoring and maintenance. -
Q: Can the ECAN02 be used for predictive maintenance of emergency vehicles?
A: Yes, the ECAN02 is suitable for predictive maintenance of emergency vehicles. It provides access to real-time data from the CAN Bus network, allowing early detection of potential issues and timely maintenance.
INTRODUCTION
Upgraded version of small and modern device, merging into providing full solution – fast and easy installation, that connects into the CAN Bus network to remotely access data without damaging the wires and then forward signals to tracking device.
- WIKI ECAN02
- WEBPAGE ECAN02
WHAT`S NEW
- Collecting all available data received from connected CAN lines.*
- LED light which indicates if CAN lines are readable and installation is correct.
- Upgraded casing – stronger construction and better wire clamping.
ADDITIONAL VALUES
- Warranty friendly – no physical wire connections, original wires are intact.
- Fast and easy to install.
- Safe and reliable CAN Bus data reading.
- Supports LV-CAN200, ALL-CAN300, FMB630, FMX640, FMC650, FMB641, FMB140, FMB240 and FMX150.
USE CASES
References
- Fleet Maintenance Schedules For Agriculture
- Automated Drivers’ Time Tracking And Identification
- ECAN02 - Wiki Knowledge Base | Teltonika GPS